Laminated Object Manufacturing of in-situ synthesized MAX-phase composites
Source abstract
Abstract
Abstract In this work green tapes comprised of TiC and SiC were further processed by lamination, pyrolysis and liquid silicon infiltration. The in-situ synthesis of MAX phase Ti3SiC2 by silicon infiltration was investigated and discussed. The synthesis was supported by thermodynamic calculations. The mechanical and microstructural properties of the siliconized composites were studied. The processing route, in combination with Laminated Object Manufacturing (LOM) resulted in the successful fabrication of a three-dimensional gear. The gear showed a defect-free structure with a linear shrinkage of less than 3% relative to the green state. Thus, this approach can be considered as a near-net-shaping process of ceramic components with complex geometries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Additive Manufacturing and 3D Printing Technologies · Graphene and Nanomaterials Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Growth and characterization of MAX-phase thin films10.1016/j.surfcoat.2004.08.174 ↗
2. The MAX phases: unique new carbide and nitride materials-Ternary ceramics turn out to be surprisingly soft and machinable, yet also heat-tolerant, strong and lightweight10.1511/2001.28.736 ↗
3. Homoepitaxial growth of Ti–Si–C MAX-phase thin films on bulk Ti3SiC2 substrates10.1016/j.jcrysgro.2007.02.014 ↗
4. MAX phases: bridging the gap between metals and ceramics
5. Ti3Si(Al)C2-based ceramics fabricated by reactive melt infiltration with Al70Si30 alloy10.1016/j.jeurceramsoc.2013.11.020 ↗
6. Progress in research and development on MAX phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
7. Barsoum · 2013
8. Elastic and mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
9. Synthesis and high temperature mechanical properties of Ti3SiC2/SiC composite10.1007/BF01209221 ↗
10. New ceramics based on Ti3SiC210.1016/0272-8842(93)90052-S ↗
11. In-situ hot pressing/solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics10.1007/s100190050076 ↗
12. SHS of Ti3SiC2: ignition temperature depression by mechanical activation10.1016/j.jeurceramsoc.2004.11.021 ↗
13. Kero · 2007
14. Temperature fluctuation/hot pressing synthesis of Ti3SiC210.1023/A:1004848705481 ↗
15. Synthesis and some properties of Ti3SiC2 by hot pressing of titanium, silicon, and carbon powders. Part 1–effect of starting composition on formation of Ti3SiC2 and observation of Ti3SiC2 crystal morphology10.1179/026708303225006079 ↗
16. Safety-related problems in the titanium industry in the last 50 years10.1007/s11837-000-0024-1 ↗
17. Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders10.1016/S0955-2219(02)00044-4 ↗
18. Synthesis of Ti3SiC2SiC and TiSi2SiC composites using displacement reactions in the Ti-Si-C system10.1016/1359-6462(95)00663-X ↗
19. The MN+1AXN phases: a new class of solids: thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
20. Processing and mechanical properties of Ti3SiC2: I, reaction path and microstructure evolution10.1111/j.1151-2916.1999.tb02166.x ↗
21. Preparation of Ti3SiC210.1134/S0020168506030071 ↗
22. Intermediate phases in Ti3SiC2 synthesis from Ti/SiC/C mixtures studied by time‐resolved neutron diffraction10.1111/j.1151-2916.2002.tb00584.x ↗
23. Fabrication of monolithic Ti3SiC2 ceramic through reactive sintering of Ti/Si/2TiC10.1023/A:1021865613357 ↗
24. On physical and thermochemical properties of high-purity Ti3SiC210.1016/S0167-577X(01)00620-6 ↗
25. Synthesis of Ti3SiC2 powder from 1Ti/(1+x) Si/2TiC powder mixtures10.1016/j.jallcom.2003.07.019 ↗
26. Effect of the amounts of silicon on the in situ synthesis of Ti3SiC2 based composites made from TiC/Si powder mixtures10.1016/j.ceramint.2009.07.029 ↗
27. Synthesis of the Ti3SiC2 by solid state reaction below melting temperature of Si10.1016/j.jallcom.2004.08.089 ↗
28. Synthesis and some properties of Ti3SiC2 by hot pressing of Ti, Si and C powders Part 2–Mechanical and other properties of Ti3SiC210.1179/174328405X58841 ↗
29. Synthesis and high-temperature stability of Ti3SiC210.1016/S0925-8388(99)00003-1 ↗
30. Synthesis of Ti3SiC2 powders: reaction mechanism10.1111/j.1551-2916.2007.01501.x ↗
31. In situ synthesis of Ti3SiC2/SiC composite by displacement reaction of Si and TiC10.1016/j.msea.2004.03.046 ↗
32. Ceramic tape casting: a review of current methods and trends with emphasis on rheological behaviour and flow analysis10.1016/j.mseb.2016.07.011 ↗
33. Additive manufacturing of ceramic-based materials10.1002/adem.201400097 ↗
34. Laminated object manufacturing of preceramic‐paper‐derived Si? SiC composites10.1002/adma.200700789 ↗
35. Laminated object manufacturing (LOM) of SiSiC composites10.1002/adem.200400112 ↗
36. Colloidal processing of glass–ceramics for laminated object manufacturing10.1111/j.1551-2916.2009.03035.x ↗
37. Interpenetrating Al2O3-TiAl3 alloys produced by reactive infiltration10.1016/S0955-2219(99)00133-8 ↗
38. In situ processing of dense Al2O3–Ti aluminide interpenetrating phase composites10.1016/S0955-2219(01)00396-X ↗
39. Near-net-shape fabrication of Ti3AlC2-based composites10.1111/j.1744-7402.2007.02123.x ↗
40. Mechanical properties of Al2O3Si composites fabricated by pressureless infiltration technique10.1016/S0167-577X(97)00068-2 ↗
41. Processing of ceramic–metal composites10.1179/1743676111Y.0000000073 ↗
42. Three-dimensional printing of SiSiC lattice truss structures10.1016/j.msea.2012.09.107 ↗
43. Progress in novel and unexpected areas10.1016/j.mattod.2016.11.001 ↗
44. Robocasting of structural ceramic parts with hydrogel inks10.1016/j.jeurceramsoc.2016.03.001 ↗
45. Laminated object manufacturing of LZSA glass-ceramics10.1108/13552541111184152 ↗
46. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
47. Robocasting of carbon-alumina core-shell composites using co-extrusion10.1108/RPJ-12-2015-0191 ↗
48. Micro-scale plastic deformation of polycrystalline Ti3SiC2 under room-temperature compression10.1016/S0955-2219(00)00310-1 ↗
49. Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures10.1016/S1359-6454(01)00011-8 ↗
50. D.E. Bray, Proceedings of the 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures A [-B], 20–24 January 1998, Cocoa Beach, Florida, American Ceramic Society, 1998.
51. Experimental investigation and thermodynamic calculation of the titanium–silicon–carbon system10.1111/j.1151-2916.2000.tb01170.x ↗
52. Reaction kinetics in Ti3SiC2 synthesis studied by time-resolved neutron diffraction10.1016/j.jeurceramsoc.2004.09.005 ↗
53. Barin · 1997
54. L.V. Gurvich, I. Veyts, C.B. Alcock, Thermodynamic Properties of Individual Substances: Elements O, H (D, T), F, Cl, Br, I, He, Ne, Ar, Kr, Xe, Rn, S, N, P and their Compounds. Pt. 1. Methods and Computation. Pt. 2. Tables, Hemisphere, 1989.
55. IVTANTHERMO—a thermodynamic database and software system for the personal computer
56. Current status in layered ternary carbide Ti3SiC2, a review10.1016/j.jmst.2018.09.005 ↗