Effect of Mg2+-and Fe3+-ions on formation mechanism of aluminium titanate
Source abstract
Abstract
Abstract The presence of Mg2+- and Fe3+-ions has an effect on the formation of Al2TiO5. Crystalline phases produced under the influence of the heat treatment have been identified in a heated X-ray diffraction chamber in the temperature range of 20–1500 °C. In the presence of Mg2+- and Fe3+-ions transitional phases are formed in the temperature range of 1000–1350 °C during Al2TiO5 formation. The XRD technique was used to identify the crystalline phases formed. On addition of MgO, chemical composition of the transitional phase formed is Mg0.3Al1.4Ti1.3O5, whereas on addition of Fe2O3 we have calculated a Powder Diffraction File card data for the transitional phase. Determination of the lattice parameters of the Al2TiO5 ceramics produced enabled verification of incorporation of Mg2+- or Fe3+-ions into the crystal lattice of Al2TiO5, i.e. the formation of Mg2+- and Fe3+-containing solid solutions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Grain size/microcraking relations for pseudobrookite oxides10.1111/j.1151-2916.1978.tb16121.x ↗
2. Synthesis, sintering and expansion of Al0,8Mg0,6Ti1,6O5: a low-thermal-expansion material resistant to thermal decomposition10.1023/A:1018611311015 ↗
3. Thermal expansion and mechanical properties of Al2O3–SiO2 system
4. Sintering behavior of Al2TiO5 base ceramics and their thermal properties10.1016/S0272-8842(98)00083-2 ↗
5. Preparation of Al2TiO5 from alkoxides and the effects of additives on its properties10.1023/A:1018605431120 ↗
6. Role of MgO and Fe2O3 additives on the synthesis and properties of aluminium-titanate ceramics
7. Mechanical behaviour of directionally solidified alumina/aluminium-titanate ceramics10.1016/j.actamat.2006.04.015 ↗
8. Microstructure and thermal expansion of Al2TiO5–MgTi2O5 solid solutions obtained by reaction sintering10.1016/S0955-2219(01)00503-9 ↗
9. Sintering behaviour of Al2TiO5 base ceramics and their thermal properties10.1016/S0272-8842(98)00083-2 ↗
10. Aluminium titanate—a literature review. Part 3
11. Combustion synthesis of aluminium titanate: thermal stability10.4028/www.scientific.net/KEM.132-136.209 ↗
12. Comparative study of Al2TiO5 formation during atmospheric sintering and hot pressing
13. Reaction sintering of aluminium titanate. I. Effect of MgO addition10.1016/0955-2219(94)90018-3 ↗
14. Synthesis of aluminium titanate powder by different processing methods
15. Y. Ohaya, M. Hasegawa, K. Hamano, Effect some additives on microstructure and mechanical strength of aluminium titanate ceramics, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, vol. 12, 1987, pp. 81–91.
16. A study of the stabilization of aluminium titanate10.1007/BF00363449 ↗
17. Thermal stabilization of aluminium titanate and properties of aluminium titanate solid solutions10.1007/BF02387756 ↗
18. V. Buscaglia, M. Alvazzi Delfrate, P. Nanni, et al, Factors affecting microstructure evolution during reaction sintering of Al2TiO5 ceramics, Ceramics: Charting the Future, editor: P. Vincenzini, © Techna Srl, 1995, 1867–1874.