Spray drying of nanometric SYSZ powders to obtain plasma sprayable nanostructured granules
Source abstract
Abstract
Abstract This study addresses the correlation between the feedstock agglomerates with their resulting coating microstructure and thermal insulation capability. To this end, the Y2O3 and Sc2O3 codoped in ZrO2 (SYSZ) nanopowders were synthesized by the polymeric sol–gel method, their suspensions were agglomerated into plasma sprayable feedstock by the spray drying method, and finally, the effect of feedstock morphology on the microstructures and thermal insulation capability of APS coatings was investigated. The coating microstructure consisted of semi-molten feedstock agglomerates surrounded by fully molten particles that acted as binders. Solid irregular SYSZ granules yielded coatings with lower porosity and thermal insulation capability than the porous spherical YSZ ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Synthesis of SYSZ nanocrystal via new wet chemical method
2. Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings10.1016/j.surfcoat.2006.06.041 ↗
3. Microstructural characterization studies to relate the properties of thermal spray coatings to feedstock and spray conditions10.1016/S0257-8972(01)01433-5 ↗
4. Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review10.1088/0022-3727/44/9/093001 ↗
5. Influence of slurry parameters on the characteristics of spray-dried granules10.1111/j.1151-2916.1999.tb01990.x ↗
6. Integrity of nanostructured partially stabilized zirconia after plasma spray processing10.1016/S0921-5093(01)01146-7 ↗
7. Fabrication and evaluation of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings10.2174/157341312800620250 ↗
8. Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating10.1016/j.vacuum.2006.01.030 ↗
9. R. Peter, B.Strutt, lt. Kear, R.F. Boland, Method of Manufacturing of Nanostructred feeds, US Patent No. 6,025,034.
10. Production of titanate microspheres by sol–gel and spray-drying10.1023/A:1008612415777 ↗
11. M.R. Loghman-Estarki, M. Hajizadeh-Oghaz, H. Edris, R. Shoja Razavi, Comparative studies on synthesis of nanocrystalline Sc2O3–Y2O3 doped zirconia (SYDZ) and YSZ solid solution via modified and classic Pechini method, Crystal Engineering Communication, 2013, 10.1039/c3ce40288f.10.1039/c3ce40288f ↗
12. Production of meso- and giga-porous zirconia particles—an improved multi-step particle aggregation process Abhinandan Pattanayak, Anuradha Subramanian10.1016/j.powtec.2009.01.023 ↗
13. Masters · 1991 · 347
14. Effect of dispersants on surface chemical properties of nanozirconia suspensions10.1016/S0272-8842(99)00024-3 ↗
15. Novel thermal properties of nanostructured materials
16. Interfacial thermal resistance in nanocrystalline yttria-stabilized zirconia10.1016/S1359-6454(02)00057-5 ↗
17. Correlation between slurry rheology, green density and sintered density of tape cast yttria stabilised zirconia10.1016/S0272-8842(00)00121-8 ↗
18. Direct coagulation casting of YSZ powder suspensions using MgO as coagulating agent10.1016/j.ceramint.2008.08.003 ↗
19. Nano ZrO2–Y2O3 particles processing by heating of ethanol-aques salt solution10.1016/S0272-8842(00)00116-4 ↗
20. ASTM B0212-99, Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall flowmeter funnel
21. ASTM B 213–03, Standard Test Method for Flow Rate of Metal Powders.
22. Synthesis and thermal stability of ZrO2, Re–Sc, Y nanocrystals
23. Spray-drying of ceramics for plasma-spray coating10.1016/S0955-2219(00)00112-6 ↗
24. Preparation and spray drying of Al2O3–TiO2 nanoparticle suspensions to obtain nanostructured coatings by APS10.1016/j.surfcoat.2010.06.002 ↗
25. Fabrication and characterization of spray dried Al2O3–ZrO2–Y2O3 powders treated by calcining and plasma10.1016/j.powtec.2011.06.004 ↗
26. Influence of heat treatment on nanocrystalline zirconia powder and plasma-sprayed thermal barrier coatings10.1016/S1003-6326(10)60640-1 ↗
27. Comparison of thermal shock behaviors between plasma-sprayed nanostructured and conventional zirconia thermal barrier coatings10.1016/S1003-6326(08)60235-6 ↗
28. The influence of powder agglomeration methods on plasma sprayed yttria containing10.1007/BF02652025 ↗
29. Effects of powder morphology, microstructure, and residual stresses on thermal barrier coating thermal shock performance
30. Heat transfer through plasmasprayed thermal barrier coatings in gas turbines: a review of recent work10.1007/s11666-009-9337-y ↗
31. Synthesis and characterization of pure cubic zirconium oxide nanocrystals by decomposition of bis-aqua, tris-acetylacetonato zirconium(IV) nitrate as new precursor complex10.1016/j.ica.2009.05.036 ↗
32. Pure cubic ZrO2 nanoparticles by thermolysis of a new precursor10.1016/j.poly.2009.06.032 ↗
33. Optimization of morphology and particle size of modified sol–gel synthesized YSZ nano powder using Taguchi method10.4028/www.scientific.net/JNanoR.21.65 ↗
34. Controllable synthesis of metastable tetragonal zirconia nanocrystals using citric acid assisted sol–gel method10.1016/j.ceramint.2012.09.067 ↗