journal article·2019-04

A comparative study of microstructural and tribological properties of N-DLC/DLC double layer and single layer coatings deposited by DC-pulsed PACVD process

Omid Sharifahmadian, Farzad Mahboubi

Ceramics International· Volume 45· Issue 6
Publisher page

Abstract

Abstract Diamond-like carbon (DLC) coatings have been attractive for their unique properties such as high wear resistance, high hardness, chemical inertness, and biocompatibility. The double layer N-DLC/DLC coating was deposited by the D.C. Pulsed Plasma Assisted Chemical Vapour Deposition (PACVD) technique on the H13 Tool Steel. The structural, mechanical, and tribological properties of the double layer coating were compared with the single layer DLC and N-DLC coatings. The tribological behavior of the coatings was evaluated by the rotational ball-on-disk tribometer and the contact profilometer. The structural changes in the coatings were investigated by Attenuated-Total Reflectance Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Visible Raman Spectroscopy, and X-ray Photoelectron Spectroscopy (XPS). The N-DLC/DLC coating showed excellent wear properties compared to single layer coatings. High stability and low friction coefficient are the most important characteristics of the double layer coating. It was found that the gradient properties in the mechanical and chemical composition of the N-DLC/DLC coating improve tribological properties and adhesion to the substrate compared to single layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Wear and life characteristics of microwave-sintered copper-graphite composite10.1007/s11665-012-0161-z ↗
2. Electrodeposition of Ni-Fe alloys, composites, and nano coatings – a review10.1016/j.jallcom.2016.08.329 ↗
3. A role for tribology in life cycle design
4. Polymer composites for tribological applications
5. Carbon nanomaterials in tribology10.1016/j.carbon.2017.04.027 ↗
6. A comparative study of tribological characteristics of hydrogenated DLC film sliding against ceramic mating materials for helium applications
7. Tribological performance of an H-DLC coating prepared by PECVD10.1016/j.apsusc.2016.04.184 ↗
8. History of diamond-like carbon films – from first experiments to worldwide applications10.1016/j.surfcoat.2014.01.031 ↗
9. On the deposition and properties of DLC protective coatings on elastomers: a critical review10.1016/j.surfcoat.2014.08.016 ↗
10. Structure and tribological behavior of diamond-like carbon coatings deposited on the martensitic stainless steel: the influence of gas composition and temperature10.1016/j.diamond.2017.11.007 ↗
11. Hard and adherent a-C: H gradient coatings by stress engineering10.1016/j.jallcom.2018.06.310 ↗
12. Optimization of pulsed DC PACVD parameters: toward reducing wear rate of the DLC films10.1016/j.apsusc.2016.06.182 ↗
13. THardness effect of DLC on tribological properties for sliding bearing under boundary lubrication condition in additive-free mineral base oil10.1016/j.triboint.2013.01.016 ↗
14. RSM base study of the effect of deposition temperature and hydrogen flow on the wear behavior of DLC films10.1016/j.triboint.2015.06.026 ↗
15. Nitrogen doping for adhesion improvement of DLC film deposited on Si substrate by filtered cathodic vacuum Arc (FCVA) technique10.1016/j.apsusc.2014.03.059 ↗
16. Effect of plasma energy on enhancing biocompatibility and hemocompatibility of diamond-like carbon film with various titanium concentrations10.1016/j.jallcom.2008.11.043 ↗
17. Microstructure, mechanical and tribological characterization of CrN / DLC / Cr-DLC multilayer coating with improved adhesive wear resistance
18. Properties of W incorporated diamond-like carbon films prepared by pulsed-laser deposition10.1016/j.jallcom.2009.01.044 ↗
19. Surface properties and biological behaviour of Si-DLC coatings fabricated by a multi-target DC-RF magnetron sputtering method for medical applications10.1016/j.diamond.2016.01.025 ↗
20. Structural evolution and tribological behavior of nitrogen-doped DLC coatings deposited by pulsed DC PACVD method10.1016/j.diamond.2018.11.004 ↗
21. The investigation of the structures and tribological properties of F-DLC coatings deposited on Ti-6Al-4V alloys10.1016/j.surfcoat.2017.02.065 ↗
22. Excellent adhered thick diamond-like carbon coatings by optimizing hetero-interfaces with sequential highly energetic Cr and C ion treatment10.1016/j.jallcom.2017.11.057 ↗
23. Author ’s accepted manuscript
24. Investigation of Cr (N)/DLC multilayer coatings elaborated by PVD for high wear resistance and low friction applications10.1016/j.surfcoat.2018.01.052 ↗
25. Residual stress measurement in DLC fi lms deposited by PBIID method using Raman microprobe spectroscopy10.1016/j.surfcoat.2015.10.048 ↗
26. RSM base study of the effect of deposition temperature and hydrogen flow on the wear behavior of DLC films10.1016/j.triboint.2015.06.026 ↗
27. W.C. Oliver, G.M. Pharr, Experiments, 1992.
28. Nitrogen-rich plasma polymers : comparison of films deposited in atmospheric- and low-pressure plasmas10.1016/j.tsf.2008.02.033 ↗
29. RF plasma-polymerization of acetylene : correlation between plasma diagnostics and deposit characteristics10.1016/j.surfcoat.2006.10.025 ↗
30. Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC10.1016/j.apsusc.2013.02.070 ↗
31. Raman spectroscopy of hydrogenated amorphous carbons
32. Effect of sp2/sp3 bonding ratio and nitrogen content on friction properties of hydrogen-free DLC coatings10.1016/j.triboint.2013.02.007 ↗
33. Efficient nitrogen incorporation into amorphous carbon films by double beam method10.1016/j.diamond.2005.01.003 ↗
34. Carbon nitride deposited using energetic species: a review on XPS studies10.1103/PhysRevB.58.2207 ↗
35. Effect of N2/CH4 flow ratio on microstructure and composition of hydrogenated carbon nitride films prepared by a dual DC-RF plasma system10.1016/j.jnoncrysol.2006.10.008 ↗