Additive and intensive grinding effects on the synthesis of cordierite
Source abstract
Abstract
Abstract Cordierite was mechanochemically synthesized by mixing proper amounts of kaolin, talc and Al(OH) 3 . Full factorial experiments were planned, conducted, and the results were analyzed by the use of statistical techniques in order to understand the effects of process variables on the amount of synthesized product. The powder products were analyzed by XRD, DTA, and SEM-EDS. As a result of the statistical analysis, temperature was found to be the most important factor. Based on XRD peak intensity measurements, the cordierite mixture was completely amorphized by grinding at 300 rpm for 60 min. Cordierite was successfully produced at temperatures as low as 1150 °C by using the mixture after intensive grinding. The combined effect of magnesium borate additive and grinding on cordierite synthesis was also studied. These factors successfully decreased the synthesis temperature down to 1000 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Cordierite glass-ceramics for multilayer ceramic packing
2. Mechanical and thermal behaviour of cordierite-zirconia composites10.1016/S0272-8842(01)00061-X ↗
3. Development of properties in cordierite kiln furniture
4. Preparation of dense cordierite ceramics from magnesium compounds and kaolinite without additives10.1016/S0272-8842(00)00013-4 ↗
5. Grinding effects on the synthesis and sintering of cordierite10.1111/j.1151-2916.1992.tb05608.x ↗
6. Citric acid effect on aqueous sol–gel cordierite synthesis10.1016/S0022-3093(00)00157-5 ↗
7. Ö. Çakır, Production of Cordierite from Domestic Raw Materials, M.Sc. thesis, 1981. Middle East Technical University, Ankara.
8. Reaction and fired property studies of cordierite compositions10.1111/j.1151-2916.1954.tb13995.x ↗
9. Effect of Grinding Time and MgO Source on Cordierite Formation
10. Mechanochemical activation of minerals on the cordierite synthesis10.1016/j.tca.2003.08.017 ↗
11. Mechanical activation of the gamma to alpha transition in Al2O310.1016/S0032-5910(96)03244-5 ↗
12. Chiang · 1997
13. Effects of (B2O3, P2O5) additives on microstructural development and phase-transformation kinetics of stoichiometric cordierite glasses10.1111/j.1151-2916.2000.tb01364.x ↗
14. Low-Temperature fabrication of cordierite ceramics from kaolinite and magnesium hydroxide mixtures with Boron Oxide Additions10.1111/j.1151-2916.1999.tb01837.x ↗
15. Synthesis and sintering of cordierite at low temperature from kaolin and magnesium hydroxide10.4028/www.scientific.net/KEM.264-268.925 ↗
16. Investigation of some physical and chemical properties with respect to processing of kaolin samples from Sivas deposits in Turkey10.4028/www.scientific.net/KEM.264-268.1423 ↗
17. Omya Mining Company, Product Information for Egyptian Talc Et 5, Istanbul, 2004.
18. E. Yalamaç, Preparation of Fine Spinel and Cordierite Ceramic Powders by Mechano-chemical Techniques, M.Sc. Thesis, 2004. Izmir Institute of Technology, Izmir.
19. Low temperature synthesis of spinel powders by mechanical grinding10.4028/www.scientific.net/KEM.264-268.53 ↗
20. Removal of Ga(III) from aqueous solution by adsorption on activated bentonite using a factorial design10.1016/S0043-1354(01)00498-5 ↗
21. H. Harris, W. Lautenberger, Strategy of Experimentation, E.I. Dupont de Nemours & Co. Inc. Short Course Notes, 1976.