Residual stress and microstructure effects on mechanical, tribological and electrical properties of TiN coatings on 304 stainless steel
Source abstract
Abstract
Abstract Mechanical, tribological and electrical properties of TiN coatings on 304 stainless steel were investigated and the effects of microstructure and residual stress on these properties were studied. Microstructure, surface roughness, hardness and preferred orientation of the coatings were investigated by AFM, SEM, nanoindentation and XRD. Residual stress of the coatings was designed and controlled in a relatively narrow range successfully using negative bias voltage based on the film thickness effect on residual stress. Residual stress was investigated by grazing-incidence X-ray diffraction using the optimized cos2α sin2ψ method. Friction behavior and wear characteristics were evaluated using a tribometer. The results indicate a great influence of microstructure and residual stress on the properties and service behavior of TiN coatings. Based on the experimental findings, an intermediate residual stress and proper microstructure are of vital importance to achieve better performance of coatings during service.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Applicability of ALE TiN films as Cu/Si diffusion barriers10.1016/S0040-6090(00)01049-X ↗
2. Optimization of plasma parameters for high rate deposition of titanium nitride films as protective coating on bell-metal by reactive sputtering in cylindrical magnetron device10.1016/j.apsusc.2008.03.047 ↗
3. Cross-sectional X-ray nano-diffraction and -reflectivity analysis of multilayered AlTiN–TiSiN thin films: correlation between residual strain and bi-layer period10.1016/j.scriptamat.2015.06.008 ↗
4. Mechanical properties and high temperature oxidation of CrAlSiN / TiVN hard coatings synthesized by cathodic arc evaporation10.1016/j.surfcoat.2016.02.047 ↗
5. Effect of temperature of annealing below 900°C on structure, properties and tool life of an AlTiN coating under various cutting conditions10.1016/j.surfcoat.2007.10.034 ↗
6. Interface and strain energy revolution texture map to predict structure and optical properties of sputtered PbSe thin films10.1021/acsami.5b09724 ↗
7. Development of hafnium based high-k materials – a review10.1016/j.mser.2010.12.001 ↗
8. Thickness dependent microstructural and electrical properties of TiN thin films prepared by DC reactive magnetron sputtering10.1016/j.ceramint.2015.10.070 ↗
9. Study of cracking mechanisms in multi-layered composite nano-structured coatings10.1016/j.wear.2017.01.101 ↗
10. Effects of CMAS penetration on the delamination cracks in EB-PVD thermal barrier coatings with curved interface10.1016/j.ceramint.2017.04.025 ↗
11. Experimental and numerical investigation of buckling and delamination of Ti/TiN coatings on depleted uranium under compression10.1016/j.apsusc.2017.06.077 ↗
12. Frank wear of PVD-coated cutting tools during continuous turning of alloy 71810.2493/jjspe.82.460 ↗
13. Relationship between cracks and microstructures in APS YSZ coatings at elevated temperatures10.1016/j.matchar.2017.07.008 ↗
14. Microstructure and properties of laser-cladded bimodal composite coatings derived by composition design10.1016/j.jallcom.2018.02.165 ↗
15. Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique10.1016/j.tsf.2017.06.016 ↗
16. Advanced characterization methods for wear resistant hard coatings: a review on recent progress10.1016/j.surfcoat.2015.11.016 ↗
17. Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films10.1016/j.tsf.2009.03.043 ↗
18. Effect of PVD film's residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools10.1016/j.cirpj.2016.11.003 ↗
19. Effects of residual stress on the mechanical properties of plasma-sprayed thermal barrier coatings10.1016/j.engfracmech.2013.08.016 ↗
20. Residual stress measurement in textured thin film by grazing-incidence X-ray diffraction10.1016/S0040-6090(02)00680-6 ↗
21. Film thickness effect on texture and residual stress sign transition in sputtered TiN thin films10.1016/j.ceramint.2017.06.050 ↗
22. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation10.1016/S1359-6454(01)00328-7 ↗
23. Crystalline size effects on texture coefficient,electrical and optical properties of sputter-deposited Ga-doped ZnO thin films10.1016/j.jmst.2014.11.009 ↗
24. Development of texture in TiN films deposited by filtered cathodic vacuum arc10.1016/S0022-0248(03)00871-6 ↗
25. Stress and preferred orientation in nitride-based PVD coatings10.1016/j.surfcoat.2007.08.029 ↗
26. In-situ stress gradient evolution and texture-dependent fracture of brittle ceramic thin films under external load10.1016/j.ceramint.2018.01.265 ↗
27. Influence of substrate bias voltage on structure and properties of the CrAlN films deposited by unbalanced magnetron sputtering
28. A comparative study of CrAlN films synthesized by dc and pulsed dc reactive magnetron facing target sputtering system with different pulse frequencies10.1016/j.jallcom.2010.08.042 ↗
29. Thermal stability of PVD hard coatings10.1016/S0042-207X(02)00751-0 ↗
30. The effects of composition and pulsed biasing on chromium nitride films10.1016/j.surfcoat.2009.05.049 ↗
31. Effects of substrate bias frequencies on the characteristics of chromium nitride coatings deposited by pulsed DC reactive magnetron sputtering10.1016/j.surfcoat.2008.08.039 ↗
32. Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings10.1016/j.surfcoat.2007.12.014 ↗
33. Structural and mechanical properties of compositionally gradient CrNx coatings prepared by arc ion plating10.1016/j.apsusc.2009.07.002 ↗
34. Electrical and structural properties of indium tin oxide films prepared by pulsed laser deposition10.1063/1.1427137 ↗
35. Effect of nitrogen flow rate on structure and properties of nanocrystalline TiN thin films produced by unbalanced magnetron sputtering10.1016/j.surfcoat.2004.07.066 ↗
36. The influence of surface roughness on electrical conductance of thin Cu films: an ab initio study10.1063/1.2937188 ↗
37. The role of the nitrogen flow rate on the transport properties of CrN thin films produced by DC magnetron sputtering10.1016/j.surfcoat.2017.11.009 ↗
38. The structure and tribological behaviors of CrN and Cr-Ti-N coatings10.1016/j.apsusc.2007.02.061 ↗