Use of boron wastes in the production of heavy clay ceramics

Abstract Colemanite, ulexite and tincal are the main boron ores found in Turkey and account to 63% of the world estimated reserves. The production route of boron products results in significant amounts of different types of Boron Wastes, BW. Their open field disposal raises substantial environmental concerns in fear of leaching and groundwater pollution. The heavy clay ceramic industry can potentially absorb substantial quantities of BW. In the present study, BW produced from Kirka borax plants in Turkey, with 12.6 wt.% B 2 O 3 was introduced in 0 wt.%, 5 wt.% and 15 wt.% in a heavy clay body mixture. Four peak temperatures, 800 °C, 850 °C, 900 °C and 950 °C, were examined for the dry pressed samples. The thermal behaviour analyzed by dilatometry and TGA shows that major loss in weight starts about 600 °C and continues to 700 °C approximately. For 5 wt.% BW addition and firing at 900–950 °C, the sintered bodies present comparable or improved physical and mechanical properties with respect to the reference formulation. The microstructure was analyzed by SEM whereas the main crystalline phases were identified by XRD. Samples fired at 900 °C with 5 wt.% BW present comparable properties with the reference ones. At 950 °C, the obtained properties were improved. Deformation occurs for samples with 15 wt.% BW when fired at >900 °C.