Preparation and characterization of barium titanate nanofibers by electrospinning

Abstract PVP–BaTiO 3 composite nanofibers were successfully prepared by electrospinning and pure BaTiO 3 fibers were produced after calcination at 1000 °C. A homogeneous viscous solution of barium acetate + titanium acetate/titanium isopropoxide in poly vinyl pyrrolidone (PVP) was prepared by varying PVP concentration in the range of 8–12%. The above sols were electrospun at 9 kV DC by maintaining tip to collector distance (TCD) of 7 cm. The electrospun fibers were calcined at 1000 °C for 2 h. Thermo gravimetric analysis (TGA) of the fibers indicates the complete decomposition of organics below 700 °C with 45% weight loss. Scanning electron microscopy (SEM) study shows the fibers cylindrical, smooth with diameters in the range of 50–400 nm and the aspect ratio >1000. The average diameter of the fibers increases with the increase in PVP concentration. The calcined BaTiO 3 nanofibers were found to be coarse, brittle and diameter reduced by 12%. FT-IR study confirms the formation of metal oxide bond at higher temperature.