Preparation and structural evolution of SiOC preceramic aerogel during high-temperature treatment
Source abstract
Abstract
Abstract Silicon oxycarbide (SiOC) ceramic aerogels in mesopores range have been fabricated by pyrolyzing polycarbosilane aerogels in nitrogen (N 2 ) atmosphere. The reactants, poly(methylhydrosiloxane) and 2, 4, 6, 8-tetramethyl-2, 4, 6, 8-tetravinylcyclotetrasiloxane have been heated in the presence of hydrochloroplatinic acid. As-prepared SiOC preceramic aerogel has specific surface area of 299 m 2 /g at room temperature, and decomposes during pyrolysis. Structural evolution of the aerogels as a function of heat-treatment temperature has been investigated by Fourier transform infrared spectrophotometer, X-ray diffraction analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Results indicate that tetrahedral Si–O–C network underwent four structural changes during thermal treatment from room temperature to 1600 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Advanced ceramic materials synthesis · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Coherent expanded aerogels and jellies10.1038/127741a0 ↗
2. Aerogels: the world's lightest solids
3. Structure and reactivity of titania-supported oxides. Part 3: reaction of isopropanol over vanadia-titania catalysts10.1016/S0166-9834(00)80594-1 ↗
4. Aergoel10.1002/adma.19910031011 ↗
5. Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition10.1038/nmat3001 ↗
6. Carbon nanotube sponges10.1002/adma.200902986 ↗
7. Super-compressible foamlike carbon nanotube films
8. Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process10.1016/S0022-3093(05)80427-2 ↗
9. Heat-resistant, strong alumina-modified silica aerogels fabricated by impregnating silicon oxycarbide aerogel with boehmite sol10.1016/j.matdes.2017.06.036 ↗
10. Ultralight metallic microlattices10.1126/science.1211649 ↗
11. Ultralight multi-walled carbon nanotube aerogel10.1021/nn102246a ↗
12. Out-of-furnace oxidation of SiCN polymer-derived ceramic aerogel pyrolized at intermediate temperature (600-800°C)10.1016/j.jeurceramsoc.2015.10.038 ↗
13. Out-of-furnace oxidation of SiCN polymer-derived ceramic aerogel pyrolizated at intermediate temperature (600–800°C)
14. Novel polysiloxane and polycarbosilane aerogels via hydrosilylation of preceramic polymers10.1039/c2jm00020b ↗
15. Lithium insertion into dense and porous carbon-rich polymer-derived SiOC ceramics10.1016/j.jeurceramsoc.2012.03.010 ↗
16. Large size and low density SiOC aerogel monolith prepared from triethoxyvinylsilane/tetraethoxysilane10.1016/j.ceramint.2017.01.124 ↗
17. Synthesis of hierarchical porous silicon oxycarbide ceramics from preceramic polymer and wood biomass composites10.1016/j.jeurceramsoc.2013.08.004 ↗
18. Processing of silicon oxycarbide foams by steam chest molding and pyrolysis10.1111/j.1551-2916.2010.04087.x ↗
19. A simple pressing route to closed-cell microcellular ceramics10.1016/j.scriptamat.2005.06.032 ↗
20. Hierarchically ordered foams derived from polysiloxanes with catalytically active coatings10.1016/j.jeurceramsoc.2013.12.011 ↗
21. Effect of inert filler addition on pore size and porosity of closed-cell silicon oxycarbide foams10.1023/B:JMSC.0000026964.88284.ab ↗
22. Preparation and characterisation of SiOC ceramics made from a preceramic polymer and rice bran10.1016/j.jeurceramsoc.2012.11.027 ↗
23. Processing of porous silicon oxycarbide ceramics from extruded blends of polysiloxane and polymer microbead10.2109/jcersj.115.419 ↗
24. Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrificial microbeads10.1016/j.compscitech.2006.03.022 ↗
25. Ordered Mesoporous SiOC and SiCN ceramics from atmosphere-assisted in situ transformation10.1021/cm070283v ↗
26. Synthesis of ordered mesoporous silicon oxycarbide monoliths via preceramic polymer nanocasting10.1016/j.micromeso.2011.01.014 ↗
27. Preparation of micro-/mesoporous SiOC bulk ceramics10.1111/jace.13541 ↗
28. Polymer-derived nanoporous silicon carbide with monodisperse spherical pores10.1039/c2jm34799g ↗
29. Processing and thermal shock resistance of a polymer-derived MoSi2/SiCO ceramic composite10.1111/j.1551-2916.2005.00550.x ↗
30. Effect of pyrolysis temperature on the pore structure evolution of polysiloxane-derived ceramics10.1016/j.ceramint.2011.11.033 ↗
31. Influence of the polymer architecture on the high temperature behavior of SiCO glasses: a comparison between linear- and cyclic-derived precursors10.1016/j.jnoncrysol.2009.10.006 ↗
32. Polymer‐derived ceramics: 40 years of research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
33. Composite polymer derived ceramic system for oxidizing environments10.1007/s10853-006-0242-1 ↗
34. Preceramic polysiloxane networks obtained by hydrosilylation of 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane10.1016/j.saa.2010.08.056 ↗
35. New precursors to SiCO ceramics derived from linear poly(vinylsiloxanes) of regular chain composition10.1016/j.jeurceramsoc.2013.10.026 ↗
36. The development and stability of porosity formed during the pyrolysis of polyborodiphenylsiloxane10.1016/j.micromeso.2006.09.028 ↗
37. Pyrolyzed polysiloxane membranes with tailorable hydrophobicity, porosity and high specific surface area10.1016/j.micromeso.2012.10.014 ↗
38. Polymer-derived mesoporous SiOC/ZnO nanocomposite for the purification of water contaminated with organic dyes10.1016/j.micromeso.2011.10.015 ↗
39. Template-free synthesis of polymer-derived mesoporous SiOC/TiO2 and SiOC/N-doped TiO2 ceramic composites for application in the removal of organic dyes from contaminated water10.1016/j.apcatb.2011.12.036 ↗
40. High rate capability of SiOC ceramic aerogels with tailored porosity as anode materials for li-ion batteries10.1016/j.electacta.2015.01.088 ↗
41. Structural design of polymer‐derived SiOC Ceramic aerogels for high-rate li ion storage applications10.1111/jace.14323 ↗
42. Systematic Structural characterization of the high-temperature behavior of nearly stoichiometric silicon oxycarbide glasses10.1021/cm049847a ↗
43. Density gradients and sintered dimensional tolerance in compacts formed from spray-dried alumina10.1111/jace.13634 ↗
44. Carbon aerogels for electrochemical applications10.1016/S0022-3093(98)00011-8 ↗
45. Determination of nitrogen adsorption-desorption isotherms10.1021/ac60053a032 ↗
46. Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC Technical Report)10.1351/PAC-REP-10-11-19 ↗
47. Systematic structural characterization of the high-temperature behavior of nearly stoichiometric silicon oxycarbide glasses10.1021/cm049847a ↗
48. Fundamental understanding of water vapor effect on SiOC evolution during pyrolysis
49. PCCP perspectives on Raman spectroscopy of graphene-based systems: from the perfect two-dimensional surface to charcoal
50. High surface area porous carbons produced by steam activation of graphene aerogels10.1039/c4ta01387e ↗
51. Graphene-based nanoporous materials10.1002/adfm.200902323 ↗
52. Raman scattering in 6H SiC10.1103/PhysRev.173.787 ↗
53. Growth mechanism of poly(divinylbenzene) microspheres in precipitation polymerization10.1021/ma9812027 ↗