Investigation of structural, optical, dielectric and magnetic studies of Mn substituted BiFeO3 multiferroics

Abstract A series of Mn doped BiFeO 3 with composition BiMn x Fe 1−x O 3 (x = 0.0, 0.025, 0.05, 0.075, 0.1) was synthesized via a citrate precursor method. Structural, morphological, optical, electrical and magnetic properties were investigated by using various measurement techniques. XRD patterns confirmed that the materials possess distorted rhombohedral structure with space group R 3 c . Average crystallite size was found to be in the range 18–36 nm. A decrease in the value of lattice parameters has been observed due to contraction of unit cell volume with Mn doping. Higher tensile strain for the prepared nanoparticles was observed in Hall-Williamson Plot. Field Emission Scanning Microscopy (FESEM) showed the spherical, uniform, dense nanoparticles in the range 80–200 nm. Reduction in grain size was observed which may be due to suppression of grain growth with Mn doping. FTIR studies reported two strong peaks at 552 cm −1 and 449 cm -1 which confirmed the pervoskite structure. Dielectric properties were studied by measuring the dielectric constant and loss in the frequency range 1 kHz to 1 MHz. Magnetic hysteresis loop showed the retentivity (M r ) increasing from 0.0514 emu/g of BFO to 0.0931 emu/g of 10% Mn doping. Coercivity was found to increase upto 0.0582 T for 5% Mn doping and then reduced to 0.0344 T for 7.5% Mn doping. Saturation magnetization was observed to increase from 0.6791 emu/g for BFO to 0.8025 emu/g for 7.5% and then reduced to 0.6725 emu/g for 10% Mn doping in BFO. Improvement in dielectric and magnetic properties makes this material as a promising candidate for multifunctional device applications.