Improved energy storage density in 0.475BNT–0.525BCTZ with MgO addition
Source abstract
Abstract
Abstract 0.475BNT–0.525BCTZ– x wt% MgO ceramics were prepared through a solid–solid state route and their phase structure, microstructure, dielectric and energy storage properties were investigated with the focus on optimizing properties for capacitor applications. The secondary phases of MgO and Mg 2 TiO 4 were observed when the content of MgO is higher than a critical amount (5–7 wt%). Diffuse phase transition was observed due to the large differences of ion valences and sizes in B-site ions and the presence of secondary phases. The dielectric breakdown strength of these ceramics were significantly enhanced along with the addition of MgO, leading to a significant improvement of discharge energy density. The sample with x =5 shows a high dielectric breakdown strength of 15.67 kV/mm and the highest maximum discharge energy density of 1.04 J/cm 3 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Core-satellite BaTiO3 @SrTiO3 assemblies for a local compositionally graded relaxor ferroelectric capacitor with enhanced energy storage density and high energy efficiency10.1039/C4TC02291B ↗
2. High energy-storage properties of [(Bi1/2Na1/2)0.94Ba0.06]La(1-x)Zrx-TiO3 lead-free anti-ferroelectric ceramics10.1016/j.ceramint.2013.08.099 ↗
3. A dielectric polymer with high electric energy density and fast discharge speed10.1126/science.1127798 ↗
4. Largely enhanced energy density in flexible P(VDF-TrFE) nanocomposites by surface modified electrospun BaSrTiO3 fibers10.1039/C2TA00948J ↗
5. Core-shell structured high-k polymer nanocomposites for energy storage and dielectric applications10.1002/adma.201401310 ↗
6. Influence of crystallization temperature on ferroelectric properties of Na0.9K0.1NbO3 glass-ceramics10.1111/jace.13671 ↗
7. High-energy storage performance of (Pb0.87Ba0.1La0.02)(Zr0.68Sn0.24Ti0.08)O3 antiferroelectric ceramics fabricated by the hot-press sintering method10.1111/jace.13412 ↗
8. Temperature-dependent stability of energy storage properties of Pb0.97La0.02(Zr0.58Sn0.335Ti0.085)O3 antiferroelectric ceramics for pulse power capacitors10.1063/1.4923373 ↗
9. Enhanced energy storage density of Ba0.4Sr0.6TiO3-MgO composite prepared by spark plasma sintering10.1016/j.jeurceramsoc.2014.11.022 ↗
10. Nonlinear dielectric thin films for high-power electric storage with energy density comparable with electrochemical supercapacitors10.1109/TUFFC.2011.2039 ↗
11. Giant piezoelectricity in potassium-sodium niobate lead-free ceramics10.1021/ja500076h ↗
12. Potassium-sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries10.1021/cr5006809 ↗
13. Large d33 in (K,Na)(Nb,Ta,Sb)O3-(Bi,Na,K)ZrO3 lead free ceramics10.1039/c3ta15075e ↗
14. Preparation and investigation on properties of BST-based ceramic with high-energy storage density10.1142/S2010135X13500057 ↗
15. Ba0.4Sr0.6TiO3/MgO composite with enhanced energy storage density and low dielectric loss for solid-state pulse-forming line10.1504/IJCAT.2010.034740 ↗
16. Improved energy storage density in barium strontium titanate by addition of BaO-SiO2-B2O3 glass10.1111/j.1551-2916.2009.03109.x ↗
17. Optimization of energy storage density and efficiency in BaxSr1−xTiO3 (x≤0.4) paraelectric ceramics10.1016/j.ceramint.2015.02.156 ↗
18. Optimization of energy storage density in ceramic capacitors10.1088/0022-3727/29/1/037 ↗
19. Decoding the fingerprint of ferroelectric loops: comprehension of the material properties and structures10.1111/jace.12773 ↗
20. Large Electric-field-induced strain in Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3 solid solution single crystals10.1063/1.3046791 ↗
21. Ferroelectric and piezoelectric properties of (Na, K)0.5Bi0.5-TiO3 lead free ceramics10.1088/0022-3727/39/10/042 ↗
22. Relaxor ferroelectrics10.1080/00150198708016945 ↗
23. Recent progress in relaxor ferroelectrics with perovskite structure10.1007/s10853-005-5915-7 ↗
24. Polar nanoregions and dielectric properties in high-strain lead-free 0.93(Bi1/2Na1/2)TiO3−0.07BaTiO3 piezoelectric single crystals
25. On the phase identity and its thermal evolution of lead free (Bi1/2Na1/2)TiO3−6mol% BaTiO310.1063/1.3645054 ↗
26. Dielectric and temperature stable energy storage properties of 0.88BaTiO3−0.12Bi(Mg1/2Ti1/2)O3 bulk ceramics10.1016/j.jallcom.2015.02.225 ↗
27. Relaxor behavior and piezoelectric properties of Bi(Mg0.5Ti0.5)O3-modified Bi0.5Na0.5TiO3 lead-free ceramics10.1016/j.ceramint.2015.04.150 ↗
28. Low-losses, highly tunable Ba0.6Sr0.4TiO3∕MgO composite10.1063/1.2837621 ↗
29. Enhanced energy-storage performance and dielectric characterization of 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 modified by CaZrO310.1016/j.jallcom.2015.12.194 ↗
30. Synthesis and characterizations of BNT-BT and BNT-BT-KNN ceramics for actuator and energy storage applications10.1016/j.ceramint.2014.12.136 ↗
31. Enhanced energy-storage properties of (1-x)[(1−y) (Bi0.5Na0.5)TiO3-y(Bi0.5K0.5)TiO3]-x(K0.5Na0.5)NbO3 lead-free ceramics10.1016/j.ssc.2014.12.004 ↗