journal article·2014-08

Dielectric and electromagnetic wave absorbing properties of TiC/epoxy composites in the GHz range

Yuan Wang, Fa Luo, Wancheng Zhou, Dongmei Zhu

Ceramics International· Volume 40· Issue 7
Publisher page

Abstract

Abstract The complex permittivity and reflection loss of TiC powders filled with epoxy resin were investigated in the frequency range of 2.6–18 GHz. Both the real and imaginary parts of the complex permittivity increased with increasing TiC content. A rapid increase in complex permittivity and strong frequency dependence characteristics was observed for the composite filled with high content of TiC. Based on the transmission line theory, single-layer and multi-layer absorbing coatings were designed. For single-layer coatings, the reflection loss below −5 dB (over 70% microwave absorbing) can be obtained in the frequency range of 13–18 GHz for the composite with 50 wt% TiC and 7–15.2 GHz for the composite with 60 wt% TiC. By optimizing the absorber structure and the associated thickness, the absorbing bandwidth of the multi-layer absorber can be largely broadened. The reflection loss below −5 dB can be obtained in the frequency range of 2.9–18 GHz for the four-layer absorber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. TiC–TiB2 composites: a review of phase relationships, processing and properties10.1016/j.jeurceramsoc.2007.11.011 ↗
2. Vinoy · 1996
3. Development of the composite RAS (radar absorbing structure) for the X-band frequency range10.1016/j.compstruct.2005.07.021 ↗
4. Microwave absorption study of carbon nanotubes dispersed hard/soft ferrite nanocomposite10.1016/j.ceramint.2012.02.034 ↗
5. Microwave dielectric properties of Al-doped ZnO powders synthesized by coprecipitation method10.1016/j.ceramint.2013.04.056 ↗
6. Polymeric nanocomposites for electromagnetic wave absorption10.1007/s10853-009-3561-1 ↗
7. Electrical response and functionality of polymer matrix-titanium carbide composites10.3144/expresspolymlett.2010.30 ↗
8. Dielectric behavior of TiC-PVDF nanocomposites10.1002/pssr.200802232 ↗
9. Novel smart polymeric composites for thermistors and electromagnetic wave shielding effectiveness from TiC loaded styrene-butadiene rubber10.1007/BF03218329 ↗
10. Epoxy-silicone filled with multi-walled carbon nanotubes and carbonyl iron particles as a microwave absorber10.1016/j.carbon.2010.07.014 ↗
11. Effect of carbon nanofibres dispersion on the microwave absorbing properties of CNF/epoxy composites10.1016/j.compscitech.2008.11.026 ↗
12. Microwave electromagnetic property of SiO2-coated carbonyl iron particles with higher oxidation resistance10.1016/j.physb.2010.11.079 ↗
13. Gradient multilayer structure design of CNTs/SiO2 composites for improving microwave absorbing properties10.1016/j.matdes.2010.12.043 ↗
14. Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel-coated carbon fibers10.1016/j.compscitech.2009.09.011 ↗
15. Design of radar absorbing structures using glass/epoxy composite containing carbon black in X-band frequency ranges10.1016/j.compositesb.2003.08.011 ↗
16. Double-layer microwave absorber based on ferrite and short carbon fiber composites10.1016/j.matchemphys.2007.04.056 ↗
17. Design, preparation and microwave absorbing properties of resin matrix composites reinforced by SiC fibers with different electrical properties10.1016/j.mseb.2013.09.019 ↗
18. Evolution of double magnetic resonance behavior and electromagnetic properties of flake carbonyl iron and multi-walled carbon nanotubes filled epoxy-silicone10.1016/j.jallcom.2013.09.002 ↗