journal article·2007-03

Influence of ZrO2 on the thermo-mechanical response of nano-ZTA

D. Sarkar, S. Adak, M.C. Chu, S.J. Cho, N.K. Mitra

Ceramics International· Volume 33· Issue 2
Publisher page

Abstract

Zirconia dispersed alumina powders have been synthesized in homogenous condition by following the wet interaction process at varying ZrO2 content and the thermo-mechanical behavior of the same has been studied. The tetragonal phase is retained at room temperature without any deliberate addition of stabilizer, which has been explained on the basis of particle size effect in terms of lower surface energy of the t-phase compensating for the difference in chemical free energy. Flexural strength follows an inverse relation with temperature due to reduction of driving force for t ! m transformation. The toughness and strength reduce significantly above 10 mol.% ZrO2 beyond which comparatively large grain growth is observed. The thermal expansion hysteresis associated with t ! m transformation is evident with martensitic temperature influenced by ZrO2 content and grain size. # 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Strength-toughness relations in sintered and isostatically hot pressed ZrO2-toughened Al2O310.1111/j.1151-2916.1986.tb07401.x ↗
2. Suppressed grain growth in final stage sintering of Al2O3 with dispersed ZrO2 particles10.1007/BF00720417 ↗
3. Al2O3-ZrO2 ceramics prepared from CVD powders
4. Low-temperature sintering of seeded sol–gel-derived, ZrO2-toughened Al2O3 composites10.1111/j.1151-2916.1989.tb05950.x ↗
5. Strength and fracture toughness of hot isostatic-pressed Y2O3-partially stabilized ZrO2/Al2O3 composites10.1111/j.1151-2916.1985.tb15251.x ↗
6. Transformation toughening in sol–gel-derived alumina-zirconia composites10.1111/j.1151-2916.1997.tb03089.x ↗
7. B. Lawn, Fracture of Brittle Solids, second ed., Cambridge Solid State Science Series, Cambridge University Press, Oxford, UK, 1993.10.1017/CBO9780511623127 ↗
8. Stability of tetragonal ZrO2 particles in ceramics matrices10.1111/j.1151-2916.1982.tb09946.x ↗
9. Critical microstructures for microcracking in Al2O3-ZrO2 composites10.1111/j.1151-2916.1982.tb09939.x ↗
10. Wolten · J. Am. Ceram. Soc. · 1963 · 46 · 41810.1111/j.1151-2916.1963.tb11768.x ↗
11. The grain size dependence of the mechanical properties in TZP ceramics
12. Grain-size dependence of toughness and transformability of 2mol.% Y-TZP10.1007/BF01742233 ↗
13. Grain size-dependent transformation behavior in polycrystalline tetragonal zirconia ceramics
14. Gletter · Prog. Mater. Sci. · 1989 · 33 · 22310.1016/0079-6425(89)90001-7 ↗
15. Nieman · J. Mater. Res. · 1991 · 6 · 101210.1557/JMR.1991.1012 ↗
16. D. Sarkar, S. Adak, N.K. Mitra, Preparation and characterization of Al2O3-ZrO2 nanocomposite, Part I: Powder Synthesis and Transformation Behavior during Fracture, Compos. Part A: Appl. Sci. Manufac., accepted 2005.
17. A critical evaluation of indentation techniques for measuring fracture toughness: I. Direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
18. Phase analysis in zirconia systems10.1111/j.1151-2916.1972.tb11290.x ↗
19. Reaction-sintered mullite–zirconia composites by colloidal processing of alumina–zircon–CeO2 mixtures10.1016/j.msea.2003.11.024 ↗
20. Cambier · Br. Ceram. Trans. J. · 1984 · 83 · 196
21. Influence of ZrO2 grain size and content on the transformation response in the Al2O3-ZrO2 (12mol.% CeO2) system10.1111/j.1151-2916.1993.tb03656.x ↗
22. Hall · Proc. Phys. Soc. (Lond.) · 1951 · B64 · 74710.1088/0370-1301/64/9/303 ↗
23. Petch · J. Iron Steel Inst. · 1953 · 174 · 25
24. Nanocrystalline materials10.1179/imr.1995.40.2.41 ↗
25. Transformation toughening. Part 4. Fabrication, fracture strength and toughness of Al2O3-ZrO2 composites10.1007/BF00809057 ↗
26. Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics10.1111/j.1151-2916.1969.tb15848.x ↗
27. Transformation toughening and grain size control in β″-Al2O3/ZrO2 composites10.1007/BF00556096 ↗