Investigation of functionally graded HA-TiO2 coating on Ti–6Al–4V substrate fabricated by sol-gel method
Source abstract
Abstract
Abstract In this study, functionally graded hydroxyapatite-titanium dioxide coating (FGC HA-TiO2), with bottom-up composition: 100% TiO2, 50% TiO2 -50% HA, 100% HA, was produced by sol-gel method on the Ti–6Al–4V alloy substrate. The XRD, FTIR and XRF results signified heat treatment of each coating's layer at 450 °C leads to desired phase achievement. The coherence, strength and scratch resistance of FGC HA-TiO2 in comparison with control samples namely; single-layer HA and double-layer HA-TiO2 coatings, were assessed by cross-sectional SEM images and nano-scratch test. According to the results, the insertion of the TiO2 layer improves the bonding strength of the coating to the substrate and grading the coating composition plays an essential role in upgrading the integrity and coherency of the coating. The contribution of the TiO2 intermediate layer and composition gradient on developing coating strength was 22% and 36%, respectively. The immersion test in the simulated body fluid (SBF) suggested bioactivity of the Ti–6Al–4V substrate enhances by coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials10.1016/j.ceramint.2017.10.162 ↗
2. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
3. Orthopedic biomaterials
4. Biomaterial surface modification of titanium and titanium alloys for medical applications
5. Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis–A review10.1016/j.actbio.2013.10.036 ↗
6. Functional coatings or films for hard-tissue applications10.3390/ma3073994 ↗
7. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: a review paper10.1016/j.ijadhadh.2013.09.030 ↗
8. Characterization of hydroxyapatite coatings deposited by hydrothermal electrochemical method on NaOH immersed Ti6Al4V10.1016/j.jallcom.2016.02.173 ↗
9. HA coating fabricated by electrochemical deposition on modified Ti6Al4V alloy10.1016/j.surfcoat.2016.07.005 ↗
10. Hydroxyapatite coating on Ti6Al4V alloy using a sol–gel derived precursor10.1016/S0254-0584(01)00474-6 ↗
11. Effect of cyclic precalcification of nanotubular TiO2 layer on the bioactivity of titanium implant10.1155/2013/293627 ↗
12. Post-spray hot isostatic pressing of plasma sprayed Ti-6Al-4V/hydroxyapatite composite coatings10.1016/S0924-0136(97)00086-1 ↗
13. Bonding strength of fluoridated hydroxyapatite coatings: a comparative study on pull-out and scratch analysis10.1016/j.tsf.2009.03.122 ↗
14. Mechanical properties of TiO2-hydroxyapatite nanostructured coatings on Ti-6Al-4V substrates by APS method10.1007/s12613-013-0742-3 ↗
15. A review of hydroxyapatite coatings manufactured by thermal spray
16. Hydroxyapatite and titania sol–gel composite coatings on titanium for hard tissue implants; mechanical and in vitro biological performance10.1002/jbm.b.30073 ↗
17. Electrophoretic deposition of nanocrystalline hydroxyapatite on Ti6Al4V/TiO2 substrate10.1007/s11998-012-9438-2 ↗
18. Hydroxyapatite/titania sol–gel coatings on titanium–zirconium alloy for biomedical applications10.1016/j.actbio.2006.10.004 ↗
19. Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method10.1016/j.biomaterials.2003.09.041 ↗
20. Biocompatibility and corrosion protection behaviour of hydroxyapatite sol-gel-derived coatings on Ti6Al4V alloy10.3390/ma10020094 ↗
21. Sol-gel derived porous and hydrophilic calcium hydroxyapatite coating on modified titanium substrate10.1016/j.surfcoat.2016.10.032 ↗
22. Enhancing surface characteristics of Ti–6Al–4V for bio-implants using integrated anodization and thermal oxidation10.1039/c3tb21731k ↗
23. Goto · 2011
24. Functionally graded materials for orthopedic applications–an update on design and manufacturing10.1016/j.biotechadv.2015.12.013 ↗
25. Functionally graded bioactive coatings of hydroxyapatite/titanium oxide composite system10.1016/S0167-577X(01)00635-8 ↗
26. Plasma spraying of functionally graded hydroxyapatite/Ti–6Al–4V coatings10.1016/S0257-8972(03)00238-X ↗
27. Thermal spraying of functionally graded calcium phosphate coatings for biomedical implants10.1007/s11666-006-5003-9 ↗
28. In vitro behaviour of titania–hydroxyapatite functionally graded coatings10.1179/174367608X319285 ↗
29. Production and characterization of plasma-sprayed TiO2–hydroxyapatite functionally graded coatings10.1016/j.jeurceramsoc.2008.02.026 ↗
30. Microstructure of suspension plasma sprayed multilayer coatings of hydroxyapatite and titanium oxide10.1016/j.surfcoat.2007.02.013 ↗
31. Fabrication and characterization of functionally graded hydroxyapatite/TiO2 multilayer coating on Ti–6Al–4V titanium alloy for biomedical applications10.1016/j.ceramint.2015.06.098 ↗
32. Electrochemical and structural evaluation of functionally graded bioglass-apatite composites electrophoretically deposited onto Ti6Al4V alloy10.1016/j.electacta.2008.08.055 ↗
33. Bioactive glass–apatite composite coating for titanium implant synthesized by electrophoretic deposition10.1016/j.jeurceramsoc.2006.04.111 ↗
34. A functionally graded titanium/hydroxyapatite film obtained by sputtering10.1023/A:1014002732373 ↗
35. Nanocomposited and functionally graded ZrN/HA coatings on cp-Ti by RF magnetron sputtering
36. Laser coating of multi layer Hydroxyapatite on titanium alloy
37. Surface characterization and osteoblast response to a functionally graded hydroxyapatite/fluoro-hydroxyapatite/titanium oxide coating on titanium surface by sol–gel method10.1111/cpr.12105 ↗
38. The influence of titania/hydroxyapatite composite coatings on in vitro osteoblasts behaviour10.1016/S0142-9612(00)00269-6 ↗
39. Sol–gel based materials for biomedical applications10.1016/j.pmatsci.2015.12.001 ↗
40. Bala · 2014
41. Review of sol-gel thin film formation10.1016/S0022-3093(05)80653-2 ↗
42. Aegerter · 2013
43. Improvement of hydroxyapatite sol–gel coating on titanium with ammonium hydroxide addition10.1111/j.1551-2916.2004.00030.x ↗
44. Osteoblast adhesion and matrix mineralization on sol–gel-derived titanium oxide10.1016/j.biomaterials.2005.11.014 ↗
45. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
46. Scratch resistance and electrochemical corrosion behavior of hydroxyapatite coatings on Ti 6 Al 4 V in simulated physiological media10.1007/s10800-012-0504-3 ↗
47. A review on nano-TiO2 sol–gel type syntheses and its applications10.1007/s10853-011-5378-y ↗
48. Fabrication of TiO2 crystalline coatings by combining Ti-6Al-4V anodic oxidation and heat treatments
49. Phase characterization of TiO2 powder by XRD and TEM
50. Particle size effects on transformation kinetics and phase stability in nanocrystalline TiO210.2138/am-1997-7-809 ↗
51. Titanium dioxide reinforced hydroxyapatite coatings deposited by high velocity oxy-fuel (HVOF) spray10.1016/S0142-9612(01)00082-5 ↗
52. Impact formation and microstructure characterization of thermal sprayed hydroxyapatite/titania composite coatings10.1016/S0142-9612(02)00431-3 ↗
53. Effect of calcining temperature on particle size of hydroxyapatite synthesized by solid-state reaction at room temperature10.1016/j.apt.2013.03.002 ↗
54. Sol-gel-derived hydroxyapatite powders and coatings10.1023/A:1012462332440 ↗
55. Wereszczak · 2009
56. Zhang · 2016
57. The properties of bioactive TiO 2 coatings on Ti-based implants10.1016/j.surfcoat.2012.08.037 ↗
58. Plasma sprayed hydroxyapatite coatings on titanium substrates Part 1: mechanical properties and residual stress levels10.1016/S0142-9612(98)00103-3 ↗
59. Characterization and corrosion resistance of plasma sprayed HA and HA–SiO2 coatings on Ti–6Al–4V10.1016/j.surfcoat.2013.04.036 ↗
60. Interfacial characteristics and determination of cohesive and adhesive strength of plasma-coated hydroxyapatite via nanoindentation and microscratch techniques10.1021/la502802f ↗
61. Nanoscratch test—a tool for evaluation of cohesive and adhesive properties of thin films and coatings
62. Fabrication mechanism of nanostructured HA/TNTs biomedical coatings: an improvement in nanomechanical and in vitro biological responses10.1007/s10856-016-5758-6 ↗
63. Electrophoretic deposition (EPD) of nano-hydroxyapatite coatings with improved mechanical properties on prosthetic Ti6Al4V substrates10.1016/j.surfcoat.2015.12.058 ↗
64. Increasing the tribological performances of Ti–6Al–4V alloy by forming a thin nanoporous TiO2 layer and hydroxyapatite electrodeposition under lubricated conditions10.1016/j.triboint.2014.05.013 ↗