The effect of pulse-reverse electroplating bath temperature on the wear/corrosion response of Ni-Co/tungsten carbide nanocomposite coating during layer deposition
Source abstract
Abstract
Abstract In this article, the effect of bath temperature during layer deposition on the electrochemical/abrasion responses of Ni-Co/tungsten carbide nanocomposite coating has been investigated. The Ni-Co/tungsten carbide nanocomposite coating was obtained using simultaneous deposition of tungsten carbide nanoparticles in three Ni-Co bath temperatures of 20, 40, and 60 °C. Afterwards, in order to characterize the obtained coatings, Field Emission Scanning Electron Microscopy (FE-SEM) and Transmission Electron Microscopy (TEM), X-Ray diffraction (XRD), MAP analysis, potentiodynamic polarization and electrochemical impedance spectroscopy methods in 3.5 wt% NaCl, and also abrasion test using a pin on disc method were carried out. The results of this study revealed that the deposition obtained from Ni-Co bath contains tungsten carbide nanoparticles and results in strong (200) and hard (111) textures in the coating at different temperatures. Also increasing the bath temperature from 20 to 40 °C results in the absorption of cobalt and tungsten carbide nanoparticles, as well as reducing the nickel content and corrosion resistance in the coating, and on one hand it increases the abrasion resistance of the coating. However, a bath-temperature increase from 40 to 60 °C results in reducing the absorption of cobalt and tungsten carbide nanoparticles, and increasing the nickel content and corrosion resistance in the coating as well as reducing the abrasion resistance of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Ultrasound assisted electroplating of nano-composite thin film of Cu matrix with electrochemically in-house synthesized few layer graphene nano-sheets as reinforcement10.1016/j.jallcom.2018.03.264 ↗
2. The effect of heat treatment on corrosion behaviour of Ni–P–3 g/lit Cu nano-composite coating10.1080/00084433.2018.1444367 ↗
3. Deposition of Al2O3 ceramic film on copper-based heterostructured coatings by aluminizing process: study of the electrochemical responses and corrosion mechanism of the coating
4. The effect of electroless bath parameters and heat treatment on the properties of Ni-P and Ni-P-Cu composite coatings
5. Composite electroplating of Cu–SiO2 nano particles on carbon fiber reinforced epoxy composites10.1016/j.apsusc.2009.04.148 ↗
6. Effects of parallel magnetic field on electrocodeposition behavior of Fe/nano-Si particles composite electroplating10.1016/j.apsusc.2013.06.022 ↗
7. Fabrication and characterisation of electro-brush plated nickel-graphene oxide nano-composite coatings10.1016/j.tsf.2017.06.064 ↗
8. The preparation and characterization of a nano-CeO2/phosphate composite coating on magnesium alloy AZ91D10.1016/j.surfcoat.2017.09.014 ↗
9. Microstructure and properties of sol-enhanced Ni-Co-TiO2 nano-composite coatings on mild steel10.1016/j.jallcom.2015.07.147 ↗
10. Post weld heat treatment of hypereutectoid hadfield steel: characterization and control of microstructure, phase equilibrium, mechanical properties and fracture mode of welding joint10.1016/j.jmapro.2018.06.009 ↗
11. Drastic improvement in mechanical properties and weldability of 316L stainless steel weld joints by using electromagnetic vibration during GTAW process10.1016/j.jmapro.2018.05.002 ↗
12. Laser sintered graphene nickel nanocomposites10.1016/j.jmatprotec.2015.12.022 ↗
13. Ternary graphene/amorphous carbon/nickel nanocomposite film for outstanding superhydrophobicity10.1016/j.chemphys.2018.03.008 ↗
14. Ultrasound induced multilayer Ni-Co alloy coatings for better corrosion protection10.1016/j.surfcoat.2017.05.043 ↗
15. Ni–TiN and Ni-Co-TiN composite coatings for corrosion protection: fabrication and electrochemical characterization10.1016/j.jallcom.2017.11.169 ↗
16. Preparation and magnetic properties of Ni-Co-P-Ce coating by electroless plating on silicon substrate10.1016/j.tsf.2017.04.038 ↗
17. Novel bilayer ZnNi/NiCoSiC nanocomposite coating with exceptional corrosion and wear properties by pulse electrodeposition10.1016/j.jallcom.2017.12.093 ↗
18. Electrodeposition and corrosion behavior of nano-structured Ni-WC and Ni-Co-WC composite coating10.1016/j.jallcom.2016.10.290 ↗
19. Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers10.1016/j.matdes.2017.04.002 ↗
20. Study of wear behavior of Ni-P-TiO2 composite coatings by optimizing coating parameters10.1016/j.matpr.2017.02.033 ↗
21. Study on properties of pulse electrodeposited RE-Ni-W-P-SiC composite coatings10.1016/S1006-7191(07)60015-5 ↗
22. Optimization of spot welding process parameters in dissimilar joint of dual phase steel DP600 and AISI 304 stainless steel to achieve the highest level of shear-tensile strength10.1016/j.msea.2018.04.072 ↗
23. Microstructure and tribological properties of electrodeposited Ni-Co alloy deposits10.1016/j.apsusc.2004.08.033 ↗
24. Corrosion resistance and microstructure of electrodeposited nickel-cobalt alloy coatings10.1016/j.surfcoat.2006.06.017 ↗
25. Structural, magnetic and corrosion properties of electrodeposited cobaltnickel-molybdenum alloys10.1016/j.elecom.2005.01.004 ↗
26. Influence of substrate, pH and magnetic field onto composition and current efficiency of electrodeposited Ni-Fe alloys10.1016/j.jelechem.2007.08.022 ↗
27. Microstructure properties of pulse plated Ni–Co alloy10.1016/j.surfcoat.2007.05.057 ↗
28. Kinetics of the deposition of inert particles from electrolytic baths10.1149/1.2404383 ↗
29. Modeling of a hybrid langmuir adsorption isotherm for describing interactions between drug molecules and silica surfaces10.1016/j.xphs.2017.12.025 ↗
30. Comparing chemometric and Langmuir isotherm for determination of maximum capacity adsorption of arsenic by a biosorbent10.1016/j.microc.2017.11.005 ↗
31. A new theoretical model – the ionic molar surface Gibbs free energy and its application10.1016/j.jct.2017.08.035 ↗
32. Enhancement of wear resistance of ductile cast iron by NiSiC composite coating10.1016/j.wear.2005.07.022 ↗
33. Composition, morphology, structural aspects and electrochemical properties of Ni–Co alloy coatings10.1016/j.surfcoat.2011.06.002 ↗
34. The influence of pH and bath composition on the properties of Ni–Co coatings synthesized by electrodeposition10.1016/j.vacuum.2011.03.027 ↗
35. A study on the effect of compositing silver oxide nanoparticles by carbon on the electrochemical behavior and electronic properties of zinc-silver oxide batteries
36. A study on the effect of presence of CeO2 and benzotriazole on activation of self-healing mechanism in ZrO2 ceramic-based coating
37. The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition
38. The effect of joint shape geometry on the microstructural evolution, fracture toughness, and corrosion behavior of the welded joints of a Hadfield steel
39. Sintering variables optimization, microstructural evolution and physical properties enhancement of nano-WC ceramics10.1016/j.jallcom.2018.07.006 ↗
40. S.H. Mousavi Anijdan, M. Sabzi, The evolution of microstructure of an high Ni HSLA X100 forged steel slab by thermomechanical controlled processing, in: Proceedings of the TMS Annual Meeting & Exhibition, 2018, pp. 145–156.10.1007/978-3-319-72526-0_14 ↗
41. The influence of pH, rotating speed and Cu content reinforcement nano-particles on wear/corrosion response of Ni-P-Cu nano-composite coatings10.1016/j.triboint.2018.05.040 ↗
42. Effect of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC-Co coatings
43. Abrasive wear behaviour of conventional and nanocomposite HVOFsprayed WC-Co coatings
44. Fabrication and evaluation of atmospheric plasma spraying WC-Co-Cu-MoS2 composite coatings10.1016/j.jallcom.2010.11.093 ↗
45. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying10.1016/S0040-6090(01)00805-7 ↗