An evaluation of plasma-sprayed coatings based on Al2O3 and Al2O3–13wt.% TiO2 with bond coat on pure titanium substrate
Source abstract
Abstract
Abstract In this study, the effects of bond coat on the properties of Al 2 O 3 and Al 2 O 3 –13 wt.% TiO 2 coatings, which is plasma sprayed onto a commercial pure titanium substrate with and without Ni–5 wt.% Al (METCO 450 NS) as bond coating layer were investigated in terms of microhardness, bonding strength and surface roughness. Optical and scanning electron microscopy (SEM) examinations revealed that there is a uniform coating layer with no spalling and delamination. However, there is a little amount of porosity. The results indicated that the application of bond coat layer in the plasma spraying of Al 2 O 3 and Al 2 O 3 –13 wt.% TiO 2 on pure titanium substrate has increased the hardness and bonding strength of coatings. While the adhesive bonding is dominant without bond coat, the cohesive bonding is dominant with the application of the bond coating layer. It has been observed that percentage of cohesion strength was about three times higher than that of adhesion strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Abrasive wear characteristic of plasma sprayed nanostructured alumina/titania coatings10.1016/S0043-1648(99)00323-3 ↗
2. Effects of TiO2 on the mechanical properties of the Al2O3–TiO2 plasma sprayed coating10.1016/j.jeurceramsoc.2006.04.099 ↗
3. Crystallization kinetics of plasma sprayed basalt coatings10.1016/j.ceramint.2005.03.032 ↗
4. Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode10.1016/j.tsf.2003.11.166 ↗
5. Microstructure characteristic of Al2O3–13wt.% TiO2 coating plasma spray deposited with nanocrystalline powders10.1016/j.jmatprotec.2007.06.001 ↗
6. Structural characterization of basalt-based glass–ceramic coatings10.1016/j.matdes.2005.04.004 ↗
7. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3-8wt.% TiO2 coatings plasma-sprayed with nanopowders10.1016/j.surfcoat.2008.01.002 ↗
8. Adhesion and microstructural characterization of plasma sprayed hydroxyapatite/glass ceramics coatings onto Ti–6Al–4V substrates10.1016/S0257-8972(97)00576-8 ↗
9. Grit blasting of Ti–6Al–4V alloy: optimization and its effect on adhesion strength of plasma-sprayed hydroxyapatite coatings10.1016/j.jmatprotec.2007.03.119 ↗
10. Plasma sparay coating of fly ash pre-mixed with aluminium powder deposited on metal substrates10.1016/S0924-0136(99)00443-4 ↗
11. Development of plasma-sprayed bioceramic coatings with bond coats based on titania and zirconia10.1016/S0142-9612(98)00067-2 ↗
12. The effect of boand coat on mechanical properties of plasma sprayed bioglass–titanium coatings10.1016/S0272-8842(03)00107-X ↗
13. The effect of bond coat on mechanical properties of plasma sprayed Al2O3 and Al2O3–13wt.% TiO2 coatings on AISI 316L stainless steel10.1016/j.vacuum.2004.11.004 ↗
14. Double-layer glass–ceramic coatings on Ti6Al4V for dental implants10.1016/j.jeurceramsoc.2003.09.004 ↗
15. Plasma-sprayed hydroxyapatite titania composite bond coat for hydroxyapatite coating on titanium substrate10.1016/j.biomaterials.2003.10.092 ↗
16. Studies on a combined reactive plasma sprayed/arc deposited duplex coating for titanium alloys10.1016/j.surfcoat.2006.01.066 ↗
17. Microstructure development of Al2O3–13wt.% TiO2 plasma sprayed coatings derived from nanocrystalline powders10.1016/S1359-6454(01)00414-1 ↗
18. Relationship between particle erosion and lamellar microstructure for plasma-sprayed alumina coatings10.1016/j.wear.2005.07.006 ↗
19. Effects on performance of Cr2O3 layers produced on Mo/cast–iron materials10.1016/S0257-8972(03)00361-X ↗
20. Microstructural and mechanical characterization of plasma sprayed Al2O3–TiO2 composite ceramic coating on Mo/cast iron substrates10.1016/j.matlet.2005.04.055 ↗
21. Particle in-flight behavior and its influence on the microstructure and mechanical properties of plasma-sprayed Al2O3 coatings10.1016/j.jeurceramsoc.2007.09.050 ↗
22. Tribological behaviour of plasma sprayed Al2O3–based cermet coatings10.1016/S0043-1648(99)00096-4 ↗
23. Characterization of alumina–3wt.% titania coating prepared by plasma spraying of nanostructured powders10.1016/S0955-2219(03)00254-1 ↗
24. Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode10.1016/j.tsf.2003.11.166 ↗
25. An investigation of different ceramic coating thermal properties10.1016/j.matdes.2004.12.010 ↗
26. Microstructural, thermal and mechanical properties of HVOF sprayed Ni–Al-based bond coatings on stainless steel substrate10.1016/j.jmatprotec.2007.11.036 ↗