journal article·2003-01

Effect of substitution of quartz by rice husk ash and silica fume on the properties of whiteware compositions

C.S. Prasad, K.N. Maiti, R. Venugopal

Ceramics International· Volume 29· Issue 8
Publisher page

Abstract

Abstract Active silica from rice husk ash (RHA) and silica fume (SF) were progressively incorporated in a whiteware composition in substitution of quartz. The Influence of the addition on the thermo-mechanical properties, vitrification behavior and microstructure has been investigated. It has been found that replacement of quartz by RHA+ SF (1:1) reduced drastically both the maturing temperature (50–100 °C) and the thermal expansion (3.24–14.6%) at 600 °C with the improvement in the fired strength. Maximum improvement in the fired MOR (20.8%) was observed in a whiteware composition containing 10% (RHA+silica fume). On complete replacement of quartz (25%) by RHA+SF, the fired strength was noticed around 14.95% in whiteware body matured at lower temperature by 100 °C.The improvement in the properties is attributed to sharp changes in the microstructural features as a result of significant reduction in the content of the quartz phase and the simultaneous increase in glassy phase. The findings would be helpful to improve the properties of whiteware as well as to reduce the energy consumption during firing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. B.M. Agrawal, Utilization of rice husk ash, Trans. Indian Ceram. Soc. 36 (1–2).
2. Silicon in rice10.1021/jf60129a024 ↗
3. J.L. Martin, The Desilicification of Rice Hulls and a Study of the Products Obtained, MS Thesis, Louisiana State University, Eunice, LA, May 1938.
4. Crystallina silica in plants10.2307/2440905 ↗
5. D.F. Houston, Rice hulls, in: Rice Chemistry and Technology, American Association of Cereal Chemists, St. Paul, MN, 1972, pp. 301–352.
6. Alla-Laximikantham
7. Physico-chemical characteristic of silica from paddy husk, its reactivity and probably field of application
8. Effect of rice husk ash in whiteware composition10.1016/S0272-8842(01)00010-4 ↗
9. Ralph · 1979
10. Powder preparation for advanced ceramics
11. Effect of Silica Fume addition on the properties of whiteware compositions10.1016/S0272-8842(01)00051-7 ↗
12. Influence of the batch composition on the reaction behaviour of fast fired (2hrs) porcelain
13. Mechanical strength of porcelain10.1111/j.1151-2916.1957.tb12626.x ↗
14. Inexpensive high strength electrical porcelain
15. S.I. Warshaw, R.J. Seider, in: R.M. Fulrath, J.A. Pask (Eds.), Ceramic Microstructures, John Wiley and Sons, New York, 1968, p. 559.
16. Kingery · 1976
17. Effect of alumina addition on crystalline constituents and fired properties of electrical porcelain
18. L. Winnogradow, D. Kleinrock, M. Karp, in: Proc. 9th Conf. Silic, Ind. Budapest, 1968, p. 407.
19. Effect of substitution of quartz by beach sand sillimanite on the properties of conventional porcelain
20. De-Keyser · Ber/Dtsch Keram. Ges · 1963 · 49 · 304
21. Replacement of quartz and potash feldspar with sericitic pyrophyllite in whiteware composition
22. Thermal behaviour of whiteware bodies containing sericitic pyrophyllite
23. 1991
24. Using kyanite sillimanite concentrate for making high tension porcelain10.1007/BF00696179 ↗
26. Comparison of strength of triaxial porcelain containing alumina and silica10.1111/j.1151-2916.1967.tb15128.x ↗
27. Reaction between mullite and glassy phase in porcelain
28. Hamano · J. Ceram. Soc. Jpn. · 1991 · 99 · 149
29. Mattyaaasovszky-zsolvay · J. Am. Ceram. Soc. · 1957 · 40 · 29910.1111/j.1151-2916.1957.tb12626.x ↗
30. Weyl · Berichte Deu. Keram. Ges. · 1959 · 36 · 319
31. Palatzky · Silikattechnik · 1958 · 9 · 68
32. Study of high silica porcelain bodies
33. Effect of particle size on the vitrification temperature and fired properties of conventional white stoneware10.1080/0371750X.1989.10822962 ↗
34. Effect of glass-ceramics and sillimanite sand additions on microstructure and properties of porcelain10.1016/0272-8842(92)90073-M ↗