Synthesis and investigation of TiO2 nanotube arrays prepared by anodization and their photocatalytic activity

Abstract TiO 2 nanotube arrays were successfully prepared by anodic oxidation method in the electrolyte of ethylene glycol and deionized water mixed in 9:1 volumetric ration including 0.5 wt.% NH 4 F. The microstructure and phase compositions of samples annealing from 0 °C to 800 °C were characterized by field-emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). FESEM showed that the obtained nanotubes with diameter 80–100 nm and length 4.89 μm were highly ordered and perpendicular to Ti substrate. The tubular structure collapsed at 680 °C. The photocatalytic activity of samples annealing at different temperature were calculated by the degradation of a model dye, methyl orange (MO), under UV light illumination. The results indicated the phase composition and the morphology of TiO 2 nanotubes both played an important role in the degradation of MO. In addition, the effects of initial solution pH and dye concentration on degradation of MO had also been investigated. As a result, the optimum values of calcination temperature, initial solution pH and dye concentration were found to be 550 °C, 3, 10 mg/l, respectively. The best photodegradation of MO was 76% under illumination for 3 h.