Permeability of the porous Al2O3 ceramic with bimodal pore size distribution
Source abstract
Abstract
Abstract Porous Al2O3 ceramics with bimodal pore size distribution were fabricated by partial sintering with monodispersed PMMA micro balls as pore agent. The porosity of the fabricated porous Al2O3 is increased with content of the pore agent increase, the bulk density and bending strength are decreased, accordingly. Relations between pressure drop and flow velocity of the air through the porous Al2O3 fit the Forchheimer's equation well for compressible fluid. Due to pores introduced by the pore agent, the Darcy permeability and inertial permeability of the porous Al2O3 are increased obviously. For given flow velocity, with increase of the PMMA content, the Forchheimer's number of the fluid through the porous Al2O3 is decreased, which results in decrease of the inertial resistance ratio to the total pressure drop. The porous Al2O3 ceramics with pores introduced by the monodispersed PMMA micro balls show higher permeability while the filtration selectivity is not deteriorated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerosol Filtration and Electrostatic Precipitation · Lattice Boltzmann Simulation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Macro-porous ceramics: processing and properties10.1179/1743280411Y.0000000006 ↗
2. Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O310.1007/s12613-017-1409-2 ↗
3. The application of pressure-driven ceramic membrane technology for the treatment of industrial wastewaters - a review10.1016/j.seppur.2018.02.041 ↗
4. Scheffler · 2006
5. Effect of electrocorundum powder grain size composition with a porcelain binder on porous ceramic gas permeability and strength10.1007/s11148-017-0116-x ↗
6. High performance porous Si3N4 ceramics prepared by coated pore-forming agent method10.1016/j.ceramint.2009.05.007 ↗
7. Alumina ceramics prepared with new pore-forming agents10.2298/PAC0801001Z ↗
8. Physico-mechanical and gas permeability characteristics of kaolin based ceramic membranes prepared with a new pore-forming agent10.1016/j.clay.2017.09.014 ↗
9. Permeability and mechanical integrity of porous biomorphic SiC ceramics for application as hot-gas filters10.1016/j.matdes.2016.06.060 ↗
10. Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration10.1016/j.ceramint.2010.07.028 ↗
11. Formation of closed-pore foam ceramic from granite scraps10.1016/j.ceramint.2017.10.180 ↗
12. Permeability optimization and performance evaluation of hot aerosol filters made using foam incorporated alumina suspension10.1016/j.jhazmat.2008.05.025 ↗
13. The effect of polyvinyl alcohol on the microstructure and permeability of freeze-cast alumina10.1111/j.1551-2916.2009.03398.x ↗
14. Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores10.1016/j.jeurceramsoc.2006.02.030 ↗
15. Production of highly aligned porous alumina ceramics by extruding frozen alumina/camphene body10.1016/j.jeurceramsoc.2011.04.033 ↗
16. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering10.1016/j.msec.2014.02.022 ↗
17. Macroporous alumina ceramics with aligned microporous walls by unidirectionally freezing foamed aqueous ceramic suspensions10.1111/j.1551-2916.2010.03627.x ↗
18. Capillary rise properties of porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former10.1016/j.jeurceramsoc.2009.03.012 ↗
19. Extrusion method using nylon 66 fibers for the preparation of porous alumina ceramics with oriented pores10.1016/j.jeurceramsoc.2005.04.014 ↗
20. A green fabrication strategy for porous Yb3Al5O12 ceramics with high strength and tunable gas permeability10.1557/jmr.2016.319 ↗
21. High gas permeability of SiC porous ceramics reinforced by mullite fibers10.1016/j.jeurceramsoc.2016.06.048 ↗
22. Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size10.1016/j.ceramint.2014.10.032 ↗
23. Permeability of porous ceramic based on calcium carbonate as pore generating agent10.1016/j.ceramint.2014.12.031 ↗
24. Microstructure–permeability relation of porous β-Si3N4 ceramics10.1016/j.jeurceramsoc.2012.12.022 ↗
25. Permeability of high-alumina refractory castables based on various hydraulic binders10.1111/j.1151-2916.2002.tb00306.x ↗
26. Extrusion of highly porous silicon nitride ceramics with bimodal pore structure and improved gas permeability10.1111/jace.15265 ↗
27. Bear · 1984
28. On the derivation of the Forchheimer equation by means of the averaging theorem10.1007/BF01063962 ↗
29. Sieve mechanism of microfiltration10.1016/0376-7388(94)80102-9 ↗
30. Sieve mechanism of microfiltration separation10.1016/j.colsurfa.2003.09.027 ↗
31. A review of pressure-driven membrane processes in wastewater treatment and drinking water production10.1002/ep.670220116 ↗