Modification of electrophoretically deposited nano-hydroxyapatite coatings by wire brushing on Ti–6Al–4V substrates
Source abstract
Abstract
Abstract In the present study, after successful synthesis of nano-HA powders by chemical precipitation method, wire-brushing (WB) treatment was effectively employed on Ti–6Al–4V substrates for the modification of electrophoretically deposited nano-hydroxyapatite coatings. The precipitated nano-HA particles were characterized by XRD, FT-IR, and DLS analyses. The morphology and particle size of synthesized nano-HA particles was observed by FE-SEM. The Ti–6Al–4V plates were initially wire brushed at different times and rotational speeds. Microhardness profile and AFM analysis of substrates were then studied. It was found that WB treatment at 16,000 rpm for 60 s leads to a maximum enhancement in the hardness and roughness of surface. Then, the electrophoretic deposition of nano-HA particles was carried out at constant voltage of 30 V and after 60 s. The results of adhesion test and potentiodynamic polarization measurements showed that WB treatment on Ti–6Al–4V substrates could efficiently increase the bonding strength between coating and substrate as well as corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Electrophoretic Deposition in Materials Science · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Ti based biomaterials, the ultimate choice for orthopaedic implants–A review10.1016/j.pmatsci.2008.06.004 ↗
2. Calcium phosphate coatings for bio-implant applications: materials, performance factors, and methodologies10.1016/j.mser.2009.05.001 ↗
3. Studies on plasma sprayed bi-layered ceramic coating on bio-medical Ti–13Nb–13Zr alloy10.1016/j.ceramint.2010.12.012 ↗
4. Evaluation of hydroxyapatite and β-tri calcium phosphate microplasma spray coated pin intra-medullary for bone repair in a rabbit model10.1016/j.ceramint.2011.01.005 ↗
5. Effects of manganese doping on properties of sol–gel derived biphasic calcium phosphate ceramics10.1016/j.ceramint.2011.06.033 ↗
6. Sol–gel derived alumina–hydroxyapatite–tricalcium phosphate porous composite powders
7. Collagen modulating crystallization of apatite in a biomimetic gel system10.1016/j.ceramint.2011.03.019 ↗
8. Preparation, biomimetic apatite induction and osteoblast proliferation test of TiO2-based coatings containing P with a graded structure10.1016/j.ceramint.2009.01.007 ↗
9. Ion implantation of titanium based biomaterials10.1016/j.pmatsci.2011.03.002 ↗
10. Electrophoretic deposition of carbon nanotube-reinforced hydroxyapatite bioactive layers on Ti–6Al–4V alloys for biomedical applications10.1016/j.ceramint.2007.06.007 ↗
11. Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti10.1016/j.ceramint.2011.07.065 ↗
12. Electrophoretic deposition of biomaterials10.1098/rsif.2010.0156.focus ↗
13. Sintering effect on mechanical properties of composites of natural hydroxyapatites and titanium10.1016/j.ceramint.2009.04.004 ↗
14. Preparation of hydroxyapatite coating on smooth implant surface by electrodeposition10.1016/j.ceramint.2010.08.018 ↗
15. Studies on novel bioactive glasses and bioactive glass-nano-Hap composites suitable for coating on metallic implants10.1016/j.ceramint.2010.10.025 ↗
16. Titania/hydroxyapatite bi-layer coating on Ti metal by electrophoretic deposition: characterization and corrosion studies10.1016/j.ceramint.2011.12.026 ↗
17. Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition10.1016/j.surfcoat.2007.09.031 ↗
18. Electrophoretic deposition of nanocomposite (HAp+TiO2) on titanium alloy for biomedical applications10.1016/j.ceramint.2011.12.056 ↗
19. Hydroxyapatite-coated metals: interfacial reactions during sintering10.1007/s10856-005-5995-6 ↗
20. Surface integrity in electro-discharge machining, ultrasonic machining, and diamond saw cutting of ceramic composites10.1016/S0272-8842(00)00024-9 ↗
21. Surface modification by electrical discharge machining: A review10.1016/j.jmatprotec.2008.09.032 ↗
22. Surface topography effect on galling resistance of coated and uncoated tool steel10.1016/j.surfcoat.2011.11.041 ↗
23. Electropolishing of AISI-304 stainless steel for protection against SRB biofilm10.1016/j.surfcoat.2011.11.046 ↗
24. Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques10.1016/j.surfcoat.2011.12.026 ↗
25. Deposition of substituted apatites onto titanium surfaces using a novel blasting process10.1016/j.surfcoat.2009.08.014 ↗
26. Effect of surface treatments on the fatigue life of titanium for biomedical applications10.1016/j.jmbbm.2010.03.006 ↗
27. Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media10.1016/j.biomaterials.2005.08.012 ↗
28. Interrogations on the sub-surface strain hardening of grit blasted Ti–6Al–4V alloy10.1016/j.surfcoat.2009.02.003 ↗
29. Enhanced in vitro biocompatibility of ultrafine-grained titanium with hierarchical porous surface10.1016/j.apsusc.2011.01.062 ↗
30. Preparation and in vitro characterization of aerosol-deposited hydroxyapatite coatings with different surface roughnesses10.1016/j.apsusc.2011.04.031 ↗
31. Biological responses to hydroxyapatite surfaces deposited via a co-incident microblasting technique10.1016/j.biomaterials.2009.09.067 ↗
32. Bioactive glass ceramics: properties and applications10.1016/0142-9612(91)90194-F ↗
33. Cullity · 1977
34. Densification behaviour and mechanisms of synthetic hydroxyapatites10.1016/S0955-2219(00)00154-0 ↗
35. Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization10.1016/j.actbio.2004.09.008 ↗
36. Progress in nanoparticles characterization: sizing and zeta potential measurement10.1016/j.partic.2007.12.002 ↗
37. Influence of stacking-fault energy on high temperature creep of alpha titanium alloys10.1016/j.scriptamat.2006.02.036 ↗
38. Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium10.1016/j.msea.2011.10.062 ↗
39. Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition10.1016/j.apsusc.2009.02.086 ↗
40. Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗