Adsorbability and spreadability of calcium-magnesium-alumino-silicate (CMAS) on Al-modified 7YSZ thermal barrier coating
Source abstract
Abstract
Abstract A dense α-Al 2 O 3 overlay was in-situ synthesized on 7YSZ TBC to mitigate the CMAS attack. The adsorbability and spreadability of CMAS on as-sprayed and Al-modified TBCs were investigated. The results show that compared to the as-spared TBC, the Al-modified TBC has lower adsorption mass and smaller spreading area. When the Al-modified 7YSZ coating was subjected to CMAS attack, the presence of large amounts of Al 2 O 3 will accelerate the formation of MgAl 2 O 4 spinel and induce the generation of CaAl 2 O 4 spinel apart from gehlenite Ca 2 Al 2 SiO 7 . Therefore, it can be concluded that Al-modified 7YSZ TBC has better CMAS corrosion resistance than as-sprayed TBC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
2. Thermal barrier coatings for enhanced efficiency of gas turbine engines10.1016/j.surfcoat.2006.06.026 ↗
3. Pre-oxidation and TGO growth behaviour of an air-plasma-sprayed thermal barrier coating10.1016/j.surfcoat.2008.01.021 ↗
4. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
5. The effect of silicon on thermal shock performance of aluminide-thermal barrier coatings10.1016/j.corsci.2013.05.025 ↗
6. Microstructure characteristics of EB-PVD YSZ thermal barrier coatings corroded by molten volcanic10.1016/j.surfcoat.2015.12.003 ↗
7. Gas-deposition mechanisms of 7YSZ coating based on plasma spray-physical vapor deposition10.1016/j.jeurceramsoc.2015.10.041 ↗
8. Evaluation of hot corrosion behavior of CSZ, CSZ-micro Al2O3 and CSZ-nano Al2O3 plasma sprayed thermal barrier coatings10.1016/j.ceramint.2013.08.135 ↗
9. Microstructural evolution of plasma sprayed submicron-/nano-zirconia-based thermal barrier coatings10.1016/j.apsusc.2015.12.010 ↗
10. Microstructure and mechanical properties of plasma spraying coatings from YSZ feedstocks comprising nano- and submicron-sized particles10.1016/j.ceramint.2014.11.106 ↗
11. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
12. Jet engine coatings for resisting volcanic ash damage10.1002/adma.201004783 ↗
13. Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits10.1016/j.actamat.2007.08.028 ↗
14. Evaluation of laser-glazed plasma-sprayed thermal barrier coatings under high temperature exposure to molten salts10.1016/j.surfcoat.2005.10.011 ↗
15. Performance of laser-glazed zirconia thermal barrier coatings in cyclic oxidation and corrosion burner rig tests10.1016/0040-6090(82)90020-7 ↗
16. Effect of Al2O3 overlay on hot-corrosion behavior of yttria-stabilized zirconia coating in molten sulfate-vanadate salt10.1016/S0040-6090(03)00670-9 ↗
17. Protectiveness of Pt and Gd2Zr2O7 layers on EB-PVD YSZ thermal barrier coatings against calcium –magnesium–alumina–silicate (CMAS) attack10.1016/j.ceramint.2015.05.128 ↗
18. Modeling the impact, flattening and solidification of a molten droplet on a solid substrate during plasma spraying10.1016/j.apsusc.2014.08.032 ↗
19. Influence of dopant on the thermal properties of two plasma-sprayed zirconia coatings Part I: relationship between powder characteristics and coating properties10.1007/BF02645273 ↗
20. Microstructure and failure mechanism in as-deposited, vacuum plasma-sprayed Ti-6Al-4V alloy10.1361/10599630523773 ↗
21. In situ synthesis of α-alumina layer at top yttrium-stabilized zirconia thermal barrier coatings for oxygen barrier10.1016/j.ceramint.2014.04.118 ↗
22. Research of in situ modified PS-PVD thermal barrier coating against CMAS (CaO-MgO-Al2O3-SiO2) corrosion10.1016/j.ceramint.2015.10.106 ↗
23. Reaction mechanism and insulation property of Al-deposited thermal barrier coating10.1016/j.jmst.2015.06.002 ↗
24. A delamination mechanism for thermal barrier coatings subject to calcium–magnesium–alumino-silicate (CMAS) infiltration10.1016/j.actamat.2004.11.028 ↗
25. Thermochemical interaction of thermal barrier coatings with molten CaO–MgO–Al2O3–SiO2 (CMAS) deposits10.1111/j.1551-2916.2006.01209.x ↗
26. Calcium–magnesium –alumino-silicate (CMAS) degradation of EB-PVD thermal barrier coatings: characterization of CMAS damage on ex-service high pressure blade TBCs10.1016/j.surfcoat.2012.07.074 ↗
27. In situ synthesis a-alumina layer on thermal barrier coating for protection against CMAS (CaO-MgO-Al2O3-SiO2) corrosion10.1016/j.surfcoat.2014.11.064 ↗
28. Microstructure and thermo-physical properties of yttria stabilized zirconia coatings with CMAS deposits10.1016/j.jeurceramsoc.2011.04.006 ↗
29. Step-by-step investigation of degradation mechanisms induced by CMAS attack on YSZ materials for TBC applications10.1016/j.surfcoat.2013.08.055 ↗
30. Shape memory behaviour in partially stabilized zirconia ceramics10.1038/322234a0 ↗
31. A re-evaluation of the liquid phases in the CaO–Al2O3 and MgO–Al2O3 systems10.1016/j.calphad.2004.09.001 ↗
32. In situ elastic modulus evaluation of Al2O3–MgO refractory castables10.1016/j.ceramint.2013.07.066 ↗
33. Effect of slag composition on the crystallization of synthetic CaO–SiO2–Al2O3–MgO slags: Part I—Crystallization behavior10.1016/j.jnoncrysol.2015.12.011 ↗
34. Experimental determination of the liquidus in the high basicity region in the Al2O3(30 mass%)-CaO-MgO-SiO2 system10.1016/j.calphad.2010.11.004 ↗
35. Mono-disperse spherical Cu–Zn powder fabricated via the low wettability of liquid/solid interface10.1016/j.apsusc.2015.09.035 ↗
36. On the stability of bubbles trapped at a solid–liquid interface: a thermodynamical approach10.1016/j.susc.2009.07.034 ↗