Highly porous fibrous mullite ceramic membrane with interconnected pores for high performance dust removal
Source abstract
Abstract
Abstract Porous fibrous mullite ceramic membranes with different content of fibers were successfully fabricated by molding method for dust removal. The properties of the samples, such as microstructure, porosity, bulk density and mechanical behavior were analyzed. Owing to the highly porous three-dimensional structure of ceramic membranes, all the samples exhibited low density (lower than 0.64 g/cm3), high porosity (higher than 73%), low linear shrinkage (lower than 1.0%) and low thermal conductivity (lower than 0.165 W/mK). Significantly, the as-prepared porous ceramic membrane possessed of enhanced dust removal efficiency with almost 100% for 3–10 µm, 97% for 1.0 µm, 87% for 0.5 µm and 82% for 0.3 µm dust particles in diameter from dust-laden air passed through the test module. Moreover, the pressure drop was lower than 80 Pa when the airflow linear velocity reached 1.25 m min−1. The results indicated that the ceramic membranes prepared in this work were promising high efficiency dedusting materials for the application in gas filtration field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · Air Quality and Health Impacts · Infection Control and Ventilation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Chemical characteristics and source apportionment of PM2.5 in Lanzhou, China10.1016/j.scitotenv.2017.06.050 ↗
2. Source apportionment of PM2.5 pollution in an industrial city in southern China10.1016/j.apr.2017.05.001 ↗
3. Impacts of coal burning on ambient PM2.5 pollution in China10.5194/acp-17-4477-2017 ↗
4. Chemical composition and source apportionment of ambient PM2.5 during the non-heating period in Taian, China10.1016/j.atmosres.2015.11.002 ↗
5. A review on the human health impact of airborne particulate matter10.1016/j.envint.2014.10.005 ↗
6. Transparent air filter for high-efficiency PM2.5 capture10.1038/ncomms7205 ↗
7. Chatterjee, A review on the fuel gas cleaning technologies in gasification process10.1016/j.jece.2015.02.011 ↗
8. Source apportionment and a novel approach of estimating regional contributions to ambient PM2.5 in Haikou, China10.1016/j.envpol.2017.01.030 ↗
9. Effect of 3D fiber orientation distribution on transverse air permeability of fibrous porous media10.1016/j.powtec.2011.12.027 ↗
10. Impact of mineral dust on nitrate, sulfate, and ozone in transpacific Asian pollution plumes10.5194/acp-10-3999-2010 ↗
11. Burden of disease from rising coal-fired power plant emissions in Southeast Asia10.1021/acs.est.6b03731 ↗
12. Experimental investigation of deposition and removal of particles during gas filtration with various fabric filters10.1016/j.seppur.2011.04.031 ↗
13. Filtration performance characteristics of ceramic candle filter based on inlet structure of high-temperature and high-pressure dust collectors10.1016/j.jiec.2014.09.004 ↗
14. Clean coal technology for removal dust using moving granular bed filter10.1016/j.energy.2016.11.093 ↗
15. Three-dimensional porous silica ceramics with tailored uniform pores: prepared by inactive spheres10.1016/j.jeurceramsoc.2015.06.020 ↗
16. Preparation and characterization of low cost ceramic membranes for micro-filtration applications10.1016/j.clay.2007.12.001 ↗
17. Preparation and characterization of tubular supported ceramic microfiltration membranes from fly ash10.1016/j.seppur.2011.06.014 ↗
18. Preparation and characterization of novel ceramic membranes for micro-filtration applications10.1016/j.ceramint.2016.06.125 ↗
19. Controllable synthesis of hierarchical porous mullite fiber network for gas filtration10.1016/j.jeurceramsoc.2016.01.037 ↗
20. Effect of binder types on the properties of the mullite fibrous ceramics prepared by TBA-based gel-casting method10.1016/j.ceramint.2016.09.143 ↗
21. Mechanical behavior of fibrous ceramics with a bird's nest structure10.1016/j.compscitech.2014.06.001 ↗
22. Thermal and mechanical properties of fibrous zirconia ceramics with ultra-high porosity10.1016/j.ceramint.2014.04.008 ↗
23. Effect of temperature on the mechanical behavior of mullite fibrous ceramics with a 3D skeleton structure prepared by molding method10.1016/j.matdes.2015.11.043 ↗
24. Porous mullite ceramics with low thermal conductivity prepared by foaming and starch consolidation10.1007/s10934-013-9741-z ↗
25. Carbon dioxide capture using a superhydrophobic ceramic hollow fibre membrane for gas-liquid contacting process10.1016/j.jclepro.2016.07.015 ↗
26. Preparation and characterization of a Robust and hydrophobic ceramic membrane via an improved surface grafting technique10.1021/ie801639d ↗
27. Experimental study on the performance and long-term stability of PVDF/montmorillonite hollow fiber mixed matrix membranes for CO2 separation process10.1016/j.ijggc.2014.04.021 ↗