journal article·2013-01

Catalytic combustion of toluene over Fe–Mn mixed oxides supported on cordierite

W.J. Ma, Q Huang, Y. Xu, Y.W. Chen, S.M. Zhu, S.B. Shen

Ceramics International· Volume 39· Issue 1
Publisher page

Abstract

Abstract The catalytic combustion of toluene over Fe–Mn mixed oxides supported on cordierite was investigated. The catalysts were synthesized by the impregnation method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET specific surface area measurement. The effects of the mole ratio of Fe to Mn, the loading of Fe–Mn mixed oxides on the catalyst support and the calcination temperature were all investigated. The results indicate that Fe–Mn/cordierite catalysts with a 4 mol ratio of Fe to Mn, used with 10 wt% loading, and calcined at 500 °C showed the highest catalytic activities as measured by the oxidation of toluene. Compared to unsupported powder catalysts of Fe–Mn mixed oxides, the Fe–Mn/cordierite catalyst showed higher activity for the catalytic combustion of toluene with less active component.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Catalytic Activity of Supported Platinum and Metal Oxide Catalysts for Toluene Oxidation10.1007/s11244-009-9182-8 ↗
2. Catalytic combustion of VOCs on non-noble metal catalysts10.1016/j.cattod.2009.03.007 ↗
3. Catalytic activity of nanometer La1−xSrxCoO3 (x=0, 0.2) perovskites towards VOCs combustion10.1016/j.catcom.2007.05.004 ↗
4. Comparative Studies on Porous Material-Supported Pd Catalysts for Catalytic Oxidation of Benzene, Toluene and Ethyl Acetate10.1021/ie900412c ↗
5. Catalytic oxidation of toluene on Mn-Containing mixed oxides prepared in reverse microemulsions
6. Complete catalytic oxidation of volatile organics10.1021/ie00071a001 ↗
7. Characterisation of Mg/Al hydrotalcite with interlayer palladium complex for catalytic oxidation of toluene10.1016/S0926-860X(02)00201-6 ↗
8. Catalytic oxidation of chlorobenzene on supported manganese oxide catalysts10.1016/S0926-3373(00)00193-4 ↗
9. Hydrothermal stabilization by lanthanum of mixed metal oxides and noble metal catalysts for volatile organic compound removal10.1006/jcat.2001.3185 ↗
10. Alumina-supported manganese- and manganese-palladium oxide catalysts for VOCs combustion10.1016/S1566-7367(03)00037-2 ↗
11. Catalytic combustion of solvent containing air on base metal catalysts10.1016/0920-5861(95)00320-7 ↗
12. Preparation and characterization of SrTi1-x-yZrxMnyO3 solid solution powders in relation to their use in combustion catalysis10.1016/S0926-3373(96)00082-3 ↗
13. Study of SBA-15 supported catalysts for toluene and NO removal: the effect of promoters ( Co, Ni, Mn, Ce)
14. Manganese and iron oxides as combustion catalysts of volatile organic compounds10.1016/j.apcatb.2009.07.010 ↗
15. Catalytic combustion of toluene with a novel mixed Cu-Mn oxides catalyst supported on cordierite10.1252/jcej.09We206 ↗
16. Catalytic combustion of toluene over Mn, Fe and Co-exchanged clinoptilolite support10.1016/j.cej.2009.07.013 ↗
17. Pd/Ce0.9Cu0.1O1.9-Y2O3 catalysts for catalytic combustion of toluene and ethyl acetate10.1016/j.jiec.2009.09.045 ↗
18. Catalytic combustion of toluene over a copper-manganese-silver mixed-oxide catalyst supported on a washcoated ceramic monolith10.1002/ceat.200900151 ↗