Wear behaviors of TiN/TiCN/DLC composite coatings in different environments
Source abstract
Abstract
Abstract Diamond like carbon (DLC) coatings have high wear resistance and low coefficient of friction and its features are being tried to be further developed. We deposited TiN/TiCN/DLC composite coatings on inconel substrates with closed field unbalanced magnetron sputtering system to improve the features of the conventional DLC coatings. Structural, chemical and bond types of the coating were obtained with the XRD, SEM, EDS and XPS analyses. Wear behaviors of the coatings were determined in atmosphere, distillated water and commercial oil conditions under low (2 N) and high (10 N) constant load values with using pin-on-disc tribo-test system. The wear results demonstrated that using the TiN/TiCN layers with the DLC coatings increased the load carrying capacity, decreased the CoF, and wear rates at the high load values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties10.1016/j.diamond.2009.01.029 ↗
2. Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatments10.1016/0257-8972(94)02375-1 ↗
3. Wear and corrosion properties of diamond like carbon (DLC) coating on stainless steel, CoCrMo and Ti6Al4V substrates10.1016/j.surfcoat.2015.03.031 ↗
4. DLC coating roughness as a function of film thickness10.1016/j.surfcoat.2005.05.030 ↗
5. K. Holmberg, H. Ronkainen, A. Laukkanen, K. Wallin, J. Koskinen, Tribological analysis of TiN and DLC coated contacts by 3D FEM stress modeling and fracture toughness determination, in: VTT Symp. (Valtion Tek. Tutkimuskeskus), 2006, pp. 311–328. 〈http://dx.doi.org/10.1016/j.wear.2006.12.084〉.10.1016/j.wear.2006.12.084 ↗
6. The effect of tin and CrN interlayers on the tribological behavior of DLC coatings10.1016/j.wear.2014.05.008 ↗
7. Effects of TiCN interlayer on bonding characteristics and mechanical properties of DLC-coated Ti-6Al-4V ELI alloy10.1016/j.ijrmhm.2015.04.028 ↗
8. Friction and wear characteristics of TiN, TiCN and diamond-like carbon films10.1016/S0257-8972(96)02905-2 ↗
9. DLC multilayer coatings for wear protection10.1016/0925-9635(94)00256-8 ↗
10. Behaviour of boundary lubricating additives on DLC coatings10.1016/j.wear.2008.04.051 ↗
11. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
12. Raman and XPS studies of DLC films prepared by a magnetron sputter-type negative ion source10.1016/j.surfcoat.2004.08.073 ↗
13. DLC thin films characterized by AES, XPS and EELS10.1016/S0169-4332(02)00891-7 ↗
14. Direct evaluation of the sp3 content in diamond-like-carbon films by XPS10.1016/S0169-4332(98)00319-5 ↗
15. Hardness effect of DLC on tribological properties for sliding bearing under boundary lubrication condition in additive-free mineral base oil10.1016/j.triboint.2013.01.016 ↗
16. Improvement of tribological characteristics under water lubrication of DLC-coatings by surface polishing10.1016/j.wear.2009.04.009 ↗
17. Tribological characterization of diamond-like carbon (DLC) coatings sliding against DLC coatings10.1016/S0925-9635(03)00165-1 ↗
18. Friction and wear of Cr-doped DLC films under different lubrication conditions10.1016/j.vacuum.2013.01.010 ↗