journal article·2016-05

Effect of GDC interlayer thickness on durability of solid oxide fuel cell cathode

Muhammad Zubair Khan, Muhammad Taqi Mehran, Rak-Hyun Song, Jong-Won Lee, Seung-Bok Lee, Tak-Hyoung Lim, Seok-Joo Park

Ceramics International· Volume 42· Issue 6
Publisher page

Abstract

Abstract Long-term performance degradation of solid oxide fuel cell (SOFC) cathode as a function of gadolinium doped ceria (GDC) interlayer thickness has been studied under accelerated operating conditions. For this purpose, SOFC half-cells with GDC interlayer thicknesses of 2.4, 3.4 and 6.0 µm were fabricated and tested for 1000 h at 900 °C under constant current density of 1 A/cm 2 . The half-cells consisted of lanthanum strontium cobalt ferrite (LSCF)/GDC composite cathode, GDC interlayer, scandia-ceria stabilized zirconia electrolyte and platinum anode as a counter electrode. Area specific resistance (ASR) of the half-cells was continuously measured over time. Higher increase in ASR was observed for the half-cells with GDC interlayer thickness of 2.4 and 6.0 µm, which is attributed to higher strontium (Sr) diffusion towards electrolyte and to cathode/GDC interface delamination coupled with small Sr diffusion, respectively. However, half-cell with GDC interlayer thickness of 3.4 µm showed smaller degradation rate due to highly dense GDC interlayer which had less interfacial resistance and suppressed Sr diffusion towards electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes10.1016/j.ssi.2004.06.017 ↗
2. Conceptual study of a 250kW planar SOFC system for CHP application10.1016/j.jpowsour.2004.01.025 ↗
3. Degradation of anode supported SOFCs as a function of temperature and current load10.1149/1.2193400 ↗
4. High Temperature Solid Oxide Fuel Cells
5. Accelerated degradation tests: modeling and analysis
6. Cathode materials for reduced-temperature SOFCs10.1149/1.1617300 ↗
7. Low temperature anode-supported solid oxide fuel cells based on gadolinium doped ceria electrolytes10.1016/j.jpowsour.2007.01.039 ↗
8. Fabrication and performance of gadolinia-doped ceria-based intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2007.11.113 ↗
9. Nanostructured ceria based thin films (≤1µm) As cathode/electrolyte interfaces10.1016/j.jssc.2012.08.021 ↗
10. Ceramic ion conducting membranes10.1016/S1359-0286(96)80052-0 ↗
11. Effect of unsintered gadolinium-doped ceria buffer layer on performance of metal-supported solid oxide fuel cells using unsintered barium strontium cobalt ferrite cathode10.1016/j.jpowsour.2010.03.095 ↗
12. Effect of fabrication parameters on coating properties of tubular solid oxide fuel cell electrolyte prepared by vacuum slurry coating10.1016/j.jpowsour.2009.10.054 ↗
13. SOFCs with Sc-doped zirconia electrolyte and co-containing perovskite cathodes10.1149/1.2712131 ↗
14. Effect of GDC interlayer on the degradation of solid oxide fuel cell cathode during accelerated current load cycling10.1016/j.ijhydene.2014.07.022 ↗
15. Macroscale modeling of cathode formation in SOFC10.1016/j.ssi.2004.05.031 ↗
16. Effects of GDC interlayer on performance of low-temperature SOFCs10.1016/j.jpowsour.2007.09.019 ↗
17. Degradation mechanisms of La–Sr–Co–Fe–O3 SOFC cathodes10.1149/1.2266160 ↗
18. Application of FIB-TOF-SIMS and FIB-SEM-EDX methods for the analysis of element mobility in solid oxide10.1149/05701.0581ecst ↗
19. Observation of structural change induced by cathodic polarization on (La, Sr) MnO3 electrodes of solid oxide fuel cells10.1016/S0167-2738(02)00760-9 ↗
20. A chemical diffusion-controlled electrode reaction at the compact La1−x SrMnO3/Stabilized zirconia interface in oxygen atmospheres10.1149/1.1837165 ↗
21. Intermediate temperature solid oxide fuel cell using (La,Sr)(Co,Fe)O3-based cathodes10.1016/j.ssi.2006.07.049 ↗
22. DiGiuseppe G, Licon GM. A modeling study of the effect of cathode delamination on SOFC performance. In: Proceedings of the 6th International Fuel Cell Science Engineering and Technical Conference, Colorado, USA; June 16–18. DOI: 10.1115/FuelCell2008-65030.10.1115/FuelCell2008-65030 ↗
23. Fast performance degradation of SOFC caused by cathode delamination in long-term testing10.1016/j.ijhydene.2010.05.005 ↗