The influence of B4C and MgB2 additions on the behavior of MgO–C bricks
Source abstract
Abstract
Abstract Carbon-containing refractory materials have received great attention over the last years due to their importance in the steelmaking process. The oxidation of carbon present in refractory materials at temperatures above 500 °C is usually accompanied by the decrease of their mechanical strength and chemical resistance. Aiming to improve the oxidation resistance of carbon-oxide refractories, the use of materials known as antioxidants has been extensively studied. In this work we evaluated the performance of MgB 2 and B 4 C antioxidants when incorporated into MgO–C bricks. We observed that the co-addition of metallic antioxidants and B 4 C or MgB 2 leads to refractory bricks with enhanced hot modulus of rupture and resistance against oxidation and slag corrosion. However, the excessive addition of these antioxidants could impair the performance of the obtained bricks. Thus, when determining the optimum concentration of MgB 2 and B 4 C to be added into MgO–C refractories, one must take into consideration this behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. The effect of antioxidants on the oxidation behavior of magnesia-carbon refractory bricks10.1016/j.ceramint.2006.10.004 ↗
2. R-curve behavior of MgO–C refractories (comportamento de curva-R de refratários de MgO–C)10.1590/S0366-69132000000100008 ↗
3. Brazilian flake graphites for carbon containing refractories
4. Carbon containing castables: current status and future prospects10.1179/096797801125000410 ↗
5. Oxidation protection of MgO–C refractories by means of Al8B4C710.1111/j.1151-2916.2001.tb00701.x ↗
6. Effect of Al antioxidant on the rate of oxidation of carbon in MgO–C refractory10.1111/j.1551-2916.2006.01391.x ↗
7. Thermochemistry and microstructures of MgO–C refractories containing various antioxidants10.1016/S0955-2219(00)00308-3 ↗
8. V.G. Domiciano, Carbon-rich refractory concretes [concretos refratários contendo elevado teor de carbono], M.Sc. Dissertation, Federal University of São Carlos, São Carlos, 2005 (in portuguese).
9. Oxidation protection of CaO–ZrO2–C refractories by addition of SiC10.1016/j.ceramint.2006.07.004 ↗
10. Carbon-based refractories10.2109/jcersj.112.517 ↗
11. A.P. Luz, New refractory concretes with high content of carbon [concretos refratários avançados com alto teor de carbono], Ph.D. Thesis, Federal of São Carlos, São Carlos, 2010 (in portuguese).
12. Water corrosion resistance of metal powders for carbon containing castables
13. Speciation of the most soluble phases in a sequential extraction procedure adapted for geochemical studies of copper sulfide mine waste10.1016/S0375-6742(03)00182-1 ↗
14. Transformation of 2-line ferrihydrite to 6-line ferrihydrite under oxic and anoxic conditions10.2138/am-2003-11-1233 ↗
15. Compositionally tuned epitaxial cubic MgxZn1−xO on Si(100) for deep ultraviolet photodetectors10.1063/1.1576309 ↗
16. A high-speed photoconductive UV detector based on an Mg0.4Zn0.6O thin film10.1088/0268-1242/22/7/001 ↗
17. Effect of post annealing on the band gap of MgxZn1−xO thin films10.1088/0268-1242/23/3/035002 ↗
18. New additives in carbon-bonded refractories
19. Effects of Mg-B material addition to Al2O3–C SV plate
20. Synergetic effects of boron-based antioxidant combined with aluminium additive in magnesia–carbon refractories
21. Direct and indirect slag corrosion of oxide and oxide-c refractories