journal article·2015-12

Synthesis of In2O3 hollow nanofibers and their application in highly sensitive detection of acetone

Xishuang Liang, Guixin Jin, Fangmeng Liu, Xiaoshui Zhang, Shenshuang An, Jian Ma, Geyu Lu

Ceramics International· Volume 41· Issue 10
Publisher page

Abstract

Abstract In this study, indium oxide (In2O3) hollow nanofibers were synthesized through a two-step process. In2O3 solid nanofibers were prepared by electrospinning, and 10% HNO3 was used to corrode these nanofibers to obtain In2O3 hollow nanofibers. Moreover, the effects of corrosion on the morphology and acetone-sensing properties of In2O3 nanofibers were investigated. In2O3 nanofibers that were corroded for 2 h displayed hollow structures and exhibited a high response (resistance ratio) of 151 to 5 ppm of acetone at 300 °C. The minimum detection limit was 20 ppb. The hollow In2O3 nanofibers also exhibited high selectivity to acetone along with negligible cross-responses to interference gases at 300 °C, These gases include NO2, H2, CO, benzene, p-xylene, and toluene. The strong response to acetone was attributed to the enhanced accessibility of gas for gas-sensing reactions due to the hollow morphology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Enhanced acetone response in co-precipitated WO3 nanostructures upon indium doping10.1016/j.snb.2014.11.138 ↗
2. Ferroelectric WO3 nanoparticles for acetone selective detection10.1021/cm800761e ↗
3. Rapid and selective detection of acetone using hierarchical ZnO gassensor for hazardous odor markers application10.1016/j.jhazmat.2014.05.044 ↗
4. Breath acetone monitoring by portable Si: WO3 gas sensors10.1016/j.aca.2012.06.002 ↗
5. Determination of acetone inhuman breath by gas chromatography–mass spectrometry and solid-phase microextraction with on-fiber derivatization10.1016/S1570-0232(04)00657-9 ↗
6. Acetone gas sensors based on graphene-ZnFe2O4 composite prepared by solvothermal method10.1016/j.snb.2013.06.065 ↗
7. Aqueous chemical route deposition of nanocrystalline ZnO thin films as acetone sensor: effect of molarity10.1016/j.ceramint.2012.05.099 ↗
8. Acetone sensing of Au and Pd-decorated WO3 nanorod sensors10.1016/j.snb.2014.11.106 ↗
9. Enhanced acetone sensing performances of hierarchical hollow Au-loaded NiO hybrid structures10.1016/j.snb.2011.10.005 ↗
10. Excellent acetone sensing properties of Sm-doped α-Fe2O310.1016/j.apsusc.2014.06.169 ↗
11. Highly sensitive ZnO nanowire acetone vapor sensor With Au adsorption10.1109/TNANO.2008.2005917 ↗
12. Selective detection of acetone and gasoline by temperature modulation in zinc oxide nanosheets sensors10.1016/j.ssi.2010.05.058 ↗
13. Improved acetone sensing properties of ZnO hollow nanofibers by single capillary electrospinning10.1016/j.snb.2011.08.059 ↗
14. Synthesis of TiO2 hollow nanofibers by co-axial electrospinning and its superior lithium storage capability in full-cell assembly with olivine phosphate10.1039/c3nr01128c ↗
15. Ultrasensitive and ultraselective detection of H2S using electrospun CuO-loaded In2O3 nanofiber sensors assisted by pulse heating10.1016/j.snb.2014.11.130 ↗
16. H2S sensing performance of electrospun CuO-loaded SnO2 nanofibers10.1016/j.snb.2012.02.054 ↗
17. Highly sensitive SnO2 hollow nanofiber-based NO2 gas sensors10.1016/j.snb.2011.07.035 ↗
18. Improved acetone sensing properties of ZnO hollow nanofibers by single capillary electrospinning10.1016/j.snb.2011.08.059 ↗
19. Formation mechanism of porous hollow SnO2 nanofibers prepared by one-step electrospinning10.3144/expresspolymlett.2012.18 ↗
20. Gas sensors using hierarchical and hollow oxide nanostructures: overview10.1016/j.snb.2009.04.026 ↗
21. Nanowire-based sensors10.1002/smll.201000972 ↗
22. A synthesis and sensing application of hollow ZnO nanofibers with uniform wall thicknesses grown using polymer templates10.1088/0957-4484/21/47/475601 ↗
23. Design of selective gas sensors using electrospun Pd-doped SnO2 hollow nanofibers10.1016/j.snb.2010.07.013 ↗
24. 1D hollow a-Fe2O3 electrospun nanofibers as high performance anode material for lithium ion batteries10.1039/c2jm32989a ↗
25. Synthesis and H2 sensing properties of aligned ZnO nanotubes10.1016/j.apsusc.2010.09.085 ↗
26. SnO2 encapsulated TiO2 hollow nanofibers as anode material for lithium ion batteries10.1016/j.elecom.2012.05.034 ↗
27. ZnO hollow nanofibers: fabrication from facile single capillary electrospinning and applications in gas sensors10.1021/jp9070373 ↗
28. Direct annealing of electrospun synthesized highperformance porous SnO2 hollow nanofibers for gas sensors10.1039/c3ra41032c ↗
29. CuO nanowire gas sensors for air quality control in automotive cabin10.1016/j.snb.2008.08.026 ↗
30. Indium doped zinc oxide thin films obtained by electrodeposition10.1016/j.tsf.2005.04.042 ↗
31. Depth-profiling study on amorphous indium–gallium–zinc oxidethin-film transistors by X-ray photoelectron spectroscopy10.7567/JJAP.52.03BB03 ↗
32. Preparation and gas sensing properties of hierarchical flower-like In2O3 microspheres10.1016/j.snb.2012.10.091 ↗
33. Enhanced acetone response in co-precipitated WO3 nanostructuresupon indium doping10.1016/j.snb.2014.11.138 ↗
34. Zinc oxide thin film gas sensor for detection of acetone10.1007/s10853-005-0738-0 ↗
35. Theoretical approach to the gas response of oxide semiconductor film devices under control of gas diffusion and reaction effects10.1016/j.snb.2010.01.018 ↗
36. Toward innovations of gas sensor technology10.1016/j.snb.2004.12.075 ↗
37. Synthesis and high gas sensitivity of tin oxide nanotubes10.1016/j.snb.2007.11.032 ↗
38. Chemical sensing and catalysis by one-dimensional metal-oxide nanostructures10.1146/annurev.matsci.34.040203.112141 ↗
39. Design of selective gas sensors using electrospun Pd-doped SnO2 hollow nanofibers10.1016/j.snb.2010.07.013 ↗
40. Illuminating CO2 reduction on frustrated Lewis pair surfaces: investigating the role of surface hydroxides and oxygen vacancies on nanocrystalline In2O3−x(OH)y10.1039/C5CP02613J ↗
41. Mesoporous In2O3 with enhanced acetone gas-sensing property10.1016/j.matlet.2014.01.114 ↗
42. Template synthesis, organic gas-sensing and optical properties of hollow and porous In2O3 nanospheres10.1088/0957-4484/19/34/345704 ↗
43. Enhanced C2H5OH sensing characteristics of nano-porous In2O3 hollow spheres prepared by sucrose- mediated hydrothermal reaction10.1016/j.snb.2010.12.055 ↗
44. Synthesis, characterization and alcohol-sensing properties of rare earth doped In2O3 hollow spheres10.1016/j.snb.2012.12.024 ↗
45. Preparation, characterization and acetone sensing properties of Ce-doped SnO2 hollow spheres10.1016/j.snb.2012.07.115 ↗
46. Synthesis of hollow SnO2 nanobelts and their application in acetone sensor10.1016/j.matlet.2014.06.112 ↗
47. Highly sensitive and selective acetone sensor based on C-doped WO3 for potential diagnosis of diabetes mellitus10.1016/j.snb.2014.04.015 ↗
48. Rh-catalyzed WO3 with anomalous humidity dependence of gas sensing characteristics10.1039/C4RA06654E ↗
49. Template-free to fabricate highly sensitive and selective acetone gas sensor based on WO3 microspheres10.1016/j.vacuum.2013.02.005 ↗
50. Tungsten trioxide nanotubes with high sensitive and selective properties to acetone10.1016/j.snb.2013.12.078 ↗
51. WO3 nanocrystals: synthesis and application in highly sensitive detection of acetone10.1016/j.snb.2011.02.047 ↗
52. Growth and selective acetone detection based on ZnO nanorod arrays10.1016/j.snb.2009.08.053 ↗
53. Selective acetone sensor based on dumbbell-like ZnO with rapid response and recovery10.1016/j.snb.2008.04.024 ↗
54. Synthesis, characterization and acetone-sensing properties of bristlegrass-like ZnO nanostructure10.1016/j.ceramint.2014.08.136 ↗
55. Template-free hydrothermal synthesis of ZnO micro/nano-materials and their application in acetone sensing properties10.1016/j.spmi.2014.10.033 ↗
56. High sensing properties of Ce-doped α-Fe2O3 nanotubes to acetone10.1016/j.ceramint.2013.08.011 ↗
57. Highly sensitive acetone sensors based on La-doped α-Fe2O3 nanotubes10.1016/j.snb.2013.04.088 ↗
58. Pure and Pt-loaded gamma iron oxide as sensor for detection of sub ppm level of acetone10.1016/j.snb.2011.03.047 ↗
59. Influence of Sb doping on the structural, optical, electrical and acetone sensing properties of In2O3 thin films10.1016/j.ceramint.2013.09.084 ↗