journal article·2017-09

Effect of oxidation treatment on KD–II SiC fiber–reinforced SiC composites

Yuxin Chai, Xingui Zhou, Huayu Zhang

Ceramics International· Volume 43· Issue 13
Publisher page

Abstract

Abstract Continuous silicon carbide fiber–reinforced silicon carbide matrix (SiC f /SiC) composites have developed into a promising candidate for structural materials for high–temperature applications in aerospace engine systems. This is due to their advantageous properties, such as low density, high hardness and strength, and excellent high temperature and oxidation resistance. In this study, SiC f /SiC composites were fabricated via polymer infiltration and pyrolysis (PIP) with the lower–oxygen–content KD–II SiC fiber as the reinforcement; a mixture of 2,4,6,8–tetravinyl–2,4,6,8–tetramethylcyclotetrasiloxane (V4) and liquid polycarbosilane (LPCS), known as LPVCS, was used as the precursor; while pyrolytic carbon (PyC) was used as the interface. The effects of oxidation treatment at different temperatures on morphology, structure, composition, and mechanical properties of the KD–II SiC fibers, SiC matrix from LPVCS precursor conversion, and SiC f /SiC composites were comprehensively investigated. The results revealed that the oxidation treatment greatly impacted the mechanical properties of the SiC fiber, thereby significantly influencing the mechanical properties of the SiC f /SiC composite. After oxidation at 1300 °C for 1 h, the strength retention rates of the fiber and composite were 41% and 49%, respectively. In terms of the phase structure, oxidation treatment had little effect on the SiC fiber, while greatly influencing the SiC matrix. A weak peak corresponding to silica (SiO 2 ) appeared after high–temperature treatment of the fiber; however, oxidation treatment of the matrix led to the appearance of a very strong diffraction peak that corresponds to SiO 2 . The analysis of the morphology and composition indicated cracking of the fiber surface after oxidation treatment, which was increasingly obvious with the increase in the oxidation treatment temperature. The elemental composition of the fiber surface changed significantly, with drastically decreased carbon element content and sharply increased oxygen element content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Effects of ZrO2 coating on the strength improvement of 2.5D SiCf/SiO2 composites10.1016/j.ceramint.2016.09.164 ↗
2. Effect of intermediate heat treatment on mechanical properties of SiC/SiC composites with BN interphase prepared by ICVI10.1016/j.jeurceramsoc.2010.12.018 ↗
3. Design, preparation and properties of non–oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
4. Development of silicon carbide fiber–reinforced silicon carbide matrix composites with high performance based on interfacial and microstructure control10.2109/jcersj2.118.82 ↗
5. Mechanical properties and oxidation resistance of SiCf/CVI–SiC composites with PIP–SiC interphase10.1016/j.ceramint.2012.01.045 ↗
6. Interface design for oxidation–resistant ceramic composites10.1111/j.1151-2916.2002.tb00505.x ↗
7. Microstructure and mechanical properties of compact SiC/SiC composite fabricated with an infiltrative liquid precursor10.1111/jace.13451 ↗
8. Single–and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview10.1111/j.1744-7402.2009.02424.x ↗
9. Mechanical properties of SiC/SiC composites by PIP process with a new precursor at elevated temperature10.1016/j.msea.2014.03.011 ↗
10. Mechanical properties and in situ crack growth observation of SiC/SiC composites10.1016/j.ceramint.2013.12.098 ↗
11. Mechanical properties and oxidation resistance of SiCf/CVI–SiC composites with PIP–SiC interphase10.1016/j.ceramint.2012.01.045 ↗
12. Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites10.1016/j.msea.2009.07.018 ↗
13. Effects of thermal oxidation on electromagnetic interference shielding properties of SiC/SiC composites10.1016/j.ceramint.2012.11.007 ↗
14. Effects of thermal oxidation on microwave–absorbing and mechanical properties of SiC/SiC composites with PyC interphase10.1016/S1003-6326(15)63749-9 ↗
15. Effect of heat treatment on microstructure and mechanical properties of PIP–SiC/SiC composites10.1016/j.msea.2012.09.027 ↗
16. Oxidation behaviour of SiC/SiC ceramic matrix composites in air10.1016/j.jeurceramsoc.2016.05.051 ↗
17. Oxidation behaviour of mullite–coated SiC and SiC/SiC composites under thermal cycling between room temperature and 1200℃–1400°C10.1111/j.1151-2916.1996.tb07920.x ↗
18. Oxidation of BN–coated SiC fibers in ceramic matrix composites10.1111/j.1151-2916.1996.tb08163.x ↗
19. High temperature oxidation of ceramic matrix composites10.1351/pac199870020493 ↗
20. Mechanical properties of 3D KD–I SiC/SiC composites with engineered fiber–matrix interfaces10.1016/j.compscitech.2011.01.014 ↗
21. Microstructure, mechanical properties and reaction mechanism of KD–I SiC/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration10.1016/j.msea.2010.12.028 ↗
22. Effects of heat treatment on the microstructures and properties of KD–I SiC fibers10.1179/1432891715Z.0000000001587 ↗
23. Fiber strength measurement for KD–I(f)/SiC composites and correlation to tensile mechanical behavior at room and elevated temperatures10.1016/j.ceramint.2014.08.072 ↗
24. Mechanical properties of SiC/SiC composites with PyC and the BN interface10.1016/j.ceramint.2015.02.041 ↗
25. Atomic layer deposited titanium dioxide coatings on KD–II silicon carbide fibers and their characterization10.1016/j.apsusc.2016.01.183 ↗
26. Effect of heat treatment on the microstructure and tensile strength of KD–II SiC fibers10.1016/j.msea.2016.07.066 ↗
27. Tension–tension fatigue behavior of a PIP SiC/SiC composite at elevated temperature in air10.1016/j.ceramint.2015.10.116 ↗
28. Low cycle fatigue behavior of a 3D braided KD–I fiber reinforced ceramic matrix composite for coated and uncoated specimens at 1100℃ and 1300℃10.1016/j.msea.2015.01.078 ↗
29. Influence of thermal oxidation on complex permittivity and microwave absorbing potential of KD–I SiC fiber fabrics
30. Mechanical and microwave dielectric properties of KD–I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis10.1016/j.ceramint.2014.01.113 ↗
31. SiC/SiC composite fabricated with carbon nanotube interface layer and a novel precursor LPVCS10.1016/j.fusengdes.2014.01.051 ↗
32. The properties of Cf/SiC composites prepared from different precursors10.1016/j.ceramint.2014.12.111 ↗
33. Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers10.1016/j.jnucmat.2004.04.123 ↗
34. Tensile properties of heat–treated Nicalon and Hi–Nicalon fibers10.1016/S1359-835X(01)00125-7 ↗