TiO2 nanotube coating on stainless steel 304 for biomedical applications
Source abstract
Abstract
The present study describes the anodic growth of TiO2 nanotube thin layer on stainless steel 304 in ethylene glycol/water/ammonium fluoride electrolyte. In this regard, pure titanium was coated on stainless steel 304 substrates by a physical vapor deposition magnetron sputtering (PVDMS) technique. The adhesion strength of the coating to the substrate was investigated. TiO2 nanotubes were generated on the top of the Ti coated substrates by means of anodization technique at a 25 V potential and times of 20, 40, and 60 min in an ammonium fluoride electrolyte solution. The anodized Ti-coated samples were heat-treated at 280 1C, 430 1C and 620 1 Ci n aN 2 gas furnace to attain diverse phases. The mechanical properties of TiO2 nanotube arrays coated substrate were explored by a nanoindentation apparatus. The results illustrate that the Young's modulus and surface hardness of TiO2 nanotube-coated substrates are increased with increasing annealing temperatures (280 1C, 430 1C and 620 1C). The scratch test results show that heat treatment at 430 1C and 620 1C can improve the adhesion strength of Ti/TiO2 coated samples by up to 2860 and 3140 mN, respectively. & 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Metal and Thin Film Mechanics · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting10.1016/j.surfcoat.2011.08.013 ↗
2. Mechanical properties of DLC coating sputter deposited on surface nanocrystallized 304 stainless steel10.1016/j.surfcoat.2012.07.076 ↗
3. Sn(1−x)LaxO2 thin films deposited on AISI 304 stainless steel substrates10.1016/j.ceramint.2014.04.084 ↗
4. Large-area TiO2 nanotube dye-sensitized solar cells using thermal-sprayed Ti layers on stainless steel10.1016/j.ceramint.2013.09.116 ↗
5. Fabrication and deformation behaviour of multilayer Al2O3/ Ti/TiO2 nanotube arrays10.1016/j.jmbbm.2013.01.020 ↗
6. Mechanical property enhancement of Ti-6Al-4V by multilayer thin solid film Ti/TiO2 nanotubular array coating for biomedical application10.1007/s11661-013-2043-x ↗
7. Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation10.1016/j.ceramint.2012.09.081 ↗
8. High-energy ion beam implantation of hydroxyapatite thin films grown on TiN and ZrO2 inter-layers by pulsed laser deposition10.1016/j.tsf.2003.11.119 ↗
9. Signal emitted from plasma during electron-beam welding with deflection oscillations of the beam10.1016/j.jmatprotec.2014.03.031 ↗
10. Yb-fiber laser beam effects on the surface modification of Al–Fe aerospace alloy obtaining weld filet structures, low fine porosity and corrosion resistance10.1016/j.surfcoat.2011.10.007 ↗
11. Residual strain and electrical resistivity dependence of molybdenum films on DC plasma magnetron sputtering conditions10.1016/j.mssp.2014.07.017 ↗
12. A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy10.1007/s00170-013-4738-y ↗
13. Synthesis and properties of Cr–Al–Si–N films deposited by hybrid coating system with high power impulse magnetron sputtering(HIPIMS) and DC pulse sputtering10.1016/S1003-6326(12)61795-6 ↗
14. Effects of negative substrate bias voltage on the structure and properties of aluminum oxide films prepared by DC reactivemagnetron sputtering10.1016/j.apsusc.2012.07.064 ↗
15. Characterization of Nanostructured TiZrN thin films deposited by reactive DC magnetron co-sputtering10.1016/j.proeng.2012.01.1310 ↗
16. Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy10.1016/j.msea.2012.08.123 ↗
17. Dental implants from functionally graded materials10.1002/jbm.a.34588 ↗
18. Preparation of nickel zinc ferrite by electrophoretic deposition10.1149/2.068201jes ↗
19. Mechanistic aspects and growth of large diameter self-organized TiO2 nanotubes10.1016/j.jelechem.2008.01.005 ↗
20. The effect of anodization parameters on the formation of nanoporous TiO2 layers and their photocatalytic activities10.1016/j.jallcom.2014.03.105 ↗
21. Preparation and photocatalytic performance of ZrO2 nanotubes fabricated with anodization process10.1016/j.apsusc.2014.04.047 ↗
22. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper10.1016/j.ijadhadh.2013.09.030 ↗
23. In situ templated synthesis of anatase single-crystal nanotube arrays10.1088/0957-4484/16/10/077 ↗
24. Crystallization and high-temperature structural stability of titanium oxide nanotube arrays10.1557/JMR.2003.0022 ↗
25. Size dependence of thermal stability of TiO2 nanoparticles10.1063/1.1807520 ↗
26. A review on highly ordered, vertically oriented TiO2 nanotube arrays: Fabrication, material properties, and solar energy applications10.1016/j.solmat.2006.04.007 ↗
27. The effect of electrolyte composition on the fabrication of self-organized titanium oxide nanotube arrays by anodic oxidation10.1557/JMR.2005.0020 ↗
28. Nanomechanical and nanotribological properties of bioactive titanium surfaces prepared by alkali treatment10.1016/j.jmbbm.2010.07.005 ↗
29. Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate10.1016/j.actbio.2006.08.004 ↗
30. Direct compressive measurements of individual titanium dioxide nanotubes10.1021/nn900202x ↗
31. Review of instrumented indentation10.6028/jres.108.024 ↗
32. Fabrication of TiO2 nanotube arrays on biologic titanium alloy and properties
33. The elastic moduli of fiber-reinforced materials10.1115/1.3629590 ↗
34. Al-Khatatbeh · J. Phys. Chem. C. Compressibility of Nanocrystalline TiO2 Anatase · 2012 · 116 · 2163510.1021/jp3075699 ↗
35. Nanomechanicsof biocompatible TiO2 nanotubes by interfacial force microscopy (IFM)10.1016/j.jmbbm.2008.10.004 ↗
36. Formation of rutile nuclei at anatase {112} twin interfaces and the phase transformation in nanocrystalline titania10.2138/am-1999-5-621 ↗
37. Anatase to rutile transformation in titania powders10.1111/j.1151-2916.2001.tb00709.x ↗
38. Cox · 1992
39. Harold · 1989
40. Influence of nitrogen doping on the defect formation and surface properties of TiO2 rutile and anatase10.1103/PhysRevLett.96.026103 ↗
41. Mechanism of the inhibiting effect of phosphate on the anatase rutile transformation induced by thermal and mechanical treatment of TiO210.1039/f19837902765 ↗
42. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
43. S. Baradaran, E. Zalnezhad, W.J. Basirun, A.M.S. Hamouda, M. Sookhakian, Ahmed A.D. Sarhan, Y. Alias, Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular array coating on Ti-6Al-4V. Surf. Coat. Technol. doi:10.1016/j.surfcoat.2014.07.046.10.1016/j.surfcoat.2014.07.046 ↗
44. Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications10.1016/j.jmbbm.2008.07.004 ↗