Effect of carbon nanotubes and aluminum oxide on the properties of a plasma sprayed thermal barrier coating
Source abstract
Abstract
Abstract To protect the structural components of a power generating unit from the corrosive environment, thermal spray coatings are applied to the components. In the present work, four different types of thermal barrier coating (TBC) viz. partially stabilised zirconia (8YSZ), zirconia-20% alumina (ZA) composite coating without carbon nanotube (CNT) reinforcement, and ZA with 1% and 3% CNT reinforcement. The coating was deposited on NiCrAlY coated P91 steel using a plasma spraying process. The coating microstructure and phases were characterised using field emission scanning electron microscope (FE-SEM) with energy dispersive spectroscopy (EDS). The phases of the coating were analyzed using X-ray diffraction technique. The effect of CNT reinforcement on the thermal conductivity, porosity, and hardness of the composite coatings was investigated. The protective behavior of the coatings was characterised by potentiodynamic polarization testing and electrochemical impedance measurements. The thermal conductivity of the composite coating was found to be increased with increasing CNT content. Hardness was found to be highest for 3% CNT reinforcement and the thermal conductivity was found to increase with decreasing porosity. The electrochemical measurements indicate that reinforcement of CNT in zirconia alumina composite coating improved its corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. J.R. Davis, Davis and Associates, eds., Handbook of Thermal Plasma Spray, n.d.
2. Failure analysis of the wall tubes of a water-tube boiler10.1016/j.engfailanal.2017.05.032 ↗
3. Failure analysis on abnormal corrosion of economizer tubes in a waste heat boiler10.1016/j.engfailanal.2016.12.011 ↗
4. S. Chaudhuri, National Workshop on Boiler Corrosion, NML Jamshedpur, India, 11–12th April, 1995.
5. B.S. Sidhu, S. Prakash, Erosion-Corrosion of Plasma as Sprayed and Laser Remelted Stellite-6 Coatings in a Coal Fired Boiler, 260, 2006, pp. 1035–1044.10.1016/j.wear.2005.07.003 ↗
6. B.S. Sidhu, S. Prakash, Evaluation of the Corrosion Behaviour of Plasma-Sprayed Ni3Al Coatings on Steel in Oxidation and Molten Salt Environments at 900°C, 166, 2003, pp. 89–100.10.1016/S0257-8972(02)00772-7 ↗
7. Wear characteristics of Cr3C2-NiCr and WC-Co coatings deposited by LPG fueled HVOF10.1016/j.triboint.2009.12.016 ↗
8. The role of HVOF coatings in improving hot corrosion resistance of ASTM-SA210 GrA1 steel in the presence of Na2SO4 -V2O5 salt deposits10.1016/j.surfcoat.2005.07.008 ↗
9. Comparative characteristic and erosion behavior of NiCr coatings deposited by various high-velocity oxyfuel spray processes10.1361/105994906X150713 ↗
10. Characterization of oxide scales to evaluate high temperature oxidation behavior of Ni-20Cr coated superalloys10.1016/j.msea.2007.01.088 ↗
11. Performance of NiCrAlY, Ni-Cr, Stellite-6 and Ni3Al coatings in Na2SO4−60% V2O5 environment at 900 °C under cyclic conditions10.1016/j.surfcoat.2006.02.035 ↗
12. Characterisations of plasma sprayed and laser remelted NiCrAlY bond coats and Ni3Al coatings on boiler tube steels10.1016/j.msea.2003.10.281 ↗
13. Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni-20Cr and Stellite-6 coatings10.1016/j.jmatprotec.2004.05.023 ↗
14. Studies on the behaviour of stellite-6 as plasma sprayed and laser remelted coatings in molten salt environment at 900°C under cyclic conditions10.1016/j.jmatprotec.2005.08.018 ↗
15. Mechanical and microstructural properties of HVOF sprayed WC-Co and Cr 3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas10.1016/j.jmatprotec.2005.06.058 ↗
16. Solid particle erosion of HVOF sprayed NiCr and Stellite-6 coatings10.1016/j.surfcoat.2007.05.035 ↗
17. R.A. Miller, History of thermal barrier coatings for gas turbine engines emphasizing NASA’s role from 1942 to 1990, Nasa Tm—2009-215459. 215459, 2009, 29 pp.
18. Mechanical properties/database of plasma-sprayed ZrO2-8wt% Y2O3 thermal barrier coatings10.1111/j.1744-7402.2004.tb00184.x ↗
19. A comparative study on hot corrosion resistance of three types of thermal barrier coatings: YSZ, YSZ + Al2O3 and YSZ/Al2O310.1016/j.msea.2007.06.001 ↗
20. Thermal cycle properties of plasma sprayed YSZ/Al2O3 thermal barrier coatings10.1179/026708408X343591 ↗
21. Thermal shock resistance of Y-TZP with Palmqvist craks10.1016/S0955-2219(02)00065-1 ↗
22. Thermal fracture of thermal barrier coatings in a high heat flux environment10.1016/S0257-8972(98)00485-X ↗
23. Characterization of microstructural defects in plasma-sprayed thermal barrier coatings10.1007/BF02646967 ↗
24. Hot corrosion of YSZ/Al2O3 dispersed NiCrAlY plasma-sprayed coatings in Na2SO4-10wt% NaCl melt10.1016/j.corsci.2010.04.007 ↗
25. Bond coat oxidation and hot corrosion behavior of plasma sprayed YSZ coating on Ni superalloy
26. Hot corrosion behaviour of rare-earth magnesium hexaaluminate based thermal barrier coatings under molten sulphate-vanadate salts10.1016/j.surfcoat.2017.05.038 ↗
27. Multilayer thermal barrier coating (TBC) architectures utilizing rare earth doped YSZ and rare earth pyrochlores10.1016/j.surfcoat.2014.03.049 ↗
28. Comparison of oxidation behavior of YSZ and Gd2Zr2O7 thermal barrier coatings (TBCs)10.1016/j.surfcoat.2016.12.078 ↗
29. On the resistance of rare earth oxide-doped YSZ to high temperature volcanic ash attack10.1016/j.surfcoat.2016.09.033 ↗
30. Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation10.1016/j.surfcoat.2007.11.029 ↗
31. Hot corrosion resistance and mechanical behavior of atmospheric plasma sprayed conventional and nanostructured zirconia coatings10.1142/S201019451200267X ↗
32. Thermal properties and microstructure of two thermal barrier coatings10.1016/S0257-8972(09)90027-5 ↗
33. Microstructure, composition and property relationships of plasma- sprayed thermal barrier coatings10.1016/0257-8972(92)90055-F ↗
34. Current status of thermal barrier coatings - an overview10.1016/0257-8972(87)90003-X ↗
35. W. Ma, H. Dong. Ceramic Thermal Barrier Coating Materials, 2011.10.1533/9780857090829.1.25 ↗
36. Splat morphology of plasma sprayed aluminum oxide reinforced with carbon nanotubes: a comparison between experiments and simulation10.1016/j.surfcoat.2011.07.025 ↗
37. Microstructure and properties of Al 2O3/TiO2 nanostructured ceramic composite coatings prepared by plasma spraying10.1016/j.jallcom.2012.07.032 ↗
38. Adhesion characteristics of zirconia-alumina composite coatings by gas tunnel type plasma spraying10.1016/j.vacuum.2003.12.105 ↗
39. Development of composite thermal barrier coatings with anisotropic microstructure10.1016/S0042-207X(00)00269-4 ↗
40. Microstructural stability of zirconia-alumina composite coatings during hot corrosion test at 1050°C10.1016/j.jallcom.2010.06.110 ↗
41. Process map for plasma sprayed aluminum oxide-carbon nanotube nanocomposite coatings10.1016/j.surfcoat.2008.03.024 ↗
42. Effect of carbon nanotube and aluminum oxide addition on plasma-sprayed hydroxyapatite coating's mechanical properties and biocompatibility10.1016/j.msec.2009.05.001 ↗
43. Wear behavior of plasma-sprayed carbon nanotube-reinforced aluminum oxide coating in marine and high-temperature environments10.1007/s11666-011-9669-2 ↗
44. In-situ formed γ-Al2O3 nanocrystals repaired and toughened Al2O3 coating prepared by plasma spraying10.1016/j.surfcoat.2011.12.014 ↗
45. The effect of thermal aging on the thermal conductivity of plasma sprayed fully stabilized zirconia
46. Thermal transport properties of thermally sprayed coatings10.1179/imr.1992.37.1.271 ↗
47. Morphology and thermal conductivity of yttria-stabilized zirconia coatings10.1016/j.actamat.2006.06.028 ↗
48. Effect of carbon nanotubes on electrical and mechanical properties of multiwalled carbon nanotubes/epoxy coatings10.1007/s11998-015-9723-y ↗
49. Characterization of thermal barrier coatings with a gradient in porosity10.1016/j.surfcoat.2004.07.094 ↗
50. Laser sealing of zirconia–yttria–alumina plasma sprayed coating10.1016/j.jksues.2011.10.004 ↗
51. Pulsed laser processing of plasma sprayed thermal barrier coatings10.1016/S0924-0136(96)02418-1 ↗
52. The effect of coating thickness on corrosion resistance of hydroxyapatite coated Ti6Al4V and 316L SS implants10.1007/s11665-009-9559-7 ↗
53. Effect of microarc oxidation time on electrochemical behaviors of coated bio-compatible magnesium alloy10.1016/j.matpr.2014.09.014 ↗
54. Impedance spectroscopy theory
55. An electrical model circuit that reproduces the behaviour of conducting polymer electrodes in electrolyte solutions10.1016/0022-0728(92)80533-A ↗
56. Electrochemical impedance for degraded coated steel having pores10.5006/1.3585208 ↗
57. Discussion on the relationship of break-point frequencies to delamination10.5006/1.3585210 ↗
58. AC-impedance measurements on corroded porous aluminum oxide films10.1149/1.2108756 ↗
59. The sealing of porous anodic oxide films on aluminium10.1016/0013-4686(62)87009-1 ↗
60. Study of solid electrolyte polarization by a complex admittance method10.1016/0038-1098(69)90484-0 ↗
61. Microstructural, mechanical properties and corrosion behavior of plasma sprayed NiCrAlY / nano-YSZ duplex coating on Mg-1.2Ca-3Zn alloy10.1016/j.ceramint.2015.08.025 ↗
62. Evaluation of thickness, porosity and pore shape of plasma sprayed TBC by electrochemical impedance spectroscopy10.1016/j.surfcoat.2004.06.019 ↗
63. Synthesis of aluminum oxide coating with carbon nanotube reinforcement produced by chemical vapor deposition for improved fracture and wear resistance10.1016/j.carbon.2009.08.046 ↗
64. Electrochemical corrosion behavior of plasma sprayed Al2O3−13%TiO2 coatings in aqueous hydrochloric acid solution10.1002/maco.200905335 ↗
65. Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying10.1016/j.jmbbm.2011.11.002 ↗
66. Evaluation of plasma sprayed YSZ thermal barrier coatings with the CMAS deposits infiltration using impedance spectroscopy10.1016/j.pnsc.2011.12.007 ↗
67. Effect of microarc oxidation time on electrochemical behaviors of coated bio-compatible magnesium alloy10.1016/j.matpr.2014.09.014 ↗