Electrochemical aspects and in vitro biocompatibility of polypyrrole/TiO2 ceramic nanocomposite coatings on 316L SS for orthopedic implants
Source abstract
Abstract
With a view to developing a smart coating combining both biocompatibility and corrosion resistance over bioimplants, polypyrrole/TiO2 nanocomposite coatings were electrochemically synthesized by cyclic voltammetric technique on 316L stainless steel (SS) in an aqueous solution of oxalic acid. The presence of TiO2 nanoparticles in polypyrrole (PPy) matrix was confirmed using FT-IR spectroscopy and XRD analysis. The surface morphology of coated 316L SS substrates was observed by the Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM). Microhardness of coated 316L SS was examined by the Vickers hardness method. The electrochemical studies were carried out using Cyclic Polarization and Electrochemical Impedance Spectroscopy (EIS) measurements. In order to describe the biocompatibility, contact angle measurements and in vitro characterization were carried out in Simulated Body Fluid (SBF) solution. The results showed that the nanocomposite coatings exhibit superior biocompatibility and enhanced corrosion protection performance over 316L SS than that of pure polypyrrole coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Coronary stents: a materials perspective
2. Surface characterization of AISI 316L biomaterials obtained by electropolishing in a magnetic field10.1016/j.surfcoat.2007.07.067 ↗
3. Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron10.1016/j.actbio.2010.11.001 ↗
4. Evaluation of the effect of three surface treatments on the biocompatibility of 316L stainless steel using human differentiated cells
5. Polypyrrole films on stainless steel10.1016/j.surfcoat.2005.04.011 ↗
6. Surface characterisation and electrochemical behavior of porous titanium dioxide coated 316L stainless steel for orthopedic applications10.1016/j.apsusc.2008.10.058 ↗
7. Sol–gel derived porous zirconium dioxide coated on 316L SS for orthopedic applications10.1007/s10971-009-2024-0 ↗
8. Synthesis and electrochemical characterization of porous niobium oxide coated 316L SS for orthopedic applications10.1016/j.matchemphys.2009.10.033 ↗
9. Stimulation of neurite outgrowth using an electrically conducting polymer10.1073/pnas.94.17.8948 ↗
10. Tissue reactions to polypyrrole-coated polyesters: a magnetic resonance relaxometry study10.1046/j.1525-1594.1999.06231.x ↗
11. Covalent attachment of proteins to functionalized polypyrrole-coated metallic surfaces for improved biocompatibility10.1016/j.actbio.2007.01.006 ↗
12. Polypyrrole–Heparin composites as stimulus-responsive substrate for endothelial cell growth10.1002/(SICI)1097-4636(199902)44:2<121::AID-JBM1>3.0.CO;2-A ↗
13. Electropolymerization of pyrrole on titanium substrates for the future development of new biocompatible surfaces
14. In vivo studies of polypyrrole/peptide coated neural probes
15. Electrochemical synthesis of polypyrrole films containing TiO2 powder particles10.1149/1.2086806 ↗
16. Anodic codeposition of polypyrrole and dispersed TiO210.1016/0013-4686(92)85066-T ↗
17. Synthesis and characterization of polypyrrole/TiO2 composites on mild steel10.1023/A:1004149421649 ↗
18. In vitro studies of hydrogen peroxide treated titanium for biomedical applications10.1016/j.electacta.2009.11.057 ↗
19. Electrochemical impedance spectroscopic characterization of titanium during alkali treatment and apatite growth in simulated body fluid10.1016/j.electacta.2007.06.040 ↗
20. Influence of potential on the electrochemical behavior of b titanium alloys in Hank’s solution10.1016/j.actbio.2007.02.009 ↗
21. How useful is SBF in predicting in vivo bone bioactivity10.1016/j.biomaterials.2006.01.017 ↗
22. Corrosion performance of conducting polymer coatings applied on mild steel10.1016/j.corsci.2004.07.005 ↗
23. Electrochemical actuator based on monolithic polypyrrole–TiO2 nanoparticle composite film10.1016/j.snb.2005.10.011 ↗
24. Vibrational spectroscopy of polypyrrole theoretical study10.1063/1.468620 ↗
25. Preparation and characterization of polypyrrole/TiO2 nanocomposite and its photocatalytic activity under visible light irradiation10.1557/jmr.2009.0316 ↗
26. Synthesis and characterization of uniform arrays of copper sulfide nanorods coated with nanolayers of polypyrrole10.1021/la020894w ↗
27. Photoelectrochemical and optical properties of nitrogen doped titanium dioxide films prepared by reactive DC magnetron sputtering10.1021/jp027345j ↗
28. New single-step electrosynthesis process of homogeneous and strongly adherent polypyrrole films on iron electrodes in aqueous medium10.1016/S0013-4686(02)00188-3 ↗
29. Synthesis and characterization of polypyrrole–TiO2 nanocomposites in supercritical CO210.1016/j.colsurfa.2007.04.114 ↗
30. Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions10.1016/j.corsci.2005.06.006 ↗
31. Wear resistance evaluation of plasma nitrocarburized AISI 316L stainless steel10.1016/S0254-0584(03)00234-7 ↗
32. Electrochemical and mechanical properties of polypyrrole coatings on steel10.1016/j.electacta.2004.01.074 ↗
33. Electrodeposition of polypyrrole–titanate nanotube composites coatings and their corrosion resistance10.1016/j.electacta.2010.09.094 ↗
34. Some aspects of corrosion and film formation of austenitic stainless steel type 316LN using electrochemical impedance spectroscopy (EIS)10.1007/s10853-006-0476-y ↗
35. Nanocomposite coatings on biomedical grade stainless steel for improved corrosion resistance and biocompatibility10.1021/am301559r ↗
36. Electrochemical and structural characterisation of zirconia reinforced hydroxyapatite bioceramic sol–gel coatings on surgical grade 316L SS for biomedical applications10.1016/j.ceramint.2005.11.011 ↗
37. Electrolytic deposition of fluorine-doped hydroxyapatite/ZrO2 films on titanium for biomedical applications10.1016/j.ceramint.2012.06.017 ↗
38. Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti10.1016/j.ceramint.2011.07.065 ↗
39. Hydrogen peroxide treatment on Ti6Al4V alloy: a promising surface modification technique for orthopedic application10.1016/j.apsusc.2009.09.069 ↗
40. Sol–gel synthesis and characterisation of nanoporous zirconium titanate coated on 316L SS for biomedical applications10.1007/s10971-011-2520-x ↗
41. Calcium phosphate coatings for bioimplant applications: materials, performance factors, and methodologies10.1016/j.mser.2009.05.001 ↗
42. Synthesis and characterization of nanoporous sodium-substituted hydrophilic titania ceramics coated on 316L SS for biomedical applications10.1007/s11998-011-9344-z ↗
43. Preparation and characterization of super-hydrophilic porous TiO2 coating films10.1016/S0254-0584(00)00364-3 ↗
44. The effect of surface chemistry modification of titanium alloy on signalling pathways in human osteoblasts
45. Bioactive carbonate–hydroxyapatite coatings deposited onto Ti6Al4V substrate10.1021/cm031164s ↗
46. In vitro behavior of bioactive phosphate glass–ceramics from the system P2O5Na2OCaO containing titania10.1016/j.ceramint.2008.06.004 ↗
47. Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials
48. Effect of surface treatment on the bioactivity of nickel–titanium10.1016/j.actbio.2008.05.010 ↗
49. K. Indira, U. Kamachi Mudali, N. Rajendran, Corrosion behavior of electrochemically assembled nanoporous titania for biomedical applications, Ceramics International. doi:10.1016/j.ceramint.2012.07.013.10.1016/j.ceramint.2012.07.013 ↗