Effect of tungsten carbide, silicon carbide and graphite particulates on the mechanical and microstructural characteristics of AA 5052 hybrid composites

Abstract Reinforced aluminium metal matrix composite materials are being used extensively in diverse fields that include aerospace and automobile. In this investigation, we introduce two distinct and novel types of aluminium hybrid composites and characterize their mechanical properties and microstructure. The first type was fabricated by reinforcing aluminium alloy (AA 5052) with tungsten carbide (WC) and graphite particulates and the second type was fabricated by reinforcing AA 5052 with silicon carbide (SiC) and graphite particulates. The composite material was processed through the melt-stir casting method and characterized by analyzing their densities, micro hardness, Charpy impact strength, tensile strength and peak elongation. Melt-stir casting method was chosen due to its cost effectiveness and productivity. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) studies were conducted to analyze thorough mixing of the reinforcements in the aluminium matrix metal. It was found that addition of tungsten carbide and graphite particulates with AA 5052 resulted in an increase in micro hardness and Charpy impact strength by 10.3% and 34.2% respectively, which are found to be better when compared to that of adding SiC and graphite particulates with AA 5052. Moreover, tensile tests revealed that there was a drop in tensile strength for the Al/SiC/graphite composites, while the peak elongation increases for both composites. On the other hand, while adding WC and graphite particulates the tensile strength of the composite improved by 15.12%. Also, the SEM fractographs taken for Al/SiC/graphite composite samples, subjected to Charpy impact and tensile tests revealed the presence of particle fractures and cracks and confirmed the possibility of plastic deformation. The results showed the Al/WC/graphite composites to be the superior among the two fabricated composites in terms of mechanical properties and therefore have good potential for structural applications.