journal article·2015-11

Grain growth suppression in alumina via doping and two-step sintering

Katarína Bodišová, Dušan Galusek, Peter Švančárek, Václav Pouchlý, Karel Maca

Ceramics International· Volume 41· Issue 9
Publisher page

Abstract

Abstract Efficiency of two-step sintering on grain growth elimination in the final stage of sintering of polycrystalline alumina has long been considered questionable. The published works failed either to suppress the grain growth entirely or to achieve the relative densities above 99% where the grain growth is the most severe. This paper reports on successful grain growth elimination in the final stage of sintering of a sub-micron alumina ceramics by a combination of the two-stage sintering and doping with metal oxides (MgO, ZrO 2 or Y 2 O 3 ). Relative densities up to 99.7% were achieved. Neither doping of aluminas sintered under conventional conditions nor the two-step sintering of pure alumina alone resulted in entire grain growth suppression in the final stage of sintering. A combination of the two-step heating regime with suitable doping (500 ppm MgO added as MgAl 2 O 4 nanopowder) led to complete grain growth suppression at relative densities above 99%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Grain-size dependence of hardness in dense submicrometer alumina10.1111/j.1151-2916.1995.tb08452.x ↗
2. Effects of grain size and humidity on fretting wear in fine-grained alumina, Al2O3/TiC, and zirconia10.1111/j.1151-2916.1996.tb08565.x ↗
3. The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina10.1016/0955-2219(96)00044-1 ↗
4. Effect of grain size on transmittance and mechanical strength of sintered alumina10.1016/j.msea.2004.02.015 ↗
5. Transparent sintered corundum with high hardness and strength10.1111/j.1151-2916.2003.tb03270.x ↗
6. Transparent alumina: a light-scattering model10.1111/j.1151-2916.2003.tb03325.x ↗
7. Hot-pressing of nano-size alumina powder and the resulting mechanical properties10.1111/j.1744-7402.2004.tb00167.x ↗
8. Sinter-HIP of alpha-alumina powders with sub-micron grain sizes10.1016/S0955-2219(01)00510-6 ↗
9. Retention of nanostructure in aluminum-oxide by very rapid sintering at 1150-degrees-C10.1557/JMR.1995.0237 ↗
10. Effects of heating rate on densification and grain growth during field-assisted sintering of alpha-Al2O3 and MoSi2 powders10.1007/s11661-001-0053-6 ↗
11. Densification and grain growth in pulse electric current sintering of alumina10.1016/j.jeurceramsoc.2003.10.013 ↗
12. Microwave sintering of transparent alumina10.1016/S0167-577X(02)00557-8 ↗
13. Two-stage sintering of alumina with submicrometer grain size10.1111/j.1551-2916.2006.01408.x ↗
14. Suppression of grain growth in sub-micrometer alumina via two-step sintering method10.1016/j.jeurceramsoc.2008.08.027 ↗
15. Two-step sintering of oxide ceramics with various crystal structures10.1016/j.jeurceramsoc.2009.06.008 ↗
16. Sintering dense nanocrystalline ceramics without final-stage grain growth10.1038/35004548 ↗
17. Two-step sintering of ceramics with constant grain-size, II: BaTiO3 and Ni–Cu–Zn ferrite10.1111/j.1551-2916.2005.00728.x ↗
18. Approach to sintering nanocrystalline barium titanate ceramics10.1111/j.1551-2916.2005.00552.x ↗
19. Dense nanostructured zirconia by two stage conventional/hybrid microwave sintering10.1016/j.jeurceramsoc.2007.09.002 ↗
20. Two-step sintering of nanocrystalline ZnO compacts: effect of temperature on densification and grain growth10.1111/j.1551-2916.2007.02029.x ↗
21. Fabrication of transparent lanthanum-doped yttria ceramics by combination of two-step sintering and vacuum sintering10.1111/j.1551-2916.2009.03312.x ↗
22. Preparation of dense nanostructured titania ceramic using two step sintering10.1179/175355509X12608871787997 ↗
23. Suppression of abnormal grain growth in WC–Co via two-step liquid phase sintering10.1111/j.1551-2916.2010.04198.x ↗
24. Two-step sintering and spark plasma sintering of Al2O3, ZrO2 and SrTiO3 ceramics10.1080/10584580802107841 ↗
25. The influence of additives on microstructure of sub-micron alumina ceramics prepared by two-stage sintering10.1016/j.jeurceramsoc.2011.11.038 ↗
26. The influence of minor additives on densification and microstucture of submicrometer alumina ceramics prepared by Sps and Hip10.1002/9780470599730.ch19 ↗
27. Densification of fine-grained alumina ceramics doped by magnesia, yttria and zirconia evaluated by two different sintering models10.1016/j.jeurceramsoc.2014.06.030 ↗
28. Effect of MgO solute on the kinetics of grain-growth in Al2O310.1111/j.1151-2916.1983.tb10065.x ↗
29. Effect of interface structure on the microstructural evolution of ceramics10.1111/j.1551-2916.2006.01160.x ↗
30. Influence of interface energies on solute partitioning mechanisms in doped aluminas10.1016/j.actamat.2010.05.045 ↗
31. Transparent polycrystalline alumina using spark plasma sintering: effect of Mg, Y and La doping10.1016/j.jeurceramsoc.2009.12.001 ↗
32. Yttrium segregation and Yag precipitation at surfaces of yttrium-doped alpha-Al2O310.1111/j.1151-2916.1986.tb04839.x ↗
33. Dopant distribution in nominally yttrium-doped sapphire10.1111/j.1151-2916.1986.tb04838.x ↗
34. Grain-boundary diffusion of Cr in pure and Y-doped alumina10.1111/j.1551-2916.2007.01584.x ↗
35. Role of segregating dopants on the improved creep resistance of aluminum oxide10.1016/S1359-6454(99)00278-5 ↗
36. Effect of yttrium and lanthanum on the final-stage sintering behavior of ultrahigh-purity alumina10.1111/j.1151-2916.1997.tb03084.x ↗
37. Hardening in creep of alumina by zirconium segregation at the grain boundary10.1111/j.1151-2916.1997.tb03128.x ↗
38. Effect of amount of doping agent on sintering, microstructure and optical properties of Zr- and La-doped alumina sintered by SPS10.1016/j.jeurceramsoc.2013.11.015 ↗
39. Atmospheric pressure air plasma treated alumina powder for ceramic sintering10.1016/j.ceramint.2014.04.124 ↗
40. The influence of ageing on consolidation and sinterability of a sub-micron alumina powder10.1016/j.powtec.2011.08.034 ↗
41. Processing and properties of fine-grained transparent MgAl2O4 ceramics
42. Effect of sintering schedule on grain size of oxide ceramics10.1007/s10853-005-1332-1 ↗
43. Fabrication of dense nanostructured silicon carbide ceramics through two-step sintering10.1111/j.1151-2916.2003.tb03560.x ↗
44. Fast firing – microstructural benefits
45. Linear intercept technique for measuring grain-size in 2-phase polycrystalline ceramics10.1111/j.1151-2916.1972.tb11224.x ↗
46. Steele · 1984 · 830
47. Coarsening in sintering: grain shape distribution, grain size distribution, and grain growth kinetics in solid-pore systems10.1080/10408436.2010.525197 ↗
48. Compaction and pressureless sintering of zirconia nanoparticles10.1111/j.1551-2916.2007.01781.x ↗
49. Influence of various consolidation techniques on the green microstructure and sintering behavior of alumina powders10.1111/j.1151-2916.1988.tb07567.x ↗
50. Effects of particle packing characteristics on solid-state sintering10.1111/j.1151-2916.1989.tb06222.x ↗
51. Warm pressing of zirconia nanoparticles by the spark plasma sintering technique10.1016/j.scriptamat.2008.02.015 ↗
52. Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina10.1111/j.1551-2916.2006.00985.x ↗
53. Examination of morphological changes of pore channel network during the intermediate stage of sintering of undoped, MgO-doped and ZrO2-doped alumina compacts by modified statistical theory of sintering10.1007/s10853-005-0673-0 ↗
54. Effect of initial grain size on sintering trajectories10.1016/S1359-6454(99)00433-4 ↗
55. Influence of triple junctions on grain boundary motion10.1016/S1359-6454(98)00241-9 ↗
56. Two-step sintering of ceramics with constant grain-size, I. Y2O310.1111/j.1551-2916.2005.00763.x ↗
57. Activation-energy for the sintering of 2-phase alumina zirconia ceramics10.1111/j.1151-2916.1991.tb07815.x ↗