Microwave dielectric properties of PTFE/CaTiO3 polymer ceramic composites
Source abstract
Abstract
Abstract CaTiO 3 ceramic powder filled polytetrafluoroethylene (PTFE) composites with various filler volume fractions up to 60 vol.% were prepared. The effects of volume fraction of the ceramic filler on the microstructure and microwave dielectric properties of the composites were investigated in detail. As the volume fraction of the ceramic filler increases, the dielectric constant ( ɛ r ) and the temperature coefficient of resonant frequency ( τ f ) of composites increase, while the product of quality factor and frequency ( Q × f ) decreases. Composites with 40 vol.% CaTiO 3 exhibited good microwave dielectric properties: ɛ r = 13 at ∼5 GHz, Q × f = 930 GHz, and τ f = 260 ppm/°C. Different mixing rules were used to predict the dielectric constant of composites, and it was found that the dielectric constants predicted by Effective Medium Theory (EMT) were in good agreement with experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Manufacturing experience with high performance mixed dielectric circuit boards10.1109/6040.763186 ↗
2. Polymer–ceramic composites for microwave applications: fabrication and performance assessment10.1109/TMTT.2006.885887 ↗
3. Dielectric response of high permittivity polymer ceramic composite with low loss tangent10.1063/1.3200244 ↗
4. Polymer nanocomposites with high dielectric strength and high frequency performance for embedded passive applications
5. Dielectric properties of SrTiO3/POE flexible composites for microwave applications10.1016/j.jeurceramsoc.2006.11.034 ↗
6. Effect of filler content and size on properties of PTFE/SiO2 composites10.1023/B:JPOL.0000004620.71900.16 ↗
7. Comparison of alumina and magnesia filled PTFE composites for microwave substrate applications10.1016/j.matchemphys.2008.07.089 ↗
8. Effect of filler content on the dielectric properties of PTFE/ZnAl2O4–TiO2 composites10.1111/j.1551-2916.2008.02365.x ↗
9. Low dielectric loss polytetrafluoroethylene/TeO2 polymer ceramic composites10.1111/j.1551-2916.2007.01914.x ↗
10. Low dielectric loss PTFE/CeO2 ceramic composites for microwave substrate applications10.1111/j.1744-7402.2008.02228.x ↗
11. Preparation and dielectric properties of bismuth based dielectric/PTFE microwave composites10.1016/j.jeurceramsoc.2005.09.048 ↗
12. Microwave dielectric properties of PTFE/rutile nanocomposites10.1016/j.jallcom.2008.10.092 ↗
13. Rutile filled PTFE composites for flexible microwave substrate applications10.1016/j.mseb.2009.04.011 ↗
14. PTFE/Sr2Ce2Ti5O16 polymer ceramic composites for electronic packaging applications10.1016/j.jeurceramsoc.2006.11.049 ↗
15. Structure-microwave property relations of Ca and Sr titanates10.1016/S0955-2219(01)00328-4 ↗
16. A dielectric resonator method of measuring inductive capacities in the millimeter range10.1109/TMTT.1960.1124749 ↗
17. Analysis and evaluation of a method of measuring complex permittivity and permeability of microwave insulators10.1109/TMTT.1970.1127271 ↗
18. Dielectric constant for binary piezoelectric 0–3 composites10.1063/1.354057 ↗
19. A simple explicit formula for effective dielectric constant of binary 0–3 composites10.1023/B:JMSC.0000013886.21054.e4 ↗
20. A precise numerical prediction of effective dielectric constant for polymer ceramic composites based on effective medium theory10.1109/6144.888853 ↗
21. Validation of a novel dielectric constant simulation model and determination of its physical parameters10.1016/S0026-2692(02)00038-1 ↗
22. Frequency-temperature compensation mechanism for bismuth based dielectric/PTFE microwave composites10.1007/s10832-007-9208-1 ↗