Thermophysical performances of (La1/6Nd1/6Yb1/6Y1/6Sm1/6Lu1/6)2Ce2O7 high-entropy ceramics for thermal barrier coating applications
Source abstract
Abstract
Abstract In this study, a novel high-entropy oxide of (La1/6Nd1/6Yb1/6Y1/6Sm1/6Lu1/6)2Ce2O7was prepared using a sol–gel and high-temperature sintering technology. Additionally, its lattice structure, micro-morphology, elemental composition, and thermophysical and mechanical properties were evaluated. The results revealed that the obtained oxide powder has a typical fluorite-type lattice with particle sizes in the range of∼30–100 nm. The bulk sample has a dense microstructure and uniform elemental distribution. Owing to its low lattice order, the thermal expansion coefficient of (La1/6Nd1/6Yb1/6Y1/6Sm1/6Lu1/6)2Ce2O7 is greater than that of Sm2Ce2O7, which also exhibits excellent lattice stability up to 1200 °C. Further, owing to phonon scattering due to lattice distortion, oxygen vacancy, and cation substitution, the thermal conductivity of (La1/6Nd1/6Yb1/6Y1/6Sm1/6Lu1/6)2Ce2O7 is lower than that of Sm2Ce2O7, while its mechanical performance is inferior to that of 7YSZ.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear materials and radiation effects · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Development of deposition beam current dependent microstructure and nanomechanical properties in ZrO2-8wt%Y2O3 thermal barrier coatings produced by electron beam-physical vapor deposition technique10.1016/j.matchemphys.2021.124998 ↗
2. Thermochemical interaction of biofuel impurities with yttria-stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2021.05.189 ↗
3. Thermal cycling behavior of EB-PVD earth oxides co-doping ZrO2-based thermal barrier coatings10.1016/j.ceramint.2021.05.023 ↗
4. Spontaneusly formed nanostructures in double pervskite rare-earth tantalates for thermal barrier coatings10.1016/j.actamat.2021.117152 ↗
5. Influence of HfO2 alloying effect on microstructure and thermal conductivity of HoTaO4 ceramics10.1007/s40145-019-0336-2 ↗
6. Bending fracture behavior of freestanding (Gd0.9Yb0.1)2Zr2O7 coatings by using digital image correlation and FEM simulation with 3D geometrical reconstruction10.1007/s40145-019-0340-6 ↗
7. Recent advances in the thermal barrier coatings for extreme environments
8. Thermal barrier coating for diesel application—a review
9. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
10. Effect of Ti substitution for Zr on the thermal expansion property of fluorite-type Gd2Zr2O710.1016/j.matdes.2009.01.030 ↗
11. Influence of Gd2O3 addition on thermophysical properties of La2Ce2O7 ceramics for thermal barrier coatings10.1016/j.jeurceramsoc.2012.06.003 ↗
12. High-entropy ceramics: present status, challenges, and a look forward10.1007/s40145-021-0477-y ↗
13. Charge-induced disorder controls the thermal conductivity of entropy-stabilized oxides10.1002/adma.201805004 ↗
14. Colossal dielectric constant in high entropy oxides10.1002/pssr.201600043 ↗
15. Room temperature lithium super ionic conductivity in high entropy oxides10.1039/C6TA03249D ↗
16. High-entropy pyrochlores with low thermal conductivity for thermal barrier coatings10.1007/s40145-019-0342-4 ↗
17. (Y0.25Yb0.25Er 0.25Lu0.25)2(Zr0.5Hf0.5)2O7 a defective fluorite structured high entropy ceramic with low thermal conductivity and close thermal expansion coefficient to Al2O310.1016/j.jmst.2019.08.018 ↗
18. High entropy defective fluorite structured rare-earth niobates and tantalates for thermal barrier applications10.1007/s40145-020-0368-7 ↗
19. (TiZrHf)P2O7: an equimolar multicomponent or high entropy ceramic with good thermal stability and low thermal conductivity10.1016/j.jmst.2019.05.030 ↗
20. Lanthanum-cerium oxide as a thermal barrier-coating material for high temperature applications10.1002/adma.200304132 ↗
21. Investigation about thermophysical properties of Ln2Ce2O7 (Ln=Sm, Er and Yb) oxides for thermal barrier coatings10.1016/j.materresbull.2012.08.074 ↗
22. Estimation of heat capacity of solid mixed oxides10.1016/S0040-6031(02)00177-6 ↗
23. Relation between the parameters of the elasticity theory and averaged bulk modulus of solids10.1134/S106378421111020X ↗
24. Oxide pyrochlores—a review10.1016/0079-6786(83)90001-8 ↗
25. Influence of Ti addition on thermophysical properties of Sm2Ce2O7 oxides10.2298/PAC1801021C ↗
26. Raman spectra of oxides with the fluorite structure10.1063/1.1680227 ↗
27. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
28. Effect of Ti substitution for Zr on the thermal expansion property of fluotite-type Gd2Zr2O710.1016/j.matdes.2009.01.030 ↗
29. Thermal and mechanical performances of Nd2LaTaO7 oxide10.1016/j.ceramint.2019.02.144 ↗