Effect of nanocarbon sources on microstructure and mechanical properties of MgO–C refractories
Source abstract
Abstract
Abstract A study of microstructural evolution, mechanical and thermo-mechanical properties of MgO–C refractories, based on graphite oxide nanosheets (GONs), carbon nanotubes (CNTs) and carbon black (CB), was carried out by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS), three-point bending and thermal shock tests. Meanwhile, these results were compared to the conventional MgO–C refractory containing 10 wt% flaky graphite prepared under the same conditions. The results showed that higher cold modulus of rupture was obtained for the composition containing GONs, and the composition containing CNTs exhibited larger displacement after coking at 1000 °C and 1400 °C. Also, the addition of nanocarbons led to an improvement of the thermal shock resistance; in particular, both compositions containing CNTs and CB had higher residual strength ratio, approaching the thermal shock resistance of the reference composition containing 10 wt% flaky graphite, as it was associated with the presence of nanocarbons and in-situ formation of ceramic phases in the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Thermochemistry and microstructures of MgO–C refractories containing various antioxidants10.1016/S0955-2219(00)00308-3 ↗
2. Carbon based refractories
3. I. Bae, M. Kim, D. Chung, M. Shin, Y. Seo, The improvement of MgO–C bricks toughness for RH snorkels, in: Proceedings of UNITECR'05 Congress, 8–11 November, Orlando, USA, 2005.
4. The progress of low-carbon MgO–C composite study
5. Current situation and development of low-carbon magnesia–carbon materials research
6. S. Tamura, T. Ochiai, S. Takanaga, T. Kanai, H. Nakamura, Nano-tech. refractories-1: the development of nano structured matrix, in: Proceedings of UNITECR'03 Congress, 19–22 October, Osaka, Japan, 2003, pp. 517–520.
7. S. Takanaga, T. Ochiai, S. Tamura, T. Kanai, H. Nakamura, Nano-tech. refractories-2: the application of the nano structural matrix to MgO–C bricks, in: Proceedings of UNITECR'03 Congress, 19–22 October, Osaka, Japan, 2003, pp. 521–524.
8. S. Takanaga, Y. Fujiwara, M. Hatta, T. Ochiai, S..Tamura, Nano-tech. refractories-3: development of “MgO-rimmed MgO–C brick”, in: Proceedings of UNITECR'05 Congress, 8–11 November, Orlando, USA, 2005.
9. Y. Shiratani, T. Yotabun, K. Chihara, T. Ochiai, S. Tamura, Nano-tech. refractories-4: the application of the nano structual matrix to SN plates, in: Proceedings of UNITECR'05 Congress, 8–11 November, Orlando, USA, 2005.
10. M. Hatta, S. Takanaga, O. Matsuura, T. Ochiai, S. Tamura, Nano-tech. refractories-5: the application of B4C–C nano particles to MgO–C bricks, in: Proceedings of UNITECR'07 Congress, 18–21 September, Dresden, Germany, 2007, p. 614.
11. S. Tamura, Y. Urushibara, O. Matsuura, T. Shin, Nano-tech. refractories-6: observation of the texture after carbonization of nano-tech. refractories, in: Proceedings of UNITECR'07 Congress, 18–21 September, Dresden, Germany, 2007, p. 627.
12. H. Hattanda, T. Yotabun, T. Tsuda, T. Ochiai, S. Tamura, Nano-tech. refractories-7: application of nano structured matrix to SN plates, in: Proceedings of UNITECR'07 Congress, 18–21 September, Dresden, Germany, 2007, pp. 204–207.
13. S. Tamura, T. Ochiai, S. Takanaga, T. Kanai, H. Nakamura, Nano-tech. refractories-8: technological philosophy and evolution of nano-tech. refractories, in: Proceedings of UNITECR'11 Congress, October 30–November 2, Kyoto, Japan, 2011.
14. H. Yasumitsu, M. Hirashima, O. Matsuura, S. Takanaga, T. Ochiai, S. Tamura, Nano-tech. refractories-9: the basic study on the formation of the nano structured marix in MgO–C bricks, in: Proceedings of UNITECR'11 Congress, October 30–November 2, Kyoto, Japan, 2011.
15. Study on low carbon containing MgO–C refractory: use of nano carbon10.1016/j.ceramint.2011.10.086 ↗
16. Nano carbon containing MgO–C refractory: effect of graphite content10.1016/j.ceramint.2012.02.082 ↗
17. Microstructures and mechanical properties of Al2O3–C refractories with addition of multi-walled carbon nanotubes10.1016/j.msea.2012.04.001 ↗
18. Y. Matsuo, M. Tanaka, J. Yoshitomi, S. Yoon, J., Miyawaki, Effect of the carbon nanofiber addition on the mechanical properties of MgO–C brick, in: Proceedings of UNITECR'11 Congress, October 30–November 2, Kyoto, Japan, 2011.
19. Microstructure and mechanical properties of MgO–C refractories containing graphite oxide nanosheets (GONs)10.1016/j.ceramint.2012.09.080 ↗
20. Microstructure and mechanical properties of MgO–C refractories containing expanded graphite10.1016/j.ceramint.2012.11.049 ↗
21. Strengthening mechanism of graphene oxide nanosheets for Al2O3–C refractories
22. Improved thermal shock performance of Al2O3–C refractories due to nanoscaled additives10.1016/j.ceramint.2011.08.011 ↗
23. Microstructure evaluation of MgO–C refractories with TiO2- and Al-additions10.1016/j.jeurceramsoc.2006.03.001 ↗
24. Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO–C refractories matrix10.1016/j.ceramint.2008.03.001 ↗
25. In-situ formation of spinel fibers in MgO–C refractory matrixes10.1007/s11595-009-6896-1 ↗
26. The development of refractories by applying nano-technology
27. Development of refractories by applying nano technology
28. The influence of nanometer carbon black on the mechanical properties of phenolic resin