The effects of sintering temperature on phase and pore evolution in porcelain tiles
Source abstract
Abstract
Abstract The phase and pore evolution of porcelain tiling against sintering temperature are investigated in this study. A standard porcelain tile composition was sintered at nine different temperatures between 1150 and 1230 °C. The amount of the amorphous phase and the degree of densification show good compatibility with each other; up to 1200 °C they increase gradually, although at this temperature retardation is observed for both properties. Pore size increases up to 1170 °C, after which the amorphous phase becomes the major phase of the tile and pore size begins to reduce below 0.4 µm through the elimination of interconnected porosity. Simultaneous evaluation of scanning electron microscopy (SEM), X-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) analyses enables us to obtain the sintering behavior of the porcelain tile.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 〈http://www.acimac.it/comunicatistampa.asp?Id=288&idd=289&idscheda=1013〉 (last reach date: 06.06.2016).
2. The role of firing temperature, firing time and quartz grain size on phase-formation, thermal dilatation and water absorption in sanitary-ware vitreous bodies10.1016/j.jeurceramsoc.2011.02.006 ↗
3. Porcelain tile microstructure: implications for polished tile properties10.1016/j.jeurceramsoc.2005.06.002 ↗
4. Enhancing the mechanical properties of porcelain stoneware tiles: a microstructural approach10.1016/S0955-2219(00)00266-1 ↗
5. Evolution with temperature of crystalline and amorphous phases in porcelain stoneware10.1111/j.1551-2916.2008.02862.x ↗
6. The vitreous phase of porcelain stoneware: composition, evolution during sintering and physical properties10.1016/j.jnoncrysol.2011.05.020 ↗
7. Shrinkage prediction during non-isothermal sintering in the presence liquid phase: new kinetic model, Part I10.1016/j.tca.2013.11.004 ↗
8. Effect of microstructure on mechanical properties of porcelain stoneware10.1016/j.jeurceramsoc.2010.07.015 ↗
9. Evaluation of a plastic clay from the State of Rio de Janeiro as a component of porcelain tile body
10. Properties related phase evolution in porcelain ceramics10.1016/j.jeurceramsoc.2007.02.096 ↗
11. Influence of mixing/milling on sintering and technological properties of anorthite based porcelainised stoneware10.1016/j.ceramint.2005.03.010 ↗
12. Characterization of porous ceramics by image analysis and mercury porosimetry
13. Predicting porosity content in triaxial porcelain bodies as a function of raw materials content10.1007/s10853-007-2188-3 ↗
14. Investigation of porosity of ceramic tiles by means of image analysis method
15. Techniques used to determine porosity
16. Rahaman · 2003
17. Kinetic model for isothermal sintering of low porosity floor tiles10.1016/0169-1317(93)90040-8 ↗
18. Characterization of diopside-based glass-ceramic porcelain tile glazes containing borax solid wastes
19. Pore Structure Characterization of Ceramic Hot Gas Filters
20. J.L. Amorós, M.J. Orts, A. Escardino, A. Blasco, Evolution of pore-size distribution during the firing of stoneware floor tile, in: IV World Congress on Ceramic Tile Quality, Castellón, pp. 337–340, 1996.
21. Effect of the green porous texture on porcelain tile properties10.1016/j.jeurceramsoc.2006.07.005 ↗