Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi 2 -SiC whisker and TaSi 2 -MoSi 2 -SiC whisker by slurry method
Source abstract
Abstract
Abstract This paper presents a double-layered coating system consisting of MoSi2 ceramic reinforced with SiC whiskers and a MoSi2-TaSi2 ceramic coating reinforced with SiC whiskers. This system improves oxidation resistance of carbon-bonded carbon fiber (CBCF) composites. Double-layer coating was about 160 µm in thickness and no interfaces or cracks between the layer and matrix were observed. Isothermal oxidation tests revealed that as-prepared coating presented excellent oxidation resistance, which could protect CBCF composites at 1500 °C for 160 min with 0.02% weight loss, whereas weight loss of single MoSi2 ceramic coating reinforced with SiC whiskers reached 0.08%. High-temperature resistance barrier of the glassy phase and Ta2O5 had a positive effect on improving the oxidation resistance of double-layer coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Carbon-bonded carbon fiber composites containing uniformly distributed silicon carbide10.1039/c3ra44913k ↗
2. Effect of halogen purification and heat treatment on thermal conductivity of high porosity carbon/carbon composite thermal insulation10.1023/A:1004770429911 ↗
3. Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique10.1016/j.carbon.2013.03.049 ↗
4. Mechanical properties of low-density SiC-coated carbon-bonded carbon fiber composites10.1111/j.1744-7402.2011.02658.x ↗
5. Mechanical properties in flexure and tension of low density carbon-carbon composites10.1016/0008-6223(94)90139-2 ↗
6. Oxidation protection for carbon fibre composites10.1007/BF00357844 ↗
7. B2O3 modified SiC-MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation10.1016/j.corsci.2009.06.033 ↗
8. A SiC/glass oxidation protection coating for carbon/carbon composites for application at 1773K10.1016/j.carbon.2006.12.014 ↗
9. A SiC-ZrB2-ZrC coating toughened by electrophoretically-deposited SiC nanowires to protect C/C composites against thermal shock and oxidation10.1016/j.apsusc.2015.05.028 ↗
10. Oxidation resistant graded multiphase coating for carbon/carbon composites10.1016/j.surfcoat.2013.06.105 ↗
11. Oxidation behavior of Boron-modified Mo5Si3 at 800℃−1300℃10.1111/j.1151-2916.1996.tb08528.x ↗
12. A multilayer MoSi2-SiC-B coating to protect SiC-coated carbon/carbon composites against oxidation10.1016/j.vacuum.2012.04.045 ↗
13. High-temperature protective coatings for carbon fibers10.1134/S0020168512030168 ↗
14. Ablation behaviour of C/C and C/C–ZrC–SiC composites with cone-shaped holes under an oxyacetylene flame10.1016/j.corsci.2015.09.022 ↗
15. Ablation behavior of rare earth La-modified ZrC coating for SiC-coated carbon/carbon composites under an oxyacetylene torch
16. Ablation mechanism of C/C-ZrB2-ZrC-SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB210.1016/j.corsci.2015.05.064 ↗
17. Ablation resistance of wedge-shaped C/C-ZrB2 -ZrC-SiC composites exposed to an oxyacetylene torch10.1016/j.corsci.2016.08.010 ↗
18. Ablation resistance of SiC–HfC–ZrC multiphase modified carbon/carbon composites10.1016/j.corsci.2015.06.037 ↗
19. Ablative property and mechanism of C/C-ZrB2 -ZrC-SiC composites reinforced by SiC networks under plasma flame10.1016/j.corsci.2016.02.015 ↗
20. Microstructure and oxidation behavior of C/C-ZrB2-SiC composites coated with SiC coating at high temperature10.1016/j.corsci.2015.08.015 ↗
21. HfC nanowire-toughened TaSi2-TaC-SiC-Si multiphase coating for C/C composites against oxidation10.1016/j.corsci.2014.10.048 ↗
22. Oxidation resistance of fully dense ZrB2 with SiC, TaB2 and TaSi2 additives
23. SiC/(SiC+glass)/glass coating for carbon-bonded carbon fiber composites10.1039/C6RA06639A ↗
24. Preparation of a muti-composition coating for oxidation protection of modified carbon-carbon fiber composites by a rapid sintering method10.1016/j.surfcoat.2015.03.014 ↗
25. Bamboo-shaped SiC nanowire-toughened SiC coating for oxidation protection of C/C composites10.1016/j.corsci.2012.12.009 ↗
26. Influence of SiC nanowires on the properties of SiC coating for C/C composites between room temperature and 1500°C10.1016/j.corsci.2011.05.046 ↗
27. SiC nanowire toughened ZrB2-SiC ablative coating for SiC coated C/C composites10.1016/j.ceramint.2015.07.175 ↗
28. Effect of the incorporation of SiC nanowire on mullite/SiC protective coating for carbon/carbon composites10.1016/j.corsci.2016.02.022 ↗
29. Nanowire-toughened transition layer to improve the oxidation resistance of SiC-MoSi2-ZrB2, coating for C/C composites10.1016/j.corsci.2016.05.013 ↗
30. Microstructure and field emission property of Bridgman-grown Si–TaSi2, eutectic in situ, composite10.1016/j.matlet.2013.02.119 ↗
31. Microstructure, radiative property and thermal shock behavior of TaSi2-SiO2-borosilicate glass coating for fibrous ZrO2 ceramic insulation10.1016/j.jallcom.2015.10.003 ↗
32. High temperature structure evolution of macoporous SiOC ceramics prepared by a sol-gel method10.1016/j.ceramint.2015.05.056 ↗
33. ZrB2/SiC as a protective coating for C/SiC composites: effect of high temperature oxidation on mechanical properties and anti-ablation property10.1016/j.compositesb.2012.07.007 ↗
34. Microstructure and oxidation behavior of sol-gel mullite coating on SiC-coated carbon/carbon composites10.1016/j.jeurceramsoc.2015.06.033 ↗
35. Oxidation protection of carbon/carbon composites with a plasma-sprayed ZrB2-SiC-Si/Yb2SiO5/LaMgAl11O19 coating during thermal cycling10.1016/j.jeurceramsoc.2015.01.015 ↗
36. Effect of SiC, TaB2 and TaSi2 additives on the isothermal oxidation resistance of fully dense zirconium diboride10.1557/jmr.2009.0216 ↗
37. Synethsis and mechanical properties of Mo≤5Si≤3C≤1 and based composies10.1016/S0966-9795(97)00039-3 ↗
38. Oxidation protection of C/C composites with a multilayer coating of SiC and Si + SiC + SiC nanowires10.1016/j.carbon.2011.10.048 ↗