Effect of Na 2 SiO 3 ·5H 2 O concentration on microstructure and mechanical properties of plasma electrolytic oxide coatings on AZ31 Mg alloy produced by twin roll casting
Source abstract
Abstract
Abstract In this study, AZ31 Mg alloys produced by twin roll casting (TRC) were coated by plasma electrolytic oxidation (PEO) in solution of potassium hydroxide (KOH) and different concentration of sodium metasilicate pentahydrate (Na 2 SiO 3 ·5H 2 O) electrolytes at 0.140 A/cm 2 current density for 60 min. The phase structure, morphology, hardness, adhesion strength, surface roughness and wear resistance of the PEO coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), micro-hardness tester, micro-scratch tester, profilometer and tribometer, respectively. The XRD results indicated that Forsterite (Mg 2 SiO 4 ) and Periclase (MgO) phases were formed on the surface of the coated magnesium alloys. The surface of the coatings is very porous and rough due to the presence of micro-discharges through PEO process. It was seen that the wear rate, hardness and surface roughness of the coatings were increased when the concentration of Na 2 SiO 3 ·5H 2 O electrolyte was increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Biodegradation kinetics of modified magnesium-based materials in cell culture medium10.1016/j.corsci.2011.01.014 ↗
2. Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy10.1016/j.msec.2010.03.007 ↗
3. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
4. Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment10.1016/j.actbio.2008.05.014 ↗
5. Fatigue properties of Keronite((R)) coatings on a magnesium alloy10.1016/S0257-8972(03)00877-6 ↗
6. Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate–fluoride solutions and evaluation of corrosion resistance10.1016/j.apsusc.2004.11.031 ↗
7. Microarc oxidation of corrosion resistant ceramic coating on a magnesium alloy10.1016/j.matlet.2005.11.066 ↗
8. Critical discussion of the results from different corrosion studies of Mg and Mg alloys for biomaterial applications10.1016/j.actbio.2009.12.048 ↗
9. Effects of microarc oxidation surface treatment on the mechanical properties of Mg alloy and Mg matrix composites10.1016/j.msea.2006.10.133 ↗
10. Study on microarc oxidation of AZ31B magnesium alloy in alkaline metal silicate solution10.1016/j.elecom.2008.08.048 ↗
11. Effect of high power diode laser surface melting on wear resistance of magnesium alloys10.1016/j.wear.2005.01.036 ↗
12. Investigation of plasma electrolytic oxidation process on AZ91D magnesium alloy10.1016/j.cap.2007.12.007 ↗
13. Electroless Ni-P/Ni-B duplex coatings for improving the hardness and the corrosion resistance of AZ91D magnesium alloy10.1016/j.apsusc.2008.01.144 ↗
14. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
15. Surface morphology, composition and thermal behavior of tungsten-containing anodic spark coatings on aluminium alloy10.1016/S0040-6090(03)01318-X ↗
16. Features of film growth during plasma anodizing of Al 2024/SiC metal matrix composite10.1016/j.apsusc.2005.08.029 ↗
17. Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy10.1016/j.surfcoat.2006.10.029 ↗
18. Effect of potassium fluoride in electrolytic solution on the structure and properties of microarc oxidation coatings on magnesium alloy10.1016/j.apsusc.2005.01.007 ↗
19. Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride10.1016/j.surfcoat.2015.03.032 ↗
20. Correlation between KOH concentration and surface properties of AZ91 magnesium alloy coated by plasma electrolytic oxidation10.1016/j.surfcoat.2010.09.055 ↗
21. Corrosion performance of plasma electrolytic oxidized AZ31 magnesium alloy in silicate solutions with different additives10.1016/j.surfcoat.2010.03.032 ↗
22. Characterization and mechanical properties of coatings on magnesium by microarc oxidation10.1016/j.apsusc.2012.08.099 ↗
23. Corrosion and wear properties of PEO coatings formed on AM60B alloy in NaAlO2 electrolytes10.1016/j.apsusc.2011.05.115 ↗
24. Characterization of AZ31 Mg Alloy coated by plasma electrolytic oxidation10.1016/j.vacuum.2012.01.009 ↗
25. Effect of electrolyte on mechanical properties of AZ31B Mg alloy in electrolytic plasma processing10.1016/S1003-6326(14)63298-2 ↗
26. Effect of Na2SiO3 solution concentration of micro-arc oxidation process on lap-shear strength of adhesive-bonded magnesium alloys10.1016/j.apsusc.2014.06.117 ↗
27. Adsorption orientation of sodium of polyaspartic acid effect on anodic films formed on magnesium alloy10.1016/j.apsusc.2011.03.130 ↗
28. Analyses of reinforcement phases during plasma electrolytic oxidation on magnesium matrix composites10.1016/j.surfcoat.2014.11.062 ↗
29. Characterization of AC PEO coatings on magnesium alloys10.1016/j.surfcoat.2009.02.011 ↗
30. Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions10.1016/j.apsusc.2005.09.067 ↗
31. Effects of spark discharge on the anodic coatings on magnesium alloy10.1016/j.matlet.2005.09.015 ↗
32. Electrochemical performance of microarc oxidation films formed on AZ91D magnesium alloy in silicate and phosphate electrolytes10.1016/j.surfcoat.2005.05.039 ↗
33. Composition and thermal properties of the coating containing mullite and alumina10.1016/j.matchemphys.2005.07.073 ↗
34. Generation mechanism of microdischarges during plasma electrolytic oxidation of Al in aqueous solutions10.1016/j.corsci.2008.10.039 ↗
35. Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application10.1016/j.apsusc.2009.06.116 ↗
36. Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation10.1016/j.jallcom.2011.06.059 ↗
37. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology10.1016/S0257-8972(02)00918-0 ↗
38. Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D10.1016/j.electacta.2006.10.066 ↗
39. Influence of sodium silicate concentration on structural and tribological properties of microarc oxidation coatings on 2017A aluminum alloy substrate10.1016/j.jallcom.2010.06.008 ↗
40. Brushan · 2002
41. Anodizing of pure magnesium in KOH–aluminate solutions under sparking10.1149/1.1391838 ↗