journal article·2015-01

Influence of transition metal doping on the tribological properties of pulsed laser deposited DLC films

S. Gayathri, N. Kumar, R. Krishnan, T.R. Ravindran, S. Amirthapandian, S. Dash, A.K. Tyagi, M. Sridharan

Ceramics International· Volume 41· Issue 1
Publisher page

Abstract

Abstract Doped or alloyed diamond-like carbon (DLC) films exhibit superior properties compared to undoped DLC films. But the choice of dopant plays a vital role in tailoring specific properties of the DLC film desired for specific application. In the present work, a comparative study has been carried out in order to bring out the effect of transition metal (TM) doped DLC film on the tribological properties. Nanocomposite DLC/TM (TM=Ag, Ti and Ni) films were deposited by nanosecond pulsed laser deposition (PLD) technique on to AISISS304 substrates. Films microstructure and chemical behavior was studied by glancing incidence X-ray diffraction (GI-XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and high resolution transmission electron microscopy (HRTEM). The sp 2 and sp 3 fraction in the films are well described by electron energy loss spectroscopy (EELS) analysis. The Raman spectra of DLC/TM films showed peak shift towards lower wavenumber indicating the reduction of internal compressive stress. Formation of TM nanoclusters and TiC phases were confirmed in DLC/TM films by GI-XRD, XPS and HRTEM. DLC film doped with nanocrystalline Ag showed low friction behavior due to the formation of large amount of sp 2 lubricant phase. However, high friction coefficient measured in DLC film doped with Ni and Ti. Such a high friction is explained by the presence of hard TiC and sp 3 phase in the DLC/Ti and DLC/Ni films respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Effect of boron incorporation on the structure and electrical properties of diamond-like carbon films deposited by femtosecond and nanosecond pulsed laser ablation10.1016/j.tsf.2009.09.111 ↗
2. Effects of hydrogen on the properties of Si-incorporated diamond-like carbon films prepared by pulsed laser deposition10.1016/j.diamond.2011.01.043 ↗
3. Mechanical properties of diamond-like carbon composite thin films prepared by pulsed laser deposition10.1016/S1359-8368(99)00035-9 ↗
4. Magnetron sputtering of nanocomposite (Ti,Cr)CN/DLC coatings10.1016/S0257-8972(02)00561-3 ↗
5. A study of structure and properties of Ti-doped DLC film by reactive magnetron sputtering with ion implantation10.1016/j.apsusc.2011.11.034 ↗
6. Characteristics of DLC containing Ti and Zr films deposited by reactive magnetron sputtering10.1016/j.phpro.2011.06.049 ↗
7. Synthesis and characterization of CrCN–DLC composite coatings by cathodic arc ion-plating10.1016/j.nimb.2013.04.040 ↗
8. Phase transformation of diamond-like carbon/silver composite films by sputtering deposition10.1016/j.ceramint.2012.09.019 ↗
9. Modulation of field emission properties of DLC films with the incorporation of nanocrystalline silver nanoparticles by CVD technique10.1016/j.surfcoat.2010.05.019 ↗
10. Tribological behaviour of Ti containing nanocomposite DLC films under milli-Newton load range10.1016/j.diamond.2008.06.011 ↗
11. Duplex doped nanocomposite carbon-based coating with self-lubricating performance10.1016/j.diamond.2011.10.011 ↗
12. Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique10.1016/j.apsusc.2012.01.072 ↗
13. Composition, mechanical properties and friction behavior of nickel/hydrogenated amorphous carbon composite films10.1016/j.surfcoat.2005.11.045 ↗
14. EELS analysis of vacuum arc-deposited diamond-like films10.1080/09500838808214715 ↗
15. ELNES study of carbon K-edge spectra of plasma deposited carbon films10.1039/b406468m ↗
16. Ferrari · Philos. Trans. R. Soc. London, Ser. A · 2004 · 362 · 247710.1098/rsta.2004.1452 ↗
17. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
18. Ultraviolet Raman characterisation of diamond-like carbon films10.1016/S0925-9635(98)00430-0 ↗
19. Raman scattering from MeV-ion implanted diamond10.1103/PhysRevB.52.8106 ↗
20. Thin film hardness determination using indentation loading curve modelling10.1016/j.tsf.2010.05.063 ↗
21. Mechanical properties of diamond-like carbon composite thin films prepared by pulsed laser deposition10.1016/S1359-8368(99)00035-9 ↗
22. Characterization of amorphous and nanocrystalline carbon films10.1016/j.matchemphys.2005.07.048 ↗
23. Narayan · Laser processing of diamond-like carbon-metal composites, Appl. Surf. Sci. · 2005 · 245 · 420
24. Wolf · Stress measurements in Si microelectronics devices using Raman spectroscopy, J. Raman Spectrosc. · 1999 · 30 · 877
25. Spectroscopic studies on DLC/TM (Cr, Ag, Ti, Ni) multilayers10.1016/j.materresbull.2011.11.042 ↗
26. X-ray photoelectron diffraction on the nickel/diamond, the silicon/diamond and the gold/diamond interface10.1016/0925-9635(94)05216-6 ↗
27. Theoretical electronic structure studies of diamond: surfaces, adsorbates, defects and heterointerfaces10.1016/0921-5107(92)90334-6 ↗
28. Tribological properties of pulsed laser deposited DLC/TM (TM=Cr, Ag, Ti and Ni) multilayers10.1016/j.triboint.2012.04.015 ↗
29. The effects of deposition parameters on the structure and properties of titanium-containing DLC films synthesized by cathodic arc plasma evaporation10.1016/j.surfcoat.2008.06.073 ↗
30. Separation of the sp3 and sp2 components in the C1s photoemission spectra of amorphous carbon films10.1103/PhysRevB.54.8064 ↗
31. Comparative surface and nano-tribological characteristics of nanocomposite diamond-like carbon thin films doped by silver10.1016/j.apsusc.2008.07.193 ↗
32. Structure, scratch resistance and corrosion performance of nickel doped diamond-like carbon thin films10.1016/j.surfcoat.2010.02.057 ↗
33. Impact of laser power density on tribological properties of pulsed laser deposited DLC films10.1063/1.4856335 ↗
34. Z-contrast imaging and electron energy-loss spectroscopy analysis of chromium-doped diamond-like carbon films10.1063/1.125134 ↗
35. Structure and properties of silver-containing a-C(H) films deposited by plasma immersion ion implantation10.1016/j.surfcoat.2008.01.011 ↗
36. Structural and physical properties of highly piezoresistive nickel containing hydrogenated carbon thin films10.1016/j.diamond.2012.01.031 ↗
37. Duplex doped nanocomposite carbon-based coating with self-lubricating performance10.1016/j.diamond.2011.10.011 ↗
38. Low friction and protective diamond-like carbon coatings deposited by asymmetric bipolar pulsed plasma10.1016/j.diamond.2009.01.003 ↗