Graphene oxide and montmorillonite enriched natural polymeric scaffold for bone tissue engineering
Source abstract
Abstract
Abstract In this study, the synergistic effect of graphene oxide (GO) and Montmorillonite (MMT) additives on the chemical, physical, mechanical, and biological properties of chitosan-gelatin (CS-Gel) scaffolds samples were investigated. FT-IR, XRD, Raman spectroscopy, and zeta potential analysis were used to investigate the accuracy of GO synthesis. Morphological studies of scaffold samples showed highly porous structure of all scaffold samples. The water absorption values of CS-Gel/GO and CS-Gel/GO/MMT samples were almost the same, but the highest value of water retention was observed for CS-Gel/GO scaffold. All scaffold samples showed the ability to form biomineral on the surface when exposed to SBF, although CS-Gel/GO/MMT scaffold had the best biomineralization ability. Considerable improvement in mechanical properties of scaffold samples were observed for CS-Gel/GO/MMT in comparison to CS-Gel scaffold, from 17.56 to 22.73 MPa for Young's modulus and from 0.14 to 0.2265 MPa for compressive strength. Protein adsorption of the scaffold was almost doubled in CS-Gel/GO/MMT samples compared to CS-Gel scaffold. Cell viability results indicated that none of the samples were cytotoxic and 30% of improvement in cell viability was observed for CS-Gel/GO/MMT scaffold in comparison to CS-Gel samples after 72 h of incubation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene and Nanomaterials Applications · Bone Tissue Engineering Materials · Nanoparticles: synthesis and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Bio-inspired in situ crosslinking and mineralization of electrospun collagen scaffolds for bone tissue engineering10.1016/j.biomaterials.2016.07.007 ↗
2. Alginate composites for bone tissue engineering: a review10.1016/j.ijbiomac.2014.07.008 ↗
3. Preparation and characterization of crosslinked chitosan/gelatin scaffolds by ice segregation induced self-assembly10.1016/j.carbpol.2015.12.064 ↗
4. Effectiveness of tissue engineered chitosan-gelatin composite scaffold loaded with human platelet gel in regeneration of critical sized radial bone defect in rat10.1016/j.jconrel.2017.03.040 ↗
5. A biomimetic extracellular matrix for cartilage tissue engineering centered on photocurable gelatin, hyaluronic acid and chondroitin sulfate10.1016/j.actbio.2013.10.005 ↗
6. Gelatin carriers for drug and cell delivery in tissue engineering10.1016/j.jconrel.2014.04.014 ↗
7. Chitosan‐functionalized graphene oxide as a nanocarrier for drug and gene delivery10.1002/smll.201100191 ↗
8. Polyethylene glycol and polyethylenimine dual‐functionalized nano‐graphene oxide for photothermally enhanced gene delivery10.1002/smll.201202538 ↗
9. Reduced graphene oxide‐gelMA hybrid hydrogels as scaffolds for cardiac tissue engineering10.1002/smll.201600178 ↗
10. Graphene-based nanomaterials for drug delivery and tissue engineering10.1016/j.jconrel.2013.10.017 ↗
11. Chitosan-graphene oxide 3D scaffolds as promising tools for bone regeneration in critical-size mouse calvarial defects10.1038/s41598-017-16599-5 ↗
12. Design and development of a biocompatible montmorillonite PLGA nanocomposites to evaluate in vitro oral delivery of insulin10.1016/j.clay.2017.06.031 ↗
13. Montmorillonite–chitosan–silver sulfadiazine nanocomposites for topical treatment of chronic skin lesions: in vitro biocompatibility, antibacterial efficacy and gap closure cell motility properties10.1016/j.carbpol.2013.10.029 ↗
14. Toxicological effects of a cationic clay, montmorillonite in vitro and in vivo10.1007/s13273-012-0012-x ↗
15. Poly (d, l-lactide-co-glycolide)/montmorillonite nanoparticles for oral delivery of anticancer drugs10.1016/j.biomaterials.2005.03.021 ↗
16. Strontium-modified chitosan/montmorillonite composites as bone tissue engineering scaffold10.1016/j.msec.2018.03.021 ↗
17. Adsorption of phenol and Cu (II) onto cationic and zwitterionic surfactant modified montmorillonite in single and binary systems10.1016/j.cej.2015.08.009 ↗
18. A study on sustained release formulations for oral delivery of 5-fluorouracil based on alginate–chitosan/montmorillonite nanocomposite systems10.1016/j.clay.2014.09.004 ↗
19. Olad · 2011
20. Graphene oxide powders with different oxidation degree, prepared by synthesis variations of the Hummers method10.1016/j.matchemphys.2015.01.005 ↗
21. Fabrication and characterization of chitosan/gelatin/nSiO2 composite scaffold for bone tissue engineering10.1016/j.ijbiomac.2013.04.023 ↗
22. The interplay between nanostructured carbon-grafted chitosan scaffolds and protein adsorption on the cellular response of osteoblasts: structure–function property relationship10.1016/j.actbio.2012.12.019 ↗
23. Structure of graphite oxide revisited10.1021/jp9731821 ↗
24. FT-IR study of montmorillonite–chitosan nanocomposite materials10.1016/j.saa.2010.08.053 ↗
25. The chemical and structural analysis of graphene oxide with different degrees of oxidation10.1016/j.carbon.2012.10.013 ↗
26. The synergetic effect of bioactive ceramic and nanoclay on the properties of chitosan–gelatin/nanohydroxyapatite–montmorillonite scaffold for bone tissue engineering10.1016/j.ceramint.2014.04.010 ↗
27. Biodegradation and bioresorption of poly (ɛ-caprolactone) nanocomposite scaffolds10.1016/j.ijbiomac.2015.04.056 ↗
28. Montmorillonite reinforced polymer nanocomposite antibacterial film10.1016/j.clay.2015.02.021 ↗
29. Effect of collagen‐glycosaminoglycan scaffold pore size on matrix mineralization and cellular behavior in different cell types10.1002/jbm.a.35567 ↗
30. Preparation of biomimetic three-dimensional gelatin/montmorillonite–chitosan scaffold for tissue engineering10.1016/j.reactfunctpolym.2006.12.002 ↗
31. A silk fibroin/chitosan scaffold in combination with bone marrow-derived mesenchymal stem cells to repair cartilage defects in the rabbit knee10.1007/s10856-013-4944-z ↗
32. Organic/inorganic hybrid network structure nanocomposite scaffolds based on grafted chitosan for tissue engineering10.1016/j.actbio.2011.01.029 ↗
33. Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size10.1089/ten.teb.2012.0437 ↗
34. Microwave-assisted synthesis of porous chitosan–modified montmorillonite–hydroxyapatite composite scaffolds10.1016/j.ijbiomac.2015.10.060 ↗
35. Preparation and characterization of carbon nanotube-grafted-chitosan–natural hydroxyapatite composite for bone tissue engineering10.1016/j.carbpol.2010.08.019 ↗
36. The mechanism of biomineralization of bone-like apatite on synthetic hydroxyapatite: an in vitro assessment10.1098/rsif.2004.0003 ↗
37. The synergistic effect of a hybrid graphene oxide–chitosan system and biomimetic mineralization on osteoblast functions10.1039/C3BM60192G ↗
38. Poly (ε-caprolactone)/graphene oxide biocomposites: mechanical properties and bioactivity10.1088/1748-6041/6/5/055010 ↗
39. Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties10.1016/j.carbpol.2013.01.065 ↗
40. Cellular interactions and modulated osteoblasts functions mediated by protein adsorption10.1002/adem.201180071 ↗
41. Biocompatibility of electrospun halloysite nanotube-doped poly (lactic-co-glycolic acid) composite nanofibers10.1163/092050610X550340 ↗
42. The role of surface wettability and surface charge of electrosprayed nanoapatites on the behaviour of osteoblasts10.1016/j.actbio.2009.08.012 ↗