Fabrication of SiOC ceramic with cellular structure via UV-Assisted direct ink writing
Source abstract
Abstract
Abstract In this study, polysiloxane resin was modified at the molecular scale to make it amenable to ultraviolet-curing and suitable for direct ink writing. The characterization results regarding the rheological properties and infrared spectra demonstrated that the conversion of C C is proportional to the viscosity and modulus of ink. As a result, three-dimensional cellular structures with a certain span and tailored porosity were obtained. The printed structures were then subjected to pyrolysis at temperatures higher than 1000°C to form uniform, crack-free, dense SiOC cellular ceramic structures, with ceramic yield of up to 70% and linear shrinkage as low as 25%. This technique enables the inexpensive and fast fabrication of SiOC ceramic products with relatively complex shapes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. 3D-printing of lightweight cellular composites10.1002/adma.201401804 ↗
2. Rheology and crosslinking of a low-viscosity SiOC preceramic polymer10.1016/j.ceramint.2016.01.171 ↗
3. Photoactive hybrid materials with fractal designs produced via 3D printing and plasma grafting technologies10.1021/acsami.9b06982 ↗
4. Polymer-derived SiOC aerogel with hierarchical porosity through HF etching10.1016/j.ceramint.2016.04.101 ↗
5. Additive manufacturing of polymer-derived ceramics10.1126/science.aad2688 ↗
6. Additive manufacturing of ceramic structures by laser engineered net shaping10.3901/CJME.2015.0608.078 ↗
7. Stereolithography of SiOC ceramic microcomponents10.1002/adma.201503470 ↗
8. High rate capability of SiOC ceramic aerogels with tailored porosity as anode materials for Li-ion batteries10.1016/j.electacta.2015.01.088 ↗
9. Polymer - derived ceramics: 40 Years of Research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
10. Electrical conductivity measurements as a microprobe for structure transitions in polysiloxane derived Si-O-C ceramics10.1016/S0955-2219(00)00068-6 ↗
11. Digital light processing of ceramic components from polysiloxanes10.1016/j.jeurceramsoc.2017.07.033 ↗
12. Direct-write assembly of ceramics from colloidal inks10.1016/S1359-0286(02)00031-1 ↗
13. Suspensions designed for direct ink writing10.15541/jim20150158 ↗
14. Direct writing technology—advances and developments10.1016/j.cirp.2008.09.006 ↗
15. Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer10.1016/j.jeurceramsoc.2016.01.047 ↗
16. Direct ink writing of silicon carbide for microwave optics10.1002/adem.201500298 ↗
17. Mechanical properties of calcium phosphate scaffolds fabricated by robocasting10.1002/jbm.a.31587 ↗
18. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
19. Effect of solvent in preparation of SiOC bulk ceramics10.1016/j.matchemphys.2018.07.043 ↗
20. Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils10.1002/adma.200902192 ↗
21. Direct writing of three-dimensional polymer scaffolds using colloidal gels10.1002/adfm.200500666 ↗
22. Inorganic–organic hybrid coatings on polycarbonate. : spectroscopic studies on the simultaneous polymerizations of methacrylate and silica networks10.1016/S0022-3093(02)01862-8 ↗
23. Photocatalytic performance of hybrid SiO2−TiO2 films10.1021/jp911495h ↗
24. Mechanical properties of silica–(meth)acrylate hybrid coatings on polycarbonate substrate10.1016/S0032-3861(02)00542-6 ↗
25. A comparative FTIR study of thermal and photo-polymerization processes in hybrid sol–gel films10.1016/j.jnoncrysol.2003.09.043 ↗
26. Flash pyrolysis of polymer-derived SiOC ceramics10.1016/j.jeurceramsoc.2018.07.010 ↗
27. High-temperature behavior of silicon oxycarbide glasses in air environment10.1016/j.ceramint.2011.03.053 ↗
28. The Scherrer equation versus the 'Debye-Scherrer equation10.1038/nnano.2011.145 ↗