Static and dynamic mechanical properties of high early strength alkali activated slag concrete
Source abstract
Abstract
Abstract In this study, high early strength alkali activated slag concrete (AASC) was prepared successfully. The compressive and flexural strength with 3 h of water curing reached 39.2 MPa and 3.26 MPa, respectively. A 100 mm diameter split Hopkinson pressure bar (SHPB) system improved by the pulse shaper technique was used to conduct the impact compression test on AASC. The stress–strain curves under different average strain rates were drawn. Based on this, the dynamical compressive mechanical properties of AASC were investigated. The results show that AASC at 3 h of curing possesses excellent dynamic performances including high dynamic compressive strength, good impact toughness and strong ability of deformation. Like ordinary Portland cement concrete (OPCC), AASC belongs to rate-sensitive materials. The dynamic increase factor (DIF), max strain, peak toughness and specific energy absorption (SEA) increase with average strain rate in AASC. Some differences between OPCC and AASC are also observed. As compared to OPCC, AASC has lower DIF, higher deformability and better impact toughness. These differences may be due to the less compact microstructure caused by insufficient curing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
2. Systematic study on the basic characteristics of alkali-activated slag-fly ash cementitious material system10.1016/j.conbuildmat.2011.09.021 ↗
3. Alkali-activated binders: a review: part 1. historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
4. Performance of an alkali-activated slag concrete reinforced with steel fibers10.1016/j.conbuildmat.2007.10.027 ↗
5. Effect of PbII and Cr VI on the hydration of slag-alkaline cement and the immobilization of these heavy metalions10.1680/adcr.1999.11.3.111 ↗
6. Alkali-activated blast furnace slag-based nanomaterial as a novel catalyst for synthesis of hydrogen fuel
7. High-resolution x-ray diffraction and fluorescence microscopy characterization of alkali-activated slag-metakaolin binders10.1111/jace.12247 ↗
8. Study on new alkali slag fast-repaired concrete for airport pavement
9. Development and performance evaluation of very high early strength geopolymer for rapid road repair
10. Ground granulated blast furnace slag used for cement and concrete, GB/T18046-2008 China, 2008.
11. Test method for activity of industrial waste slag used as addition to cement, GB/T 12957-2005 China, 2005.
12. Effect of slag characteristics on performance of cement inorganic polymer
13. Alkali-activated cements opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
14. Huang · 2002 · 132
15. Research progress on alkali-activate binders and concrete
16. Study and application on high-performance rapid repair concrete
17. Response surface experiment research on the early performance of alkali-activated slag
18. Mitigation of autogenous shrinkage in alkali activated slag mortars by internal curing10.1617/s11527-012-9978-z ↗
19. Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes10.1016/j.cemconres.2006.11.021 ↗
20. Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar10.1111/j.1151-2916.1994.tb06987.x ↗
21. Thickness effect of pulse shaper on dynamic stress equilibrium in the rubber specimen
22. Wang · 2005
23. Dynamic compressive behavior of ceramic fiber reinforced concrete under impact load10.1016/j.conbuildmat.2013.04.008 ↗
24. Influence of hydrothermal curing on strength and microstructure of sulfoaluminate cement concrete
25. Mechanical properties of early-strengthened polystyrene concrete under impact load
26. Experimental study on the polyurethane concrete used for rapid repair of highway pavement
27. A study of concrete early mechanical properties
28. Dynamic behavior of concrete at high strain rates and pressures: experimental characterization10.1016/S0734-743X(01)00020-3 ↗
29. Yu · 2001
30. SHPB test on silicate-quartz schist and sand stone
31. Research on the dynamic compressive test of highly fluidized geopolymer concrete10.1016/j.conbuildmat.2013.06.035 ↗
32. Crack band theory for fracture of concrete
33. About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test10.1016/S0020-7683(02)00526-7 ↗
34. Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading10.1016/j.msea.2008.11.063 ↗
35. A study of the relationships between time, strength, deformation and fracture of plain concrete10.1680/macr.1972.24.81.197 ↗
36. Structural and elastic properties of the main species present in the cement paste10.1016/j.actamat.2008.12.007 ↗
37. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
38. Constitutive relation of at medium strain rate
39. Impact mechanical properties of slag and fly ash-based geopolymer concrete
40. Experimental study on mechanical properties of different ages concrete under static and dynamic load10.3901/JME.2013.08.143 ↗
41. Effect of binder content on the performance of alkali-activated slag concretes10.1016/j.cemconres.2010.08.017 ↗
42. Drying shrinkage of heat-cured fly ash-based geopolymer concrete10.5539/mas.v3n12p14 ↗
43. Effect of concentration of alkaline liquid and curing time on strength and water absorption of geopolymer concrete
44. Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar10.1007/BF02411056 ↗
45. Comparative study on the toughness evaluation index of carbon fiber reinforced geopolymer concrete
46. Mechanism of high energy absorption by foamed materials-foamed rigid polyurethane and foamed glass10.1007/BF00540457 ↗
47. Microcracking and strength development of alkali activated slag concrete10.1016/S0958-9465(01)00003-8 ↗