Multi-layered piezoelectric energy harvesters based on PZT ceramic actuators
Source abstract
Abstract
Abstract In this study, we have investigated 1–3 story structured piezoelectric energy harvesters based on lead zirconate titanate (PZT) multi-layered actuators. These piezoelectric energy harvesters were fabricated using Pb(Zr,Ti)O 3 based ceramic actuators. The multi-layered PZT actuators were based on green sheets that were prepared by a tape casting process. The ceramic actuators were attached on metallic electrodes with poled states. The structures were filled with polydimethylsiloxane (PDMS). The multi-layered piezoelectric energy harvesters were stacked as single-story structured, double-story structured, and triple-story structured devices, respectively. Generated output voltages, stored power, and maximum output power with various loads of the piezoelectric energy harvesters with various story structures were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Multilayer piezoelectric energy scavenger for large current generation10.1007/s10832-008-9439-9 ↗
2. On low- frequency electric power generation with PZT ceramics10.1109/TMECH.2005.844704 ↗
3. Comparative study between the pillar- and bulk-type multilayer structures for piezoelectric energy harvesters10.1002/pssa.201330505 ↗
4. Efficiency of energy conversion for devices containing a piezoelectric component10.1088/0960-1317/14/5/009 ↗
5. Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring10.1088/0964-1726/16/4/032 ↗
6. Modeling of piezoelectric actuator for compensation and controller design10.1016/S0141-6359(02)00183-6 ↗
7. Modeling of circular piezoelectric micro ultrasonic transducer using CuAl10Ni5Fe4 on ZnO film for sonar applications10.1134/S1063771011010180 ↗
8. A micro-machined piezoelectric hydrophone with hydrostatically balanced air backing10.1016/j.sna.2009.12.019 ↗
9. A ring-shaped piezoelectric transformer operating in the third symmetric extensional vibration mode10.1016/S0924-4247(00)00495-7 ↗
10. Properties of step-down multilayer piezo stack transformers using PNN-PMN-PZT ceramics with CeO2 addition10.3938/jkps.58.580 ↗
11. An approach to design a high power piezoelectric ultrasonic transducer10.1007/s10832-007-9408-8 ↗
12. Advances in energy harvesting using low profile piezoelectric transducers10.1007/s10832-007-9043-4 ↗
13. Integrated of perovskite PZT thin films on diamond substrate without buffer layer10.1088/0022-3727/45/20/202001 ↗
14. Camber development during co-firing Ag-based low dielectric constant ceramic package10.1557/JMR.1997.0365 ↗
15. On low-frequency electric power generation with PZT ceramics10.1109/TMECH.2005.844704 ↗
16. Comparison of electroactive polymers for energy scavenging applications10.1088/0964-1726/19/8/085012 ↗