The high porosity silicon nitride foams prepared by the direct foaming method
Source abstract
Abstract
Abstract Silicon nitride foams with porosity higher than 90% were fabricated by direct foaming method. The influence of the surfactant content, solid content and rotating speed on the foamability and stability of wet foams were discussed and the corresponding effect on the total porosity, pore size distribution and mechanical property of ceramic foams were systematically investigated. The results showed that the pore structure and porosity, the compressive strength of Si 3 N 4 ceramic foams could be controlled by tailoring surfactant and solid content. The results indicated that rotating speed had a great impact on the pore size distribution. Si 3 N 4 ceramic foams with porosity of 90.8–96.4% and compressive strength of 0.37–5.53 MPa were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pickering emulsions and particle stabilization · Advanced ceramic materials synthesis · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Processing and properties of macroporous silicon carbide ceramics: a review10.1016/j.jascer.2013.07.003 ↗
2. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
3. Ceramic foams: fabrication, properties and applications
4. Conventional and novel processing methods for cellular ceramics
5. Burnout behavior of ceramic coated open cell polyurethane (PU) sponges10.1016/j.jeurceramsoc.2009.07.025 ↗
6. Effect of recoating slurry compositions on the microstructure and properties of SiC reticulated porous ceramics10.1016/j.jeurceramsoc.2013.04.007 ↗
7. Open-cell reaction bonded silicon nitride foams: fabrication and characterization10.1016/j.jeurceramsoc.2013.09.011 ↗
8. Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former10.1016/j.ceramint.2011.06.013 ↗
9. Preparation of high open porosity ceramic foams via direct foaming molded and dried at room temperature10.1016/j.jeurceramsoc.2014.02.001 ↗
10. Particle-stabilized ultra-low density zirconia toughened alumina foams10.1016/j.jeurceramsoc.2013.03.027 ↗
11. Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method10.1016/j.jeurceramsoc.2010.03.018 ↗
12. Processing of particle-stabilized wet foams into porous ceramics10.1111/j.1551-2916.2007.01907.x ↗
13. Macroporous ceramics from particle‐stabilized wet foams10.1111/j.1551-2916.2006.01328.x ↗
14. Particles as surfactants—similarities and differences10.1016/S1359-0294(02)00008-0 ↗
15. Competitive adsorption of proteins and low-molecular-weight surfactants: computer simulation and microscopic imaging10.1016/j.cis.2003.08.003 ↗
16. Tailoring the microstructure of particle-stabilized wet foams10.1021/la0624844 ↗
17. Porous Si3N4 fabrication via volume-controlled foaming and their sound absorption properties
18. Ultralight silicon nitride ceramic foams from foams stabilized by partially hydrophobic particles10.1111/jace.14320 ↗
19. Pore structure control of Si3N4 ceramics based on particle-stabilized foams10.1007/s10934-011-9545-y ↗
20. Effect of rotating speed during foaming procedure on the pore size distribution and property of silicon nitride foam prepared by using protein foaming method
21. Preparation of high porous silicon nitride foams with ultra-thin walls and excellent mechanical performance for heat exchanger application by using a protein foaming method10.1016/j.ceramint.2015.09.128 ↗
22. Highly porous silicon nitride foam prepared using a route similar to the making of aerated food10.1111/ijac.12497 ↗
23. Preparation of Si3N4 foam ceramics with nest-like cell structure by particle-stabilized foams10.1111/j.1551-2916.2011.05017.x ↗
24. Controlling the microstructure of ceramic particle stabilized foams: influence of contact angle and particle aggregation10.1039/c1sm06477k ↗
25. Outstanding stability of particle-stabilized bubbles10.1021/la034042n ↗
26. Interfacial criteria for stabilization of liquid foams by solid particles10.1016/j.colsurfa.2003.09.016 ↗
27. On the equation of the maximum capillary pressure induced by solid particles to stabilize emulsions and foams and on the emulsion stability diagrams10.1016/j.colsurfa.2005.12.021 ↗
28. Effect of esterically bonded agents on the monolayer structure and foamability of nano-silica10.1016/j.colsurfa.2008.10.039 ↗
29. The effect of hydrophobicity on the drainage of gangue minerals in flotation froths10.1016/j.mineng.2004.04.005 ↗
30. Preparation and characterization of porous mullite ceramics via foam-gelcasting10.1016/j.ceramint.2015.03.237 ↗
31. Factors controlling the formation and stability of foams used as precursors of porous materials10.1016/j.jcis.2014.03.067 ↗
32. Ultralight alumina ceramic foams with single-grain wall using sodium dodecyl sulfate as long-chain surfactant10.1016/j.jeurceramsoc.2016.06.030 ↗
33. Effect of porosity and microstructure on the strength of Si3N4: designed microstructure for high strength, high thermal shock resistance, and facile machining10.1111/j.1151-2916.1997.tb03179.x ↗