Effect of plasma sprayed and laser re-melted Al2O3 coatings on hardness and wear properties of stainless steel
Source abstract
Abstract
Commercially available austenic stainless steel substrate was coated with commercially available, raw Al2O3 powder applied by means of plasma spraying method and then re-melted with CO2 laser beam of various parameters. Tribological and mechanical properties of the 120 J/mm and 160 J/mm laser re-melted coatings were compared with the tribological and mechanical properties of the “as-sprayed” coating. The influence of the laser beam of various parameters on the microstructure, phase constituents, and mechanical and tribological properties of the ceramic coating was investigated by means of scanning electron microscopy, light microscopy, computer tomography, X-ray diffraction technique and nanoindentation tests. The micro sliding wear performance of the coatings was tested using a nanoindenter. The study showed an improvement of the mechanical and tribological properties caused by the laser treatment. The best results were achieved for coating re-melted with 120 J/mm laser beam.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Properties of Al2O3 coatings by High velocity suspension flame spraying (HVSFS): effects of injection systems and torch design10.1016/j.surfcoat.2015.03.005 ↗
2. Optimization of plasma spray parameters on the mechanical properties of agglomerated Al2O3–13%TiO2 coated mild steel10.1016/j.matdes.2012.03.019 ↗
3. Structure, micro-hardness and corrosion behaviour of the Al–Si/Al2O3 coatings prepared by laser plasma hybrid spraying on magnesium alloy10.1016/j.vacuum.2015.04.005 ↗
4. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al2O3 composites10.1016/j.surfcoat.2015.01.057 ↗
5. The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings10.1016/j.surfcoat.2012.01.031 ↗
6. Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode10.1016/j.tsf.2003.11.166 ↗
7. Modification of implant material surface properties by means of oxide nano-structured coatings deposition10.1016/j.apsusc.2014.04.110 ↗
8. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3–8wt% TiO2 coatings plasma-sprayed with nanopowders10.1016/j.surfcoat.2008.01.002 ↗
9. Corrosion behavior of plasma sprayed ceramic and metallic coatings on carbon steel in simulated seawater10.1016/j.matdes.2013.06.002 ↗
10. Fretting wear behavior of conventional and nanostructured Al2O3–13wt% TiO2 coatings fabricated by plasma spray10.1016/j.wear.2008.04.012 ↗
11. Influence of composite powders’ microstructure on the microstructure and properties of Al2O3–TiO2 coatings fabricated by plasma spraying10.1016/j.matdes.2014.09.078 ↗
12. Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications10.1016/j.ceramint.2014.06.017 ↗
13. Properties of the thermally sprayed Al2O3–TiO2 coatings deposited on titanium substrate10.1016/j.ijrmhm.2015.03.009 ↗
14. Sliding wear characteristics of plasma-sprayed Al2O3 and Cr2O3 coatings against copper alloy under severe conditions10.1016/j.triboint.2009.04.037 ↗
15. The effect of plasma spray parameters on the cavitation erosion of Al2O3–TiO2 coatings10.1016/j.surfcoat.2010.08.044 ↗
16. The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys10.1016/j.surfcoat.2009.07.032 ↗
17. A contribution to understanding the results of instrumented indentation on thermal spray coatings — Case study on Al2O3 and stainless steel10.1016/j.surfcoat.2013.12.033 ↗
18. Excimer laser surface treatment of plasma sprayed alumina–13% titania coatings10.1016/j.surfcoat.2009.05.034 ↗
19. The effect of laser subsurface layer glazing of the YSZ type coating on microstructure and thermal diffusivity (in polish)
20. Microstructure evolution of laser remelted Al2O3–13wt%TiO2 coatings10.1016/j.jallcom.2013.04.100 ↗
21. Influences of laser remelting on microstructure of nanostructured Al2O3–13wt% TiO2 coatings fabricated by plasma spraying10.1016/j.apsusc.2008.11.082 ↗
22. Laser remelting of plasma-sprayed conventional and nanostructured Al2O3–13wt%TiO2 coatings on titanium alloy10.1016/j.jallcom.2010.06.207 ↗
23. Iwaszko · Surf. Coat. Technol. · 2006 · 201 · 344310.1016/j.surfcoat.2006.07.234 ↗
24. Laser remelting of plasma sprayed nanostructured Al2O3–TiO2 coatings at different laser power10.1016/j.surfcoat.2010.04.028 ↗
25. Laser surface remelting of plasma sprayed nanostructured Al2O3–13wt%TiO2 coatings on titanium alloy10.1016/j.apsusc.2009.06.033 ↗
26. Surface modification of plasma sprayed Al2O3–40wt% TiO2 coatings by pulsed Nd:YAG laser melting10.1016/j.optlastec.2012.09.025 ↗
27. Structure and performance of γ-alumina washcoat deposited by plasma spraying10.1016/S0257-8972(01)01301-9 ↗
28. Microstructure, adhesion, microhardness, abrasive wear resistance and electrical resistivity of the plasma sprayed alumina and alumina–titania coatings10.1016/S0040-6090(97)00738-4 ↗
29. Comparative measurement of indentation fracture toughness with Berkovich and Vickers intender10.1111/j.1151-2916.1992.tb04425.x ↗
30. Relationship between fracture toughness characteristics and morphology of sintered Al2O3 ceramics10.1016/j.ceramint.2010.07.031 ↗
31. Enhancing the sinterability and fracture toughness of Al2O3–TiN0.3 composites10.1016/j.ceramint.2015.11.065 ↗
32. Temperature and porosity effects on the fracture of fine grain size MgO10.1007/BF00553244 ↗
33. Synthesis and characterization of Al2O3–TiC nano-composite by spark plasma sintering10.1016/j.ijrmhm.2015.08.004 ↗
34. Damage mechanisms and cracking behavior of thermal sprayed WC–CoCr coating under scratch testing10.1016/j.wear.2014.02.017 ↗