A comparative study of the corrosion performance of titanium (Ti), titanium nitride (TiN), titanium dioxide (TiO2) and nitrogen-doped titanium oxides (N–TiO2), as coatings for biomedical applications
Source abstract
Abstract
Abstract The performance of four titanium coatings, namely, Ti, TiN, TiO 2 , and N–TiO 2 was assessed in terms of their surface properties and electrochemical corrosion in simulated body fluid in relation to their medical applications. Ti, TiN, TiO 2 , and N–TiO 2 coatings were deposited onto stainless steel substrates by a plasma surface alloying technique. Morphology, composition, and structure were investigated by SEM, GDOES, and XRD. Corrosion resistance results indicated that Ti, TiN, TiO 2 , and N–TiO 2 coatings could achieve higher corrosion polarization resistance and a more stable corrosion potential in the SBF environment than the uncoated stainless steel substrate SS316L. In comparison with the Ti, TiN, and TiO 2 coatings, the N–TiO 2 coating exhibited superior corrosion resistance. This resistance may be attributed to the multilayered structure of the coating (an outer oxidative layer and an inner diffusion zone of Ti and N), which can hinder the diffusion of reactive ions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Antibacterial properties of an austenitic antibacterial stainless steel and its security for human body
2. Antibacterial properties, corrosion resistance and mechanical properties of Cu-modified SUS 304 stainless steel10.1016/j.msea.2004.10.032 ↗
3. In situ electrochemical impedance and noise measurements of corroding stainless steel in high temperature water10.1016/j.electacta.2005.10.013 ↗
4. Microstructure and dry-sliding wear properties of TiC-reinforced composite coating prepared by plasma-transferred arc weld-surfacing process10.1016/j.msea.2006.12.086 ↗
5. Corrosion-resistant coatings: a nanotechnology approach10.1108/00035590110398899 ↗
6. Sol–gel thin films for corrosion protection10.1016/0272-8842(95)94466-N ↗
7. Anti-corrosion characteristics of nitride-coated AISI 316L stainless steel coronary stents10.1016/j.surfcoat.2004.12.015 ↗
8. Hardness and corrosion protection enhancement behaviour of surgical implant surfaces treated with ceramic thin films10.1016/S0257-8972(99)00221-2 ↗
9. Synthesis and characterization of TiN, TiAIN and TiN/TiAIN biocompatible coatings10.1016/j.surfcoat.2005.02.140 ↗
10. Corrosion and tribological properties and impact fatigue behaviors of TiN- and DLC-coated stainless steels in a simulated body fluid environment10.1016/j.surfcoat.2010.07.111 ↗
11. Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique10.1016/j.apsusc.2012.04.041 ↗
12. Study on the thermal erosion, wear and corrosion behaviors of TiAlN/oxynitriding duplex-treated AISI H13 alloy steel10.1016/j.surfcoat.2012.07.080 ↗
13. Mechanical and corrosive characteristics of Ta/TaN multilayer coatings10.1016/j.vacuum.2012.05.024 ↗
14. Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings10.1016/j.surfcoat.2011.10.029 ↗
15. Nitriding of stainless steel and aluminum alloys by plasma immersion ion implantation10.1016/S0257-8972(00)00638-1 ↗
16. Nitrogen and carbon expanded austenite produced by PI310.1016/S0257-8972(00)01050-1 ↗
17. An investigation on the microstructure, tribological and corrosion performance of AISI 321 stainless steel carbonitrided by RF plasma process10.1016/j.surfcoat.2010.08.036 ↗
18. Formation and properties of a carbonitrided layer in 304 stainless steel using different radio frequency plasma powers10.1016/S0040-6090(01)01729-1 ↗
19. Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater10.1016/j.surfcoat.2013.03.034 ↗
20. Impact wear resistance of plasma diffusion treated and duplex treated/PVD-coated Ti–6Al–4V alloy10.1016/j.surfcoat.2011.10.054 ↗
21. Structural investigation and wear resistance of submicron TiN coatings obtained by a hybrid plasma immersion ion implantation process10.1016/S0257-8972(01)01216-6 ↗
22. The effects of metal ion post-implantation on the near surface properties of TiN deposited by CVD10.1016/S0257-8972(00)00942-7 ↗
23. Tribological behaviours of patterned PVD TiN spot coatings on M2 steel coated with different bias voltages10.1016/j.surfcoat.2005.05.003 ↗
24. Grain boundary sensitization and desensitization during the ageing of 316 L(N) austenitic stainless steels10.1007/BF01130196 ↗
25. Three-dimensional atom probe analysis of intergranular segregation and precipitation behavior in Ti–Nb–stabilized low-Cr ferritic stainless steel10.1016/j.scriptamat.2012.10.022 ↗
26. Effect of chromium content on intergranular corrosion and precipitation of Ti-stabilized ferritic stainless steels10.1016/j.corsci.2010.01.037 ↗
27. The influence of active screen plasma nitriding parameters on corrosion behavior of a low-alloy steel10.1016/j.jallcom.2009.03.161 ↗
28. Improvement of corrosion and wear resistances of AISI 420 martensitic stainless steel using plasma nitriding at low temperature10.1016/j.surfcoat.2007.09.036 ↗
29. Improvement of corrosion resistance of austenitic stainless steels by means of glow-discharge nitriding10.1515/CORRREV.2011.004 ↗
30. Tribological behaviors of single and dual sol–gel ceramic films on Ti–6Al–4V10.1016/j.ceramint.2008.08.009 ↗
31. Influence of ultraviolet light irradiation on corrosion behavior of weathering steel with and without TiO2-coating in 3mass% NaCl solution10.1016/j.scriptamat.2005.07.039 ↗
32. Bacterial adhesion to titanium-oxy-nitride (TiNOX) coatings with different resistivities: a novel approach for the development of biomaterials10.1016/S0142-9612(01)00404-5 ↗
33. Wear and corrosion protection of 316-L femoral implants by deposition of thin films10.1016/S0257-8972(01)01321-4 ↗
34. Biocompatibility of a titanium–aluminum nitride film coating on a dental alloy10.1016/j.surfcoat.2004.07.050 ↗
35. Evaluation of TiO2 coatings obtained using the sol–gel technique on surgical grade type 316 L stainless steel in simulated body fluid10.1016/j.matlet.2005.05.036 ↗
36. Double glow plasma surface alloying and plasma nitriding10.1016/j.surfcoat.2006.07.187 ↗
37. Band-gap narrowing of titanium dioxide by nitrogen doping10.1143/JJAP.40.L561 ↗
38. Nitrogen-doped TiO2 from TiN and its visible light photoelectrochemical properties10.1016/j.elecom.2007.12.037 ↗
39. Factors affecting cathodic-protection interference10.1016/j.enganabound.2006.11.003 ↗
40. Electrochemical corrosion behavior of Ti–24Nb–4Zr–8Sn alloy in a simulated physiological environment10.1016/j.apsusc.2011.12.096 ↗
41. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
42. Correlation between critical pitting temperature and degree of sensitisation on alloy 2205 duplex stainless steel10.1016/j.corsci.2010.10.009 ↗
43. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1 M NaCl at various molybdate concentrations10.1016/j.corsci.2010.08.008 ↗
44. Corrosion and wear-corrosion behavior of NiTi modified by plasma source ion implantation10.1016/S0142-9612(03)00271-0 ↗