Tribological behavior of epoxy composites filled with nanodiamond and Ti3AlC2TiC particles: A comparative study
Source abstract
Abstract
Abstract The aim of this study is to compare the wear behavior of epoxy composites filled with Ti3AlC2 TiC and nanodiamond particles. Results indicated that the properties of epoxy/Ti3AlC2 TiC composites were better than those of epoxy/nanodiamond composites. The surface hardness of epoxy-0.75 wt% Ti3AlC2 TiC composites was about 20.85% higher than that of epoxy-0.75 wt% nanodiamond composites. In addition, the wear rate of composites containing 0.75 wt% of Ti3AlC2 TiC and nanodiamond at the normal loads of 5 was respectively about 73.58 and 301.98 × 10−6 mm3/Nm. Moreover, under both normal loads of 5 and 10 N, the Ti3AlC2 TiC particles had better performance in improving wear behavior of samples, compared to nanodiamond particles. SEM images of fracture and worn surfaces of samples were utilized for understanding the dominant wear mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Tribology and Wear Analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Wear and friction of epoxy based nanocomposites with silica nanoparticles and wax-containing microcapsules10.1016/j.compositesa.2018.01.033 ↗
2. Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds10.1016/j.matdes.2015.08.059 ↗
3. Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles10.1016/j.compscitech.2011.12.015 ↗
4. Epoxy nanocomposites with high mechanical and tribological performance10.1016/S0266-3538(03)00115-5 ↗
5. Tribological and mechanical behaviour of epoxy/nanoclay composites10.1007/s11249-013-0174-2 ↗
6. Enhancing the thermal and mechanical properties of epoxy resins by addition of a hyperbranched aromatic polyamide grown on microcrystalline cellulose fibers10.1039/c3ra45732j ↗
7. Polymeric nanocomposites for tribological applications10.1002/mame.200600416 ↗
8. Friedrich · 2011
9. Tribological properties of epoxy nanocomposites: I. Enhancement of the wear resistance by nano-TiO2 particles10.1016/j.wear.2004.09.005 ↗
10. Friction and wear of high electrical conductive carbon nanotube buckypaper/epoxy composites10.1016/j.compscitech.2015.03.012 ↗
11. Some insights into effects of nanoparticles on sliding wear performance of epoxy nanocomposites10.1016/j.wear.2013.04.037 ↗
12. Wear behavior of epoxy matrix composites filled with uniform sized sub-micron spherical silica particles10.1016/S0043-1648(03)00220-5 ↗
13. Tribological studies of epoxy composites with solid and liquid fillers10.1016/j.triboint.2016.09.010 ↗
14. Mechanical properties and tribological performance of epoxy/Al2O3 nanocomposite10.1016/j.ceramint.2017.10.068 ↗
15. Effect of graphene and ionic liquid additives on the tribological performance of epoxy resin10.1007/s11249-014-0392-2 ↗
16. Effects of functionalised reduced graphene oxide on frictional and wear properties of epoxy resin10.1179/1433075X14Y.0000000220 ↗
17. Friction and wear of epoxy/TiO2 nanocomposites: influence of additional short carbon fibers, Aramid and PTFE particles10.1016/j.compscitech.2005.02.022 ↗
18. Tribological performance of carbon nanotube–graphene oxide hybrid/epoxy composites10.1016/j.compositesb.2013.09.050 ↗
19. Unique synergistic effects of graphene oxide and carbon nanotube hybrids on the tribological properties of polyimide nanocomposites10.1016/j.triboint.2017.09.006 ↗
20. Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites10.1016/j.compositesb.2017.03.047 ↗
21. Epoxy-graphene-MoS2 composites with improved tribological behavior under dry sliding contact10.1016/j.triboint.2018.09.016 ↗
22. A novel approach to minimize dry sliding friction and wear behavior of epoxy by infusing fullerene C70 and multiwalled carbon nanotubes10.1016/j.triboint.2018.01.028 ↗
23. Effects of graphene oxide sheets-zirconia spheres nanohybrids on mechanical, thermal and tribological performances of epoxy composites10.1016/j.ceramint.2018.07.010 ↗
24. Enhanced tribological properties of polymer composite coating containing graphene at room and elevated temperatures10.3390/coatings8030091 ↗
25. Improvement of dry sliding tribological properties of polyamide 6 using diamond nanoparticles10.1016/j.triboint.2017.06.003 ↗
26. Synthesis and tribological behavior of novel wear-resistant PEEK–Ti3SiC2 composites10.1177/1350650116648868 ↗
27. Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites10.1016/j.carbon.2015.07.026 ↗
28. Improved mechanical properties of epoxy reinforced by low content nanodiamond powder10.1016/j.msea.2011.06.053 ↗
29. Tribological and mechanical properties of low content nanodiamond/epoxy nanocomposites10.1016/j.compositesb.2012.01.022 ↗
30. Tribological properties of nanodiamond-epoxy composites10.1007/s11249-012-9978-8 ↗
31. Mechanical properties of epoxy composites with high contents of nanodiamond10.1016/j.compscitech.2011.01.016 ↗
32. Barsoum · 2013
33. The Mn+1AXn phases: materials science and thin-film processing10.1016/j.tsf.2009.07.184 ↗
34. Direct synthesis of Ti3AlC2-Al2O3 nanocomposite by mechanical alloying10.1016/j.jallcom.2018.01.039 ↗
35. The phase and morphological evolution of Ti3SiC2 MAX phase powder after HF treatment10.1016/j.ceramint.2018.06.278 ↗
36. Effect of liquid reaction on the synthesis of Ti3SiC2 powder10.1016/j.ceramint.2006.08.010 ↗
37. Mechanically activated combustion synthesis of Ti3AlC2/Al2O3 nanocomposite from TiO2/Al/C powder mixtures
38. Synthesis of Ti3AlC2 ceramic by high-energy ball milling of elemental powders of Ti, Al and C10.1016/j.jmatprotec.2008.02.056 ↗
39. Tribological and corrosion behavior of flame sprayed Al–10 wt% Ti3SiC2 composite coating on carbon steel10.1016/j.surfcoat.2018.10.087 ↗
40. Friction and wear behavior of polytetrafluoroethene composites filled with Ti3SiC210.1016/j.matdes.2014.04.069 ↗
41. Tribological behavior of novel Ti3SiC2 (natural nanolaminates)-reinforced epoxy composites during dry sliding10.1080/10402004.2014.996308 ↗
42. Polyaryletherketone polymer nanocomposite engineered with nanolaminated Ti3SiC2 ceramic fillers10.1016/j.matdes.2014.06.034 ↗
43. Synthesis and tribological behavior of novel UHMWPE- Ti3SiC2 composites10.1002/pc.23925 ↗
44. MAX phase ternary carbide derived 2-D ceramic nanostructures [CDCN] as chemically interactive functional fillers for damage tolerant epoxy polymer nanocomposites10.1039/C4RA16518G ↗
45. Ke-Pi Chen Electrical, dielectric and mechanical properties of a novel Ti3AlC2/epoxy resin conductive composites10.1016/j.matlet.2013.07.117 ↗
46. Nanodiamond–polymer composites10.1016/j.diamond.2015.07.003 ↗
47. Fracture toughness and failure mechanism of graphene based epoxy composites10.1016/j.compscitech.2014.03.014 ↗
48. On the sliding wear of nanoparticle filled polyamide 66 composites10.1016/j.compscitech.2005.02.021 ↗
49. Formation and function mechanisms of nanostructured tribofilms of epoxy-based hybrid nanocomposites10.1016/j.wear.2015.08.025 ↗
50. Tribological properties of epoxy nanocomposites10.1016/j.wear.2006.08.002 ↗