An alternative method for manufacturing Al/B4C/SiC hybrid composite strips by cross accumulative roll bonding (CARB) process
Source abstract
Abstract
Abstract For the first time, the cross accumulative roll bonding (CARB) process was used as an effective alternative method for manufacturing Al/B 4 C/SiC hybrid composite strips and compared with the accumulative roll bonding (ARB) processed hybrid composite. The XRD results showed that nanostructured Al/B 4 C/SiC hybrid composites have successfully been fabricated by using CARB process without any additional phase. During CARB, the ceramic reinforcement particles (B 4 C and SiC) were more uniformly dispersed within the matrix compared with ARB process, due to changes in strain path. In addition, the tensile strength, elongation, and microhardness of CARB composites were measured to be higher than those in the ARB product. Finally, scanning electron microscopy (SEM) observations of fractured surfaces showed that fracture mode both hybrid composites was shear ductile rupture, dimples, and shear zones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Prediction of tensile strength of friction stir welded aluminium matrix TiCp particulate reinforced composite10.1016/j.matdes.2010.05.055 ↗
2. Investigation on mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal–matrix composites10.1016/j.ceramint.2012.08.057 ↗
3. Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements10.1016/j.msea.2013.02.041 ↗
4. Characterization of severely deformed new composites fabricated by powder metallurgy including a stage of mechanical alloying10.1016/j.jallcom.2014.08.031 ↗
5. Wear performance of Al–SiC–B4C hybrid composites under dry sliding conditions10.1016/j.matdes.2012.11.059 ↗
6. Microstructure and mechanical properties of Al/SiO2 composite produced by CAR process10.1016/j.msea.2011.10.091 ↗
7. Novel ultra-high straining process for bulk materials development of the accumulative roll bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
8. Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding10.1016/j.msea.2010.03.070 ↗
9. High strain rate superplasticity in a nano-structured Al–Mg/SiCP composite severely deformed by equal channel angular extrusion10.1016/j.matdes.2012.02.009 ↗
10. Evaluation of mechanical behavior of nano-grained 2024 Al alloy during high pressure torsion (HPT) process at various temperatures10.1016/j.msea.2011.12.064 ↗
11. Influence of twist extrusion process on microstructure and mechanical properties of 6063 aluminum alloy10.1016/j.matdes.2011.12.009 ↗
12. Processing of ultrafine-grained aluminum by cross accumulative roll-bonding10.1016/j.msea.2013.11.060 ↗
13. Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties10.1016/j.msea.2013.07.075 ↗
14. Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process10.1016/j.matdes.2013.06.064 ↗
15. Hybrid composites produced by anodizing and accumulative roll bonding (ARB) processes10.1016/j.ceramint.2014.02.102 ↗
16. Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation10.1016/j.ceramint.2014.11.079 ↗
17. Fabrication of nanostructure Al/SiCP composite by accumulative roll-bonding (ARB) process10.1016/j.jallcom.2009.12.026 ↗
18. Wear behavior of nanostructured Al/Al2O3 composite fabricated via accumulative roll bonding (ARB) process10.1016/j.matdes.2014.03.027 ↗
19. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
20. ASTM B328-96(2003), Standard test method for density, oil content and interconnected porosity of sintered metal structural parts and oil-impregnated bearings, ASTM International, Philadelphia, USA, 2004.
21. ASTM E8M. Standard test methods for tension testing of metallic materials, ASTM International, Philadelphia, USA, 1989.
22. Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process10.1016/j.compositesb.2012.04.069 ↗
23. Comparison of microstructural and mechanical properties of Al–TiC, Al–B4C and Al–TiC–B4C composites prepared by casting techniques10.1016/j.msea.2012.09.068 ↗
24. Microstructures and mechanical properties of a two-layer B4C/Al–B4C/TiB2 composite10.1016/j.msea.2012.09.014 ↗
25. Investigation of nanostructured Al/Al2O3 composite produced by accumulative roll bonding process10.1016/j.matdes.2011.09.040 ↗
26. Pressure welding by rolling
27. Microstructural evolution during accumulative roll bonding of commercial purity aluminum10.1016/S0921-5093(02)00182-X ↗
28. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗