Improving the cycling stability of LiCoO2 at 4.5V through co-modification by Mg doping and zirconium oxyfluoride coating
Source abstract
Abstract
Abstract The co-modification by Mg doping and zirconium oxyfluoride (ZrOxFy) coating is employed to improve the cycling stability of LiCoO2 in the voltage range of 3.0–4.5 V. SEM, TEM images and EDS mappings of the modified sample confirm that there is a compact ZrOxFy coating layer on the surface of the cathode particles and the doping element (Mg) distributes uniformly in the modified sample. Electrochemical tests demonstrate that the co-modified sample exhibits obviously enhanced cycling stability in the voltage range of 3.0–4.5 V, which maintains 91.2% of its initial capacity after 100 cycles at 1 C rate. That is much more than 64.4% for the pristine sample. Moreover, EIS, XRD and Co dissolution tests of the cycled electrodes reveal that Mg doping stabilizes the crystal structure of LiCoO2 and ZrOxFy coating alleviates unwanted interfacial side reactions between the cathode and electrolyte, thereby suppressing Co dissolution and the growth of impedance during prolonged cycling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. LixCoO2 (0<x<1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
4. Li ion battery materials with core–shell nanostructures10.1039/c1nr10550g ↗
5. Staging phase transitions in LixCoO210.1149/1.1519850 ↗
6. Development of lithium-ion batteries with a LiCoO2 cathode toward high capacity by elevating charging potential10.1149/1.2916685 ↗
7. Higher, stronger, better… a review of 5V cathode materials for advanced lithium-ion batteries10.1002/aenm.201200068 ↗
8. Effect of Mg doping and MgO-surface modification on the cycling stability of LiCoO2 electrodes10.1016/S1388-2481(01)00192-8 ↗
9. Effects of Al doping on the microstructure of LiCoO2 cathode materials10.1016/S0167-2738(00)00828-6 ↗
10. Performance of LiM0.05Co0.95O2 cathode materials in lithium rechargeable cells when cycled up to 4.5V10.1021/cm048734o ↗
11. Synthesis, characterization, and thermal stability of LiCo1−z[MnMg]z/2O210.1149/1.3457425 ↗
12. Enhanced electrochemical performance of Mg-doped LiCoO2 synthesized by a polymer-pyrolysis method10.1016/j.ceramint.2014.03.170 ↗
13. LiCoO2 cathode material that does not show a phase transition from hexagonal to monoclinic phase10.1149/1.1397772 ↗
14. Effect of a ZrO2 coating on the structure and electrochemistry of LixCoO2 when cycled to 4.5V10.1149/1.1503202 ↗
15. Comparative study of LiCoO2 surface modified with different oxides10.1016/j.jpowsour.2007.06.129 ↗
16. Metal-phosphate coating on LiCoO2 cathodes with high cutoff voltages10.1016/j.materresbull.2006.10.022 ↗
17. M3(PO4)2-nanoparticle-coated LiCoO2 vs LiCo0.96M0.04O2 (M=Mg and Zn) on electrochemical and storage characteristics10.1149/1.2827993 ↗
18. Improved high-voltage performance of FePO4-coated LiCoO2 by microwave-assisted hydrothermal method10.1016/j.elecom.2014.03.017 ↗
19. Effect of AlF3 coating amount on high voltage cycling performance of LiCoO210.1016/j.electacta.2007.08.032 ↗
20. Improvement of structural and electrochemical properties of commercial LiCoO2 by coating with LaF310.1016/j.electacta.2011.03.017 ↗
21. Interface characterization of MgF2-coated LiCoO2 thin films10.1016/j.ssi.2012.08.003 ↗
22. Synthesis and characterization of Mg substituted LiCoO210.1149/1.3424909 ↗
23. Studies on bare and Mg-doped LiCoO2 as a cathode material for lithium ion batteries10.1016/j.electacta.2013.10.192 ↗
24. Improved electrochemical performances of LiM0.05Co0.95O1.95F0.05 (M=Mg, Al, Zr) at high voltage10.1016/j.electacta.2012.02.057 ↗
25. AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery10.1007/s100080050173 ↗
26. Investigation of solid electrolyte interfacial layer development during continuous cycling using ac impedance spectra and micro-structural analysis10.1016/j.jpowsour.2008.11.048 ↗
27. Improved electrochemical performance of NH4AlF4-coated LiCoO2 cycled over 4.5V10.1149/1.3430642 ↗